142 NavigationDuring route guidanceDeleting the active via route
Press g to select option
Delete
Active Via
.
Press E.
The system deletes the via route and
recalculates the route to the
destination.Changing the active via route
Press g to select option
Change
Active Via
.
Press E.
The list for selecting another via route
appears.
Use G or g to select the desired via
route.
Press E.
The system recalculates the route.The detour function blocks a route section
ahead. If possible, the system will
calculate a detour. You can adjust the
length of the route section to be blocked.
Switching on
Activate the soft key display
(page 139).
Press the
Detour
soft key.
Selecting a detouriIf the system does not allow you to
block a route section, the message
No
Detour Possible
is displayed.
Traffic jams are identified by the driver,
not by the COMAND.
iIf you have already placed a block on a
route section,
Detour
appears written
in black. A menu will appear instead of
the map (
page 143).
143 Navigation
During route guidance
You can now enter the length of the route
section to be blocked.
Press the
More
soft key until the
desired length is set.
Press the
Less
soft key to reduce the
length of the traffic jam.
Press E.
The system calculates a new route
around the blocked route section.Switching off
Activate the soft key display
(page 139).
Press the
Detour
soft key.
Press g to select
Delete Detour
.
Press E.
The blocked route section is deleted.
The system calculates the new route.Changing the blocked route section
Activate the soft key display
(page 139).
Press the
Detour
soft key.
Use G to select item
Reset Detour
.
Press E.
You can now change the length of the
route section to be blocked.
Press the
More
soft key until the
desired length is set.
Press the
Less
soft key to reduce the
length of the blocked route section.
Press E.
The system calculates a new route
around the blocked route section.
