2004 MERCEDES-BENZ CL-Class radio

13 At a glance
Satellite radio* operating elements
Function
Page
1
Satellite radio main menu
Switching satellite radio
operation on and off
80
80
2
Soft keys
(multifunction keys)
3
Color screen with Satellite
radio main menu
4
1 - 0
Station selection
Saving stations manually
82
83
5
H,h,g,G
Function selection
6
E Confirm
Function
Page
7
J
Muting
80
8
Volume control
24
9
e Switching on and off
23
a,
b
d and D
Previous or next channel
81

20 At a glanceMenu system

Menu systemThe menu system allows for easy
operation of COMAND.
Main menus are provided for the following
main functions:
Audio
(radio, tape, CD, CDC*, MP3-CD, DVD)

Telephone*

Navigation

Service
Calling up main menus
Audio (
page 30):

Press A.
Satellite radio* (
page 80):

Press B.Telephone* (
page 96):

Press a.
Navigation (
page 114):

Press b.
Service (
page 164):

Press C.
Menu display
A display may consist of three areas.
Example: FM menu1Soft key sections
2Main area
3Status bar
The functions currently assigned to the
soft keys are displayed in the soft key
sections 1.
iA maximum of five soft keys may be
displayed on each side of the main area
2.

21 At a glance
Menu system
The main area 2 shows messages and
settings.
You can change the settings by operating
the system.
The status bar 3 is divided into three
areas.
Left side:
The current operating mode is indicated. In
this example: Radio
Center:
The status of the current operating mode
or other selectable functions are indicated.
In this example:
FM
= current waveband

9
= memory location of station,
e.g. “9”Right side:
General status information is indicated
independent of the operating mode.
In this example:

Ready
= Telephone* is ready for
operation

= Reception strength of the
mobile phone
Menu functions and submenus
Using the soft keys, functions can be
switched ON or OFF, or submenus can be
called up.Example: Radio main menu:

The
FM/AM
soft key switches between
FM and AM band.

The
Scan
soft key starts/stops the
channel scan.
In some situations, soft keys may not have
any function and are not operational. A
soft key without function appears shaded
out.

23 At a glance
Quick reference COMAND
Switching on
Turn the key in the steering column
lock to position 1 or 2.
or

Press e.
In both cases, the system will activate
the operating mode which was active
when the system was switched off.Switching off

Turn the key in the steering column
lock to position 0 and pull the key out.
or

Press e.
The volume is adjusted jointly for the
telephone*, the navigation system and the
Voice control system.
The volume setting applies to other
operating modes as well: radio, tape, CD,
CD changer*, MP3-CD and DVD.
When you adjust the volume, the system
will automatically store the setting for the
current operating mode. The volume for
the navigation announcements can only be
changed while an announcement is being
made.
iYou have the following options to
control the system:
at the COMAND

at the multifunction steering wheel
(refer to vehicle Operator's Manual)

using the Voice control system*
(refer to separate operating
instructions for further information)
This Operator’s Manual describes the
control at the COMAND.
Unless otherwise indicated, the
descriptions and illustrations refer to
the COMAND.
Switching the COMAND control unit
on and offiIf the key is not in the steering lock in
position 1 or 2, the system will
automatically stop after around 30
minutes. A warning is displayed prior to
the system switching off.
Volume

Quick reference COMAND

25 At a glance
Quick reference COMAND
Common balance and fader settings apply
to the following sytems:
Radio operation

Tape operation

CD operation (single CD)

CD changer* operation

MP3-CD operation

DVD operation
Different balance and fader settings can be
set for navigation and telephone*.The balance/fader settings for navigation
announcements are described at “Audio
settings for the navigation
announcements” (
page 117).
When you make balance or fader settings,
the system will automatically save the
settings for the current operating mode
and others.
Setting balance and fader
In radio, tape, CD, CDC*, MP3-CD or DVD
operation:

Press the
Bal/Fad
soft key.
Cross-hairs are displayed. The
horizontal line indicates the balance
setting. The vertical line indicates the
fader setting. You can now make
balance and fader settings.
Balance and fader

26 At a glanceQuick reference COMAND
Press H or h.
Move the cross-hairs horizontally and
adjust the balance.
or

Press g or G.
Move the cross-hairs vertically and
adjust the fader.

Press E or the
Back
soft key.
or

Wait until the display changes.
The new setting is saved.Different bass and treble settings are
possible for the following operating
modes:

Radio operation (FM and AM band)

Tape operation

CD operation (single CD)

CD changer* operation

MP3-CD operation

DVD operation

Navigation operation
The Bass/Treble settings for navigation
announcements are described at “Audio
settings for the navigation
announcements” (
page 117).When you adjust Bass or Treble, the
system will automatically save the settings
for the current operating mode.
Activating the Bass or Treble menu
In radio, tape, CD, CDC*, MP3-CD or DVD
operation:

Press the Bass or Treble soft key.
The Bass or Treble menu will appear.
You can now make bass or treble
settings (
page 27).
iUse F and f to move the
cross-hairs diagonally.
Bass and Treble

27 At a glance
Quick reference COMAND
Bass and Treble Control
Activate the Bass or Treble menu
(page 26).

Press H or h.
Bass or Treble is adjusted.

Press E or the
Back
soft key.
or

Wait until the display changes.
The new setting is saved.If your vehicle is provided with the sound
system*, the sound functions* will be
available for the following operating
modes.

Radio operation

Tape operation

CD operation

MP3-CD operation
The following sound functions* are
available:

Default:COMAND set the sound linear for the
center of the vehicle.

Front optimized:COMAND set the sound linear for the
front of the vehicle.

Rear optimized:COMAND set the sound linear for the
rear of the vehicle.

Speech optimized:Playback optimised for language
comprehensibility.

Surround:Surround playback (not for radio).
You can use different sound functions* for
the modes mentioned above.
Example:
For radio operation the function
Default
, for CD operation the function
Surround
.
Sound functions*

28 At a glanceQuick reference COMANDActivating the sound functions*
In radio, tape, single CD or CD changer*
operation:
Activate the main menu for the
respective operating mode
(page 20).

Press the
Sound
soft key.
The Sound menu appears.

Press g or G to select the desired
function.

Press E.
The function is activated.
iSurround sound offers a sound quality
superior to conventional stereo sound.
If the radio reception is poor, the
system should be switched back to
standard stereo playback. Switching
back to standard stereo playback may
improve reception quality.