2004 MITSUBISHI ENDEAVOR 1032

[x] Cancel search: 1032

Page 2051 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual 2. Turn the ignition switch to the "ON" position.  
3. Check if the DTC is set.  
4. Turn the ignition switch to the "LOCK" (OFF) position.  Q: Is the check result satisfactory?
  
YES

Page 2054 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual Fig. 41: Identifying Connectors C
-16 And C
-17 
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 
DTC SET CONDITION 
DTC B1031 is set if there is a short circuit in the A/C pressure sensor input 
circ

Page 2055 of 3870

MITSUBISHI ENDEAVOR 2004  Service Repair Manual CURRENT TROUBLE 
The A/C-ECU, the A/C pressure sensor or the connector(s) or wiring between 
the two may be defective  
PAST TROUBLE 
If DTC B1031 or B1032 is stored as a past trouble, carry out diagn