2004 MITSUBISHI ENDEAVOR steering

spring to the column switch.
2. Align the mating marks of the steering wheel sensor as follows.
Fig. 254: Connecting Steering Wheel Sensor Connector

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
1. Turn the steering wheel sensor clockwise fully. Then turn it back
approximately 2-3/4 turns counterclockwise to align the mating marks.
2. Ali
gn the matin
g marks on the clock s
prin
g and the steerin
g wheel sensor, CAUTION: Ensure that the steering wheel sensor's mating
marks are properly aligned. If not, the steering
wheel sensor could be damaged.

2004 Mitsubishi Endeavor LS
2004 BRAKES Traction Control, Active Skid Control System - Endeavor

and install the steering wheel sensor to the column switch assembly.
3. Connect the steering wheel sensor connector.
SPECIFICATIONS FASTENER TIGHTENING SPECIFICATION FASTENER TIGHTENING SPECIFICATION SERVICE SPECIFICATIONS SERVICE SPECIFICATION ITEM
SPECIFICATION
Brake tube flare nut
15 +/- 2 N.m (12 +/- 1 ft-lb)
ITEM
STANDARD VALUE
Wheel speed sensor internal resistance kohm
1.24 - 1.64

2004 Mitsubishi Endeavor LS
2004 BRAKES Traction Control, Active Skid Control System - Endeavor

2004 Mitsubishi ENDEAVOR 04 - Other Fuel > FUEL SYSTEM, OTHER [Part
090000 ]
TSB No: 0413001 NHTSA ID: , January 01, 2004 : Replacement:
Summary: electronic throttle valve (etv) initialization procedures - service manual
revision. 2004 lancer and lancer sportback models also included. *tt

2004 Mitsubishi ENDEAVOR 04 - Power Steering > STEERING : HYDRAULIC
POWER ASSIST SYSTEM [Part 015000 ]
TSB No: 0437A001 NHTSA ID: , January 01, 2004 : Replacement:
Summary: power steering pump pressure switch replacement part availability. *tt

2004 Mitsubishi ENDEAVOR 04 - Body > STRUCTURE : BODY [Part 162000 ]
TSB No: 0342B004 NHTSA ID: , October 01, 2003 : Replacement:
Summary: water leakage may occur at the floorboard due to possible conditions. water in
the floorboard can eventually saturate the silencers under carpet, causing a musty smell.
*tt

2004 Mitsubishi ENDEAVOR 04 - Windshield Blower > VISIBILITY :
DEFROSTER/DEFOGGER SYSTEM : WINDSHIELD : BLOWER [Part 138110 ]
TSB No: 0355008 NHTSA ID: , October 01, 2003 : Replacement:
Summary: debris (such as leaves, etc) entering the front cowl area may clog the
evaporator housing drain tube. if this occurs, the evaporator housing may fill up with
condensation and overflow into the passenger compartment, and into the blower mot

2004 Mitsubishi ENDEAVOR 04 - Windshield Blower > VISIBILITY :
DEFROSTER/DEFOGGER SYSTEM : WINDSHIELD : BLOWER [Part 138110 ]
TSB No: 0355008R NHTSA ID: , October 01, 2003 : Replacement: 0355003
Summary: debris (such as leaves, etc.) entering the front cowl area may clog the
evaporator housing drain tube. if this occurs, the evaporator housing may fill up with
condensation and overflow into the passenger compartment, and into the blower mo

2004 Mitsubishi ENDEAVOR 04 - Body > STRUCTURE : BODY [Part 162000 ]
TSB No: 0342B003 NHTSA ID: , October 01, 2003 : Replacement: