Page 17 of 56
17
ENGLISH DEUTSCH ESPAÑOL PORTUGUÊS ITALIANOFRANÇAIS
1440
4 personne + 250 kg
1020
1080
1990
1300
500
60
801460
4 personne + 250 kg
1030
1080
2010
1300
500
60
80 1325
4 personne + 185 kg
950
960
1810
1100
500
60
80
1265
4 personne + 185 kg
950
960
1750
1000
500
60
80
Poids (kg) 1.4
16V
1.6
16V
1.9 Multijet
8V
1.9 Multijet
16V
Versions 4 places
Poids véhicule en ordre
de marche (y comprises les
provisions, la roue de secours,
les outils et les accessoires):
Portée utile à compris le conducteur (1):
Chargements maximum
admis (2)
– essieu avant
– essieu arrière:– total:
Chargements tractables (3):
– remorque freinée– remorque non freinée
Chargement maximum sur la bille (remorque freinée)
Chargement maximumsur le toit
(1) A la présence d’équipements spéciaux (dispositif de traction remorque, etc.) le poids à vide augmente et par conséquent la portée utile
diminue, par rapport aux chargements maximum admis.
(2) Chargements à ne devant pas être dépassés. C’est la responsabilité de l’Utilisateur de disposer les marchandises dans le coffres et/ou
sur le plan de chargement, en respectant les chargements maximum admis.
(3) Respecter les limites de vitesse spécifiques de chaque pays pour les véhicules avec tractage de remorque. En tout cas, la vitesse maxi
ne doit pas dépasser les 80 km/h.
Page 18 of 56
ENGLISHDEUTSCHESPAÑOLPORTUGUÊSITALIANO18FRANÇAIS
PNEUS
Pression de gonflage à froid (bar)
Pneus Tubeless à carcasse radiale. Roues de secours ayant les même caractéristique des roues en dotation.
Version Pneus Avec chargement moyen Avec chargement plein
Avant Arrière Avant Arrière
1.4
16V
- 1.6
16V
195/65 R15 91H
2,3 2,5 2,3 3,0
4 places205/55 R16 91V (*)
1.9 Multijet
8V
195/65 R15 91H 2,3 2,5 2,3 3,0
2 places/570 kg
1.9 Multijet
8V
195/65 R15 91H
2,3 2,5 2,3 3,0
4 places/550 kg205/55 R16 91V (*)
1.9 Multijet
16V
195/65 R15 91V
4 places/550 kg205/55 R16 91V (*)
2,3 2,5 2,3 3,0
215/45 R17 87W (*)
215/45 ZR17 87W (*)
Lorsque le pneu est chaud, la valeur de la pression doit être de +0,3 bar par rapport à la valeur prescrite. Contrôler en tous cas de nouveau la
valeur correcte du pneu à froid.
Avec les pneus à neige la valeur de la pression doit être de +0,2 bar par rapport à la valeur prescrite pour le pneus en dotation.
(*) (option)
Page 19 of 56
19
FRANÇAIS DEUTSCH ESPAÑOL PORTUGUÊS ITALIANOENGLISH
F0C0444m
VARIANTS AS COMPARED WITH THE OWNER HANDBOOK
This supplement contains the description of the Fiat Stilo Multi Wagon
VAN fitting out. This version is available in the 2 and 4 seats fitting out,
both versions have a partition between the passenger compartment and
the load compartment (see figures). For what concerns the parts not
contained in this supplement, please refer to The Owner Handbook to
which this supplement is an annex.
INSIDE EQUIPMENT 2 seat version (main differences as
compared with the Stilo Multi Wagon versions)
❒No rear seat and boot cover (rear parcel shelf).
❒No rear seat belts.
❒Fixed partition separating the load area from the passenger made of a
grid at the top and of sheet at the bottom.
❒Loading plan extended till the partition
❒Fixed and vision-proof glass side windows (load compartment).
❒Spare wheel having the same sizes as the wheels in the outfit.
❒Fuel tank plug provided with a lock.
4 seat version (main differences as compared with the Stilo
Multi Wagon versions)
❒Rear seat for two places only, with three point safety belts with reel.
❒Fixed tubular partition separating the load area from the passenger
compartment.
❒Spare wheel having the same sizes as the wheels in the outfit.
Driving with a raised open hatch back door is discouraged because exhaust gases
could be aspirated into the load compartment.
WARNING
F0C0445m
2 seat version
4 seat version
Page 20 of 56
FRANÇAISDEUTSCHESPAÑOLPORTUGUÊSITALIANO20ENGLISH
SAFETY BELTS
On the 4 seat version, two three point safety belts with reel are provided
on the rear places.
LOADING SUGGESTIONS
Fiat Stilo Multi Wagon VAN was designed and approved in compliance
for certain maximum weights:
❒running order weight/total weight/towable weight;
❒useful carrying capacity;
❒maximum weight on front/rear axle.
Each of these limits must be well kept in mind, and they must in no way
be exceeded.
Other simple cares can improve driving safety. running comfort and
vehicle life time:
❒uniformly distribute the load on the platform. Should it become
necessary to concentrate the load in one area only, choose the
intermediate part between the two axles;
❒remember that the lower the load position, the lower becomes the
centre of gravity, and this facilitates safe driving: hence always position
at the bottom the heavier goods;
❒remember that the vehicle dynamic behaviour is influenced by the
transported weight: in particular braking spaces become longer,
specially at a high speed.
IMPORTANT In the case of a sudden braking, or occasional impacts, an
unexpected load movement could create hazardous situations for the
driver and the passenger: therefore before starting the journey, solidly
bind the load, using the special 6 hooks (see figure); for blocking use
cables, ropes or belts that are properly strong to suit the material to be
fixed.
F0C0441m
Page 21 of 56
21
FRANÇAIS DEUTSCH ESPAÑOL PORTUGUÊS ITALIANOENGLISH
TOOLS AND SPARE WHEEL
Tools are located inside the boot under the mat. To take out tools,
loosen the ring nut and remove the cover (A). Use band (B) to lift the
carpet.
Tools are the following:
(A): jack;
(B): screwdriver;
(C): socket wrench for loosening wheel fastening bolts;
(D): jack handle;
(E): extension for removing wheel fastening bolts;
(F): wheel refitting pin (versions with alloy rims);
(G): tow hitch;
(H): socket wrench;
(L): jack ratchet wrench;
(M): wheel chock (to lock wheels);
(N): tool bag.
Tools (A), (C), (H), (L) are contained in the tool bag (N) located behind
the driver's seat (for 2-seat versions) or inside the boot (for 4-seat
versions).
All tools are contained in the tool bag provided for the purpose inside
the boot.
Chock (M) instead is contained in the bag together with the touch-up
paint.
To replace wheels refer to the descriptions and figures in the Owner
Handbook to which this supplement is an annex.
F0C0442mF0C0443mF0C0480m
Page 22 of 56
FRANÇAISDEUTSCHESPAÑOLPORTUGUÊSITALIANO22ENGLISH
Version Engine type code Body code1.4
16V
843A1000 192DXH1B AX (*)
1.6
16V
182B6000 192DXB1A CX (*)
1.9 Multijet
8V
192A8000192DXS1A AX
192DXS1A BX (*)
1.9 Multijet
16V
937A5000 192DXT1B AX (*)
(*) 4 seats version
ENGINE CODES – BODY VERSIONS
PERFORMANCE
1.4
16V
1.6
16V
1.9 Multijet
8V
1.9 Multijet
16V
Top speed at full load km/h 178 183 193 207
Page 23 of 56
23
FRANÇAIS DEUTSCH ESPAÑOL PORTUGUÊS ITALIANOENGLISH
DIMENSIONS
4516
1756
1570
893
1023
2600
1514
1508
2 seats 4 seats
16821073
14421442
1132–
945 945
537 537
1600 510
4516
1756
1570
893
1023
2600
1514
1508
4 seats
1073
1442
–
945
537
510 4516
1756
1570
893
1023
2600
1514
1508
4 seats
1073
1442
–
945
537
510
1.4
16V
-1.6
16V
1.9 Multijet
8V
1.9 Multijet
16V
LengthWidth mm mmHeight with empty mass mm
Overhang
Front mm
Rear mm
Pitch mm
Wheel base
Front mm
Rear mm
Load compartmentLength mmMaximum width mm
Width between wheelhouses mmHeight at the centre mm
Height of loading plan from the ground mm
Volume del load compartment: dm
3
Page 24 of 56
FRANÇAISDEUTSCHESPAÑOLPORTUGUÊSITALIANO24ENGLISH
Weights (kg) 1.9 Multijet
8V
2 seats versions
Vehicle weight in running order
(including supplies. spare wheel, tools and fittings):Useful carrying capacity included driver (1):
Admissible top loads (2)
– front axle:
– rear axle:– total:
Towable loads:
– braked trailer– not braked trailer
Top load on ball(braked trailer)Top load on roof
(1) In the presence of special equipment (trailer towing device, etc.) empty vehicle weight increases, and useful carrying capacity hence
diminishes, in compliance with top admissible loads.
(2) Loads not to be exceeded. It is the User’s responsibility to layout the goods in the luggage compartment and/or on the loading plan in
compliance with maximum admissible loads.1405
570
1020
1080
1975
1300
500
80
60WEIGHTS
