DI-72
WARNING CHIME
Revision: 2004 November 2004 FX35/FX45
5. CHECK KEY SWITCH CIRCUIT
1. Disconnect BCM connector.
2. Check continuity between BCM harness connector M3 terminal
37 (B/W) and key switch harness connector M23 terminal 1 (B/
W).
3. Check continuity between BCM harness connector M3 terminal
37 (B/W) and ground.
OK or NG
OK >> GO TO 6.
NG >> Repair harness or connector.
6. CHECK KEY SWITCH POWER SUPPLY CIRCUIT
Check voltage between key switch harness connector M23 terminal
2 (L/R) and ground.
OK or NG
OK >> Replace BCM. Refer to BCS-15, "Removal and Installa-
tion of BCM" .
NG >> Check harness for open or short between key switch
and fuse.
Key Warning Chime Does Not Operate (With Intelligent Key, When Mechanical
Key Is Used)
AKS0079U
1. CHECK FUSE
Check if the key switch and ignition knob switch 10A fuse (No. 38, located in the fuse and fusible link box) is
blown. Refer to DI-59, "
Wiring Diagram — CHIME —" .
Is the fuse blown?
YES >> Replace fuse. Be sure to repair the cause of malfunction before installing new fuse.
NO >> GO TO 2.
2. CHECK WARNING CHIME OPERATION
Check the chime under conditions in exception of key warning chime (when mechanical key is used) opera-
tion.
Does warning chime sound?
YES >> GO TO 3.
NO >> Go to DI-68, "
All Warnings Are Not Operated" or DI-69, "Key Warning Chime and Light Warning
Chime Does Not Operate (Seat Belt Warning Chime Does Operate)" . Continuity should exist.
Continuity should not exist.
SKIA5050E
Battery voltage should exist.
SKIA5051E
DI-74
WARNING CHIME
Revision: 2004 November 2004 FX35/FX45
6. CHECK KEY SWITCH CIRCUIT
1. Disconnect BCM connector.
2. Check continuity between BCM harness connector M3 terminal
37 (B/W) and key switch and ignition knob switch harness con-
nector M22 terminal 4 (B/W).
3. Check continuity between BCM harness connector M3 terminal
37 (B/W) and ground.
OK or NG
OK >> Replace BCM. Refer to BCS-15, "Removal and Installa-
tion of BCM" .
NG >> Repair harness or connector.
Key Warning Chime Does Not Operate (With Intelligent Key, When Intelligent
Key Is Carried With The Driver)
AKS0079V
1. CHECK WARNING CHIME OPERATION
Check the chime under conditions in exception of key warning chime (when Intelligent Key is carried with the
driver) operation.
Does warning chime sound?
YES >> GO TO 2.
NO >> Go to DI-68, "
All Warnings Are Not Operated" or DI-69, "Key Warning Chime and Light Warning
Chime Does Not Operate (Seat Belt Warning Chime Does Operate)" .
2. CHECK INTELLIGENT KEY UNIT SELF-DIAGNOSTIC
Perform the Intelligent Key unit self-diagnosis. Refer to BL-114, "
CONSULT-II Functions" .
OK or NG
OK >> GO TO 3.
NG >> Check the applicable parts.Continuity should exist.
Continuity should not exist.
SKIA5062E
DI-76
WARNING CHIME
Revision: 2004 November 2004 FX35/FX45
6. CHECK IGNITION KNOB SWITCH CIRCUIT
1. Disconnect Intelligent Key unit connector.
2. Check continuity between Intelligent Key unit harness connector
M34 terminal 27 (L/W) and key switch and ignition knob switch
harness connector M22 terminal 2 (L/W).
3. Check continuity between Intelligent Key unit harness connector
M34 terminal 27 (L/W) and ground.
OK or NG
OK >> Replace Intelligent Key unit. Refer to BL-146, "Removal
and Installation of Intelligent Key Unit" .
