Page 408 of 933

AIR CONDITIONING
62
62 - 1
GENERALITIES
GENERALITIES
The purpose of the a ir conditioning unit i s to produce a decrease of t he temperature in the
passengers compartment a nd to obtain a l ower value t emperature compared to the external
environment one, reducing in the same time the air moisture.
MAINTENANCE
For a vehicle equipped with air conditioning, it is recommended a frequent checking of the
refrigerating agent level. During the year it is recommended:
- the checking of the refrigerant fluid filling;
- the cleaning and the air-blowing of the condenser and the cooling radiator fins;
- the checking of the condensation removal pipe on order not to be clogged.
For important leakage repair, for any components replacement (compressor, condenser, etc)
and if moisture was noticed in t he air conditioning circuit, the dryer filter tank is to be replaced
and the unit draining is to be performed. The same is valid also in case the conditioning circuit
remains open without protection covers more than 10 minutes.
IMP ORTANT
Duri ng winter, it is recommended the frequent start of the system, in order to pro-
long the lifetime of the compressor and of the whole system.
The vehicle equipped with an air conditioning system shall be not exposed for more
than 20 minutes i n painting c abin where there are temperatures higher than 80 °C.
It is obligatory the use of the refrigerating agent and compressor oil type prescribed
by the manufacturer. It is absolutely forbidden to perform welding on the elements of the air condition
circ uits. The filling of the air conditioning system can be pe rformed only by m eans of charging
units and observing the instructions of the manufacturer. For mechanical or body
operations it is recommended pi ping protection in order to avoid their disconnection
by accident. Avoid the drip of the oil compressor on the painted vehicle body.
For component replacement implying the circuit draining, it is absolutely necessary
the use of new parts and of a special oil for compressor.
vnx.su
Page 414 of 933

AIR CONDITIONING
62
62 - 7
The compressor is absorbing the vapors coming from the evaporator at low pressure and
temperature, is compressing them and convey the gas at high temperature and pressure. The refrigerant fluid in high pressure and temperature vapor condition is entering in the second
he at exchanger, which by condensation is transmitting the heat to the external environmental.
At the exit from the condenser, the refrigerant fl uid is in liquid condition, at a high pressure and temperature.
Type of compressor: SD 7Y15
Compressor oil : PAG SP 10 or SP20, volume –135 cmc.
Refrigerant: HFC 134 a, quantity of refrigerant : 0.590 kg
C OMPRESSOR REPLACEMENT
DISMOUNTING
Disconnect the battery.
Drain the refrigerant circuit.
Disconnect the compressor’s connection.
Disconnect the pipes from the compressor.
Dismount the belt tensioning screw and release the belt.
Dismount the compressor attachment screws.
Dismount the compressor.
Replace the compressor.
REMOUNTING
Perform in the reverse order the dismounting operations.
T ension the belt and tighten at the required moment the tightening attachment screw.
Fill the refrigerant circuit and check the good operation of the climate control system.
COMPRESSOR
vnx.su
Page 574 of 933
89A
ELECTRICAL DIAGRAMS
89A - 22
The fuse box placed in the engine compartment is attached in front of the left shock absorber
column and contains relays and fusible protecting the following electric circuits:
A.
for equipping E1, E2
( until 01.06.2001)
RELAY
RELAY TYPE
CONTROLLED
CIRCUIT
A
15A
Fog
headlamps
D
30A
Injector s, canister purging valve,
oxygen sensor heating
resistance, injection computer.
H
30A
F uel pump
Ignition coil
C
30A
C ooling blower
(vehicle without
AC)
FUSE
NUMB ER
F01
F02
F03
F04
F17 FUSE
TYPE
30A
25A
7,5A 5A
15A PROTECTED C IRCUIT
In jectors, oxygen sensor resistance heating, canister
purging valve, injection computer, fuel pump, ignition coil.
Cooling blower ( vehicles without AC)
Injection computer ( + DC)
In jection computer( (+IC)
Fog headlights
FUSE BOX FROM ENGINE COMPARTMENT
vnx.su
Page 575 of 933
89A
ELECTRICAL DIAGRAMS
89A - 23
The fuse box placed in the engine compartment is attached in front of the left shock absorber
column and contains relays and fusible protecting the following electric circuits:
FUSE
NUMB ER
F01
F02
F03
F04
F17
F06 FUSE
TYPE
30A
40A
7,5A 5A
15A
7,5A PROTECTED C IRCUIT
In jectors, oxygen sensor resistance heating, canister
purging valve, injection computer, fuel pump, ignition coil.
Cooling blower ( vehicles with AC)
Injection computer ( + DC)
In jection computer( (+IC)
Fog headlights
AC compressor
RELAY
RELAY TYPE
CONT ROL LED
CIRCUIT
A
15A
Fog
headlamps
B
40A
C ooling
blower- 1/st
speed(vehicles
with AC)
D
30A
Injector s, canister purging
valve, oxygen sensor
heating resistance,
injection computer.
