GENERAL INFORMATION
Modification / alterations
to the electrical or fuel
systems
EB11A-D
MITSUBISHI has always manufactured
safe, high quality vehicles. In order to
maintain this safety and quality, it is impor-
tant that any accessory that is to be fitted,
or any modifications that are to be carried
out which involve the electric or fuel sys-
tems, should be carried out in accordance
with MITSUBISHI guidelines.
CAUTIONPlease consult an authorized MIT-
SUBISHI dealer concerning any
such fitment or modification.
If the wires interfere with the vehicle
body or if improper installation
methods are used (protective fuses
not included, etc.), electronic de-
vices may be adversely affected, re-
sulting in fire or an other accident.
Roof drip moulding*EB10A-Fb
When installing the roof rack, use the
brackets (A).
There are brackets (A) under roof drip
moulding (B).
NOTE
(1) Use a genuine MITSUBISHI roof car-
rier, since the brackets to be used are
of special shape. For details, consult
a nearby authorized MITSUBISHI
dealer.
(2) For the roof load, refer to page 10-6,
10-12, 10-19.
Roof carrier precaution
EB10A-S
CAUTION(1) Make sure that the weight of the
luggage does not exceed the al-
lowable roof load.
If the allowable roof load is ex-
ceeded, this may cause damage
to the vehicle.
The roof load is the total allow-
able load on the roof (the weight
of the roof carrier plus the
weight of luggage placed on the
roof carrier).
For specific figures, please refer
to the “Maximum roof load” on
page 10-6, 10-12, 10-19.
B10A013
AB
1-15
01engL2_240082_4 22-01-2004 12:58 Page 1-15
