2004 DODGE INTREPID Owners Manual

Page 73 of 249

DODGE INTREPID 2004 2.G Owners Manual NOTE:Some entry gates and garage door openers may
require you to replace step 4 with the procedures listed
under Canadian Programming.
5. The indicator light in the Universal Transceiver will
begin to

Page 74 of 249

DODGE INTREPID 2004 2.G Owners Manual 1. Locate the training button on the garage door motor
head unit. The exact location and color of the button may
vary by garage door opener manufacturer.If you have
difficulty in locating the training

Page 75 of 249

DODGE INTREPID 2004 2.G Owners Manual Reprogramming A Single Button
1. Press and hold the Universal Transceiver button to be
reprogrammed. Do not release until step 4 has been
completed.
2. When the indicator light begins to flash slowly

Page 76 of 249

DODGE INTREPID 2004 2.G Owners Manual POWER SUN ROOF — IF EQUIPPED
The sun roof controls are located on the overhead con-
sole.
To Open the sunroof from the Closed position, press and
release the OPEN button. The sunroof will open fully

Page 77 of 249

DODGE INTREPID 2004 2.G Owners Manual Wind Buffeting
Wind buffeting can be described as the perception of
pressure on the ears or a helicopter type sound in the
ears. Your vehicle may exhibit wind buffeting with the
windows down, or the s

Page 78 of 249

DODGE INTREPID 2004 2.G Owners Manual US/M Button
Use this button to change the display from U.S. to metric
measurement units.
RESET Button
Use this button to reset the following displays to zero:
Average Fuel Economy
Trip Odometer
Elapse

Page 79 of 249

DODGE INTREPID 2004 2.G Owners Manual Compass/Temperature Display
This display provides the outside temperature and one of
eight compass readings to indicate the direction the
vehicle is facing.
Automatic Compass Calibration
The self cali

Page 80 of 249

DODGE INTREPID 2004 2.G Owners Manual Variance is the difference between magnetic North and
geographic North. For proper compass function, the
correct variance zone must be set. Refer to the variance
map for the correct variance zone. To