2004 FIAT STILO spare wheel

19
FRANÇAIS DEUTSCH ESPAÑOL PORTUGUÊS ITALIANOENGLISH
F0C0444m
VARIANTS AS COMPARED WITH THE OWNER HANDBOOK
This supplement contains the description of the Fiat Stilo Multi Wagon
VAN fitting out. This version is available in the 2 and 4 seats fitting out,
both versions have a partition between the passenger compartment and
the load compartment (see figures). For what concerns the parts not
contained in this supplement, please refer to The Owner Handbook to
which this supplement is an annex.
INSIDE EQUIPMENT 2 seat version (main differences as
compared with the Stilo Multi Wagon versions)
❒No rear seat and boot cover (rear parcel shelf).
❒No rear seat belts.
❒Fixed partition separating the load area from the passenger made of a
grid at the top and of sheet at the bottom.
❒Loading plan extended till the partition
❒Fixed and vision-proof glass side windows (load compartment).
❒Spare wheel having the same sizes as the wheels in the outfit.
❒Fuel tank plug provided with a lock.
4 seat version (main differences as compared with the Stilo
Multi Wagon versions)
❒Rear seat for two places only, with three point safety belts with reel.
❒Fixed tubular partition separating the load area from the passenger
compartment.
❒Spare wheel having the same sizes as the wheels in the outfit.
Driving with a raised open hatch back door is discouraged because exhaust gases
could be aspirated into the load compartment.
WARNING
F0C0445m
2 seat version
4 seat version

21
FRANÇAIS DEUTSCH ESPAÑOL PORTUGUÊS ITALIANOENGLISH
TOOLS AND SPARE WHEEL
Tools are located inside the boot under the mat. To take out tools,
loosen the ring nut and remove the cover (A). Use band (B) to lift the
carpet.
Tools are the following:
(A): jack;
(B): screwdriver;
(C): socket wrench for loosening wheel fastening bolts;
(D): jack handle;
(E): extension for removing wheel fastening bolts;
(F): wheel refitting pin (versions with alloy rims);
(G): tow hitch;
(H): socket wrench;
(L): jack ratchet wrench;
(M): wheel chock (to lock wheels);
(N): tool bag.
Tools (A), (C), (H), (L) are contained in the tool bag (N) located behind
the driver's seat (for 2-seat versions) or inside the boot (for 4-seat
versions).
All tools are contained in the tool bag provided for the purpose inside
the boot.
Chock (M) instead is contained in the bag together with the touch-up
paint.
To replace wheels refer to the descriptions and figures in the Owner
Handbook to which this supplement is an annex.
F0C0442mF0C0443mF0C0480m

FRANÇAISDEUTSCHESPAÑOLPORTUGUÊSITALIANO24ENGLISH
Weights (kg) 1.9 Multijet
8V
2 seats versions
Vehicle weight in running order
(including supplies. spare wheel, tools and fittings):Useful carrying capacity included driver (1):
Admissible top loads (2)
– front axle:
– rear axle:– total:
Towable loads:
– braked trailer– not braked trailer
Top load on ball(braked trailer)Top load on roof
(1) In the presence of special equipment (trailer towing device, etc.) empty vehicle weight increases, and useful carrying capacity hence
diminishes, in compliance with top admissible loads.
(2) Loads not to be exceeded. It is the User’s responsibility to layout the goods in the luggage compartment and/or on the loading plan in
compliance with maximum admissible loads.1405
570
1020
1080
1975
1300
500
80
60WEIGHTS

FRANÇAISDEUTSCHESPAÑOLPORTUGUÊSITALIANO26ENGLISH
TYRES
Cold inflating pressure (bar)
Radial carcass Tubeless tyres. Spare wheel having the same features as the outfit wheels.
Version Tyre At medium load At full load
Front Rear Front Rear
1.4
16V
- 1.6
16V
195/65 R15 91H
2.3 2.5 2.3 3.0
4 places205/55 R16 91V (*)
1.9 Multijet
8V
195/65 R15 91H 2.3 2.5 2.3 3.0
2 places/570 kg
1.9 Multijet
8V
195/65 R15 91H
2.3 2.5 2.3 3.0
4 places/550 kg205/55 R16 91V (*)
1.9 Multijet
16V
195/65 R15 91V
4 places/550 kg205/55 R16 91V (*)
2.3 2.5 2.3 3.0
215/45 R17 87W (*)
215/45 ZR17 87W (*)
When the tyre is hot, pressure value must be +0.3 bar as compared with the prescribed value. Check anyhow the correct value when the tyre
is cold.
For snow tyres pressure value must be +0.2 bar as compared with the pressure value prescribed for the outfit tyres.
(*) (optional)