NG >> Repair harness or connector.
Light Warning Chime Does Not OperateAKS007OJ
1. CHECK WARNING CHIME OPERATION
Check the chime under conditions in exception of light warning chime operation.
Dose warning chime sound?
YES >> GO TO 2.
NO >> Go to DI-68, "
All Warnings Are Not Operated" .
2. CHECK BCM INPUT SIGNAL
1. Select “BCM”.
2. With “DATA MONITOR” of “BUZZER”, confirm “TAIL LAMP SW”
when the lighting switch is operated.
OK or NG
OK >> Replace BCM. Refer to BCS-15, "Removal and Installa-
tion of BCM" .
NG >> Check the lighting switch. Refer to LT- 1 0 8 , "
Removal
and Installation" . Continuity should exist.
Continuity should not exist.
SKIA5067E
Lighting switch ON (1st
position): TAIL LAMP SW ON
Lighting switch OFF : TAIL LAMP SW OFF
SKIA2081E
INDEX FOR DTC
EC-15
[VQ35DE]
C
D
E
F
G
H
I
J
K
L
MA
EC
Revision: 2004 November 2004 FX35/FX45
[VQ35DE]INDEX FOR DTCPFP:00024
Alphabetical IndexABS006JV
NOTE:
If DTC U1000 or U1001 is displayed with other DTC, first perform the trouble diagnosis for DTC U1000,
U1001. Refer to EC-142, "
DTC U1000, U1001 CAN COMMUNICATION LINE" .
×:Applicable —: Not applicable
Items
(CONSULT-II screen terms)DTC*
1
TripMIL lighting
upReference page
CONSULT-II
GST*
2ECM*3
A/T INTERLOCK P1730 1730 1×AT- 1 4 7
A/T TCC S/V FNCTN P0744 0744 2×AT- 1 2 5
ACC COMMAND VALUE*8P1568 1568 1 —EC-521
APP SEN 1/CIRC P2122 2122 1×EC-555
APP SEN 1/CIRC P2123 2123 1×EC-555
APP SEN 2/CIRC P2127 2127 1×EC-562
APP SEN 2/CIRC P2128 2128 1×EC-562
APP SENSOR P2138 2138 1×EC-576
ASCD BRAKE SW*7P1572 1572 1 —EC-522, EC-532
ASCD SW*7P1564 1564 1 —EC-508, EC-515
ASCD VHL SPD SEN*7P1574 1574 1 —EC-541, EC-543
ATF TEMP SEN/CIRC P0710 0710 2×AT- 1 3 9
BRAKE SW/CIRCUIT P1805 1805 2 —EC-550
CAN COMM CIRCUIT U1000
1000*51×EC-142
CAN COMM CIRCUIT U1001
1001*52—EC-142
CKP SEN/CIRCUIT P0335 0335 2×EC-302
CLOSED LOOP-B1 P1148 1148 1×EC-468
CLOSED LOOP-B2 P1168 1168 1×EC-468
CMP SEN/CIRC-B1 P0340 0340 2×EC-308
CMP SEN/CIRC-B2 P0345 0345 2×EC-308
CTP LEARNING P1225 1225 2 —EC-485
CTP LEARNING P1226 1226 2 —EC-487
CYL 1 MISFIRE P0301 0301 2×EC-291
CYL 2 MISFIRE P0302 0302 2×EC-291
CYL 3 MISFIRE P0303 0303 2×EC-291
CYL 4 MISFIRE P0304 0304 2×EC-291
CYL 5 MISFIRE P0305 0305 2×EC-291
CYL 6 MISFIRE P0306 0306 2×EC-291
D/C SOLENOID/CIRC P1762 1762 1×AT- 1 6 0
D/C SOLENOID FNCTN P1764 1764 1×AT- 1 6 2
ECM P0605 0605 1 or 2× or —EC-401
ECM BACK UP/CIRCUIT P1065 1065 2×EC-404
ECT SEN/CIRCUIT P0117 0117 1×EC-185
ECT SEN/CIRCUIT P0118 0118 1×EC-185
ECT SENSOR P0125 0125 1×EC-197
ENG OVER TEMP P1217 1217 1×EC-472
EC-16
[VQ35DE]
INDEX FOR DTC
Revision: 2004 November 2004 FX35/FX45
ENGINE SPEED SIG P0725 0725 2×AT-121
ETC ACTR P1121 1121 1×EC-415
ETC FUNCTION/CIRC P1122 1122 1×EC-417
E T C M O T P 11 2 8 11 2 8 1×EC-428
ETC MOT PWR P1124 1124 1×EC-423
ETC MOT PWR P1126 1126 1×EC-423
EVAP GROSS LEAK P0455 0455 2×EC-366
EVAP PURG FLOW/MON P0441 0441 2×EC-321
EVAP SMALL LEAK P0442 0442 2×EC-326
EVAP SYS PRES SEN P0451 0451 2×EC-349
EVAP SYS PRES SEN P0452 0452 2×EC-352
EVAP SYS PRES SEN P0453 0453 2×EC-358
EVAP VERY SML LEAK P0456 0456 2×EC-374
FR/B SOLENOID/CIRC P1757 1757 1×AT-156
FR/B SOLENOID FNCT P1759 1759 1×AT-158
FTT SEN/CIRCUIT P0182 0182 2×EC-279
FTT SEN/CIRCUIT P0183 0183 2×EC-279
FTT SENSOR P0181 0181 2×EC-273
FUEL LEV SEN SLOSH P0460 0460 2×EC-384
FUEL LEVEL SENSOR P0461 0461 2×EC-386
FUEL LEVL SEN/CIRC P0462 0462 2×EC-388
FUEL LEVL SEW/CIRC P0463 0463 2×EC-388
FUEL SYS-LEAN-B1 P0171 0171 2×EC-256
FUEL SYS-LEAN-B2 P0174 0174 2×EC-256
FUEL SYS-RICH-B1 P0172 0172 2×EC-265
FUEL SYS-RICH-B2 P0175 0175 2×EC-265
HLR/C SOL FNCTN P1769 1769 1×AT-166
HLR/C SOL/CIRC P1767 1767 1×AT-164
HO2S1 (B1) P0132 0132 2×EC-205
HO2S1 (B1) P0133 0133 2×EC-214
HO2S1 (B1) P0134 0134 2×EC-226
HO2S1 (B1) P1143 1143 2×EC-433
HO2S1 (B1) P1144 1144 2×EC-439
HO2S1 (B2) P0152 0152 2×EC-205
HO2S1 (B2) P0153 0153 2×EC-214
HO2S1 (B2) P0154 0154 2×EC-226
HO2S1 (B2) P1163 1163 2×EC-433
HO2S1 (B2) P1164 1164 2×EC-439
HO2S1 HTR (B1) P0031 0031 2×EC-149
HO2S1 HTR (B1) P0032 0032 2×EC-149
HO2S1 HTR (B2) P0051 0051 2×EC-149
HO2S1 HTR (B2) P0052 0052 2×EC-149
Items
(CONSULT-II screen terms)DTC*
1
TripMIL lighting
upReference page
CONSULT-II
GST*
2ECM*3
INDEX FOR DTC
EC-17
[VQ35DE]
C
D
E
F
G
H
I
J
K
L
MA
EC
Revision: 2004 November 2004 FX35/FX45HO2S2 (B1) P0138 0138 2×EC-236
HO2S2 (B1) P0139 0139 2×EC-245
HO2S2 (B1) P1146 1146 2×EC-446
HO2S2 (B1) P1147 1147 2×EC-457
HO2S2 (B2) P0158 0158 2×EC-236
HO2S2 (B2) P0159 0159 2×EC-245
HO2S2 (B2) P1166 1166 2×EC-446
HO2S2 (B2) P1167 1167 2×EC-457
HO2S2 HTR (B1) P0037 0037 2×EC-157
HO2S2 HTR (B1) P0038 0038 2×EC-157
HO2S2 HTR (B2) P0057 0057 2×EC-157
HO2S2 HTR (B2) P0058 0058 2×EC-157
I/C SOLENOID/CIRC P1752 1752 1×AT- 1 5 2
I/C SOLENOID FNCTN P1754 1754 1×AT- 1 5 4
IAT SEN/CIRCUIT P0112 0112 2×EC-180
IAT SEN/CIRCUIT P0113 0113 2×EC-180
IAT SENSOR P0127 0127 2×EC-200
INT/V TIM CONT-B1 P0011 0011 2×EC-145
INT/V TIM CONT-B2 P0021 0021 2×EC-145
I N T / V T I M V / C I R - B 1 P 1111 1111 2×EC-408
INT/V TIM V/CIR-B2 P1136 1136 2×EC-408
ISC SYSTEM P0506 0506 2×EC-392
ISC SYSTEM P0507 0507 2×EC-394
KNOCK SEN/CIRC-B1 P0327 0327 2 —EC-297
KNOCK SEN/CIRC-B1 P0328 0328 2 —EC-297
L/PRESS SOL/CIRC P0745 0745 2×AT- 1 2 7
LC/B SOLENOID FNCT P1774 1774 1×AT- 1 7 0
LC/B SOLENOID/CIRC P1772 1772 1×AT- 1 6 8
MAF SEN/CIRCUIT P0101 0101 1×EC-165
MAF SEN/CIRCUIT P0102 0102 1×EC-173
MAF SEN/CIRCUIT P0103 0103 1×EC-173
MULTI CYL MISFIRE P0300 0300 2×EC-291
NATS MALFUNCTION P1610 - P1615 1610 - 1615 2 —EC-68
NO DTC IS DETECTED.
FURTHER TESTING
MAY BE REQUIRED.No DTC
Flashing*4—
Flashing*4EC-69
NO DTC IS DETECTED.
FURTHER TESTING
MAY BE REQUIRED.P0000 0000———
P-N POS SW/CIRCUIT P1706 1706 2×EC-545
PNP SW/CIRC P0705 0705 2×AT- 11 2
PURG VOLUME CONT/V P0444 0444 2×EC-335
PURG VOLUME CONT/V P0445 0445 2×EC-335
PURG VOLUME CONT/V P1444 1444 2×EC-494
Items
(CONSULT-II screen terms)DTC*
1
TripMIL lighting
upReference page
CONSULT-II
GST*
2ECM*3
EC-18
[VQ35DE]
INDEX FOR DTC
Revision: 2004 November 2004 FX35/FX45
*1: 1st trip DTC No. is the same as DTC No.
*2: This number is prescribed by SAE J2012.
*3: In Diagnostic Test Mode II (Self-diagnostic results), this number is controlled by NISSAN.
*4: When engine is running.
*5: The troubleshooting for this DTC needs CONSULT-II.
*6: When the fail-safe operations for both self-diagnoses occur, the MIL illuminates.
*7: For models with ICC or ASCD system.
*8: For models with ICC system.PW ST P SEN/CIRC P0550 0550 2 —EC-396
SENSOR POWER/CIRC P1229 1229 1×EC-489
TCC SOLENOID/CIRC P0740 0740 2×AT-123
TCS C/U FUNCTN P1211 1211 2 —EC-470
TCS/CIRC P1212 1212 2 —EC-471
THERMSTAT FNCTN P0128 0128 2×EC-203
TP SEN 1/CIRC P0222 0222 1×EC-284
TP SEN 1/CIRC P0223 0223 1×EC-284
TP SEN 2/CIRC P0122 0122 1×EC-190
TP SEN 2/CIRC P0123 0123 1×EC-190
TP SEN/CIRC A/T P1705 1705 1×AT-136
TP SENSOR P2135 2135 1×EC-569
TURBINE REV S/CIRC P1716 1716 2×AT-143
TW CATALYST SYS-B1 P0420 0420 2×EC-316
TW CATALYST SYS-B2 P0430 0430 2×EC-316
VEH SPD SEN/CIR AT*6P0720 0720 2×AT- 11 6
VEH SPEED SEN/CIRC*6P0500 0500 2×EC-390
VENT CONTROL VALVE P0447 0447 2×EC-342
VENT CONTROL VALVE P1446 1446 2×EC-502
Items
(CONSULT-II screen terms)DTC*
1
TripMIL lighting
upReference page
CONSULT-II
GST*
2ECM*3
INDEX FOR DTC
EC-19
[VQ35DE]
C
D
E
F
G
H
I
J
K
L
MA
EC
Revision: 2004 November 2004 FX35/FX45
DTC No. IndexABS006JW
NOTE:
If DTC U1000 or U1001 is displayed with other DTC, first perform the trouble diagnosis for DTC U1000,
U1001. Refer to EC-142, "
DTC U1000, U1001 CAN COMMUNICATION LINE" .
×:Applicable —: Not applicable
DTC*
1
Items
(CONSULT-II screen terms)TripMIL lighting
upReference page
CONSULT-II
GST*
2ECM*3
No DTC
Flashing*4NO DTC IS DETECTED.
FURTHER TESTING
MAY BE REQUIRED.—
Flashing*4EC-69
U1000
1000*5CAN COMM CIRCUIT 1×EC-142
U1001
1001*5CAN COMM CIRCUIT 2 —EC-142
P0000 0000NO DTC IS DETECTED.
FURTHER TESTING
MAY BE REQUIRED.———
P0011 0011 INT/V TIM CONT-B1 2×EC-145
P0021 0021 INT/V TIM CONT-B2 2×EC-145
P0031 0031 HO2S1 HTR (B1) 2×EC-149
P0032 0032 HO2S1 HTR (B1) 2×EC-149
P0037 0037 HO2S2 HTR (B1) 2×EC-157
P0038 0038 HO2S2 HTR (B1) 2×EC-157
P0051 0051 HO2S1 HTR (B2) 2×EC-149
P0052 0052 HO2S1 HTR (B2) 2×EC-149
P0057 0057 HO2S2 HTR (B2) 2×EC-157
P0058 0058 HO2S2 HTR (B2) 2×EC-157
P0101 0101 MAF SEN/CIRCUIT 1×EC-165
P0102 0102 MAF SEN/CIRCUIT 1×EC-173
P0103 0103 MAF SEN/CIRCUIT 1×EC-173
P0112 0112 IAT SEN/CIRCUIT 2×EC-180
P0113 0113 IAT SEN/CIRCUIT 2×EC-180
P0117 0117 ECT SEN/CIRCUIT 1×EC-185
P0118 0118 ECT SEN/CIRCUIT 1×EC-185
P0122 0122 TP SEN 2/CIRC 1×EC-190
P0123 0123 TP SEN 2/CIRC 1×EC-190
P0125 0125 ECT SENSOR 1×EC-197
P0127 0127 IAT SENSOR 2×EC-200
P0128 0128 THERMSTAT FNCTN 2×EC-203
P0132 0132 HO2S1 (B1) 2×EC-205
P0133 0133 HO2S1 (B1) 2×EC-214
P0134 0134 HO2S1 (B1) 2×EC-226
P0138 0138 HO2S2 (B1) 2×EC-236
P0139 0139 HO2S2 (B1) 2×EC-245
P0152 0152 HO2S1 (B2) 2×EC-205
P0153 0153 HO2S1 (B2) 2×EC-214
P0154 0154 HO2S1 (B2) 2×EC-226
P0158 0158 HO2S2 (B2) 2×EC-236