E
30A
AC
compressor
H
30A
Fuel
pump
Ignition
coil
B. For equipping E2(0), E3 ( until 01.06.2001)
C
30A
C ooling
blower- 2/
nd speed
(vehicle
with AC)
FUSE BOX FROM ENGINE COMPARTMENT
vnx.su
Page 668 of 933
89B
ELECTRIC DIAGRAMS
89B - 12
The fuse box placed in the engine compartment is attached in front of the left shock absorber
column and contains relays and fusible protecting the following electric circuits:
A.
for equipping E0, E1, E2
( after 01.06.2001)
RELAY
RELAY TYPE
CONT ROL LE D
CIRCUIT
A
15A
Fog
headlamps
D
30A
Injector s, canister purging valve,
oxygen sensor heating
resistance, injection computer.
H
30A
F uel pump
Ignition coil
C
30A
C ooling blower
(vehicle without
AC)
FUSE
NUMB ER
F01
F02
F03
F04
F17 FUSE
TYPE
30A
25A
7,5A 5A
15A PROTECTED C IRCUIT
In jectors, oxygen sensor resistance heating, canister
purging valve, injection computer, fuel pump, ignition coil.
Cooling blower ( vehicles without AC)
Injection computer ( + DC)
In jection computer( (+IC)
Fog headlights
FUSE BOX FROM ENGINE COMPARTMENT
vnx.su
Page 669 of 933
89B
ELECTRIC DIAGRAMS
89B - 13
The fuse box placed in the engine compartment is attached in front of the left shock absorber
column and contains relays and fusible protecting the following electric circuits:
FUSE
NUMB ER
F01
F02
F03
F04
F17
F06 FUSE
TYPE
30A
40A
7,5A 5A
15A
7,5A PROTECTED C IRCUIT
In jectors, oxygen sensor resistance heating, canister
purging valve, injection computer, fuel pump, ignition coil.
Cooling blower ( vehicles with AC)
Injection computer ( + DC)
In jection computer( (+IC)
Fog headlights
AC compressor
RELAY
RELAY TYPE
CONT ROL LED
CIRCUIT
A
15A
Fog
headlamps
B
40A
C ooling
blower- 1/st
speed(vehicles
with AC)
D
30A
Injector s, canister purging
valve, oxygen sensor
heating resistance,
injection computer.
E
30A
AC
compressor
H
30A
Fuel
pump
Ignition
coil
B. For equipping E2(0), E3 ( after 01.06.2001)
C
30A
C ooling
blower- 2/
nd speed
(vehicle
with AC)
FUSE BOX FROM ENGINE COMPARTMENT
vnx.su
Page 760 of 933
89C
ELECTRIC DIAGRAMS
89C - 12
The fuse box placed in the engine compartment is attached in front of the left shock absorber
column and contains relays and fusible protecting the following electric circuits:
A.
for equipping E0, E1, E2
( EURO 2000)
RELAY
RELAY TYPE
CONT ROL LE D
CIRCUIT
A
15A
Fog
headlamps
D
30A
Injector s, canister purging valve,
oxygen sensor heating
resistance, injection computer.
H
30A
F uel pump
Ignition coil
C
30A
C ooling blower
(vehicle without
AC)
FUSE
NUMB ER
F01
F02
F03
F04
F17 FUSE
TYPE
30A
25A
7,5A 5A
15A PROTECTED C IRCUIT
In jectors, oxygen sensor resistance heating, canister
purging valve, injection computer, fuel pump, ignition coil.
Cooling blower ( vehicles without AC)
Injection computer ( + DC)
In jection computer( (+IC)
Fog headlights
FUSE BOX FROM ENGINE COMPARTMENT
vnx.su
Page 761 of 933
89C
ELECTRIC DIAGRAMS
89C - 13
The fuse box placed in the engine compartment is attached in front of the left shock absorber
column and contains relays and fusible protecting the following electric circuits:
FUSE
NUMB ER
F01
F02
F03
F04
F17
F06 FUSE
TYPE
30A
40A
7,5A 5A
15A
7,5A PROTECTED C IRCUIT
In jectors, oxygen sensor resistance heating, canister
purging valve, injection computer, fuel pump, ignition coil.
Cooling blower ( vehicles with AC)
Injection computer ( + DC)
In jection computer( (+IC)
Fog headlights
AC compressor
RELAY
RELAY TYPE
CONT ROL LED
CIRCUIT
A
15A
Fog
headlamps
B
40A
C ooling
blower- 1/st
speed(vehicles
with AC)
D
30A
Injector s, canister purging
valve, oxygen sensor
heating resistance,
injection computer.
E
30A
AC
compressor
H
30A
Fuel
pump
Ignition
coil
B. For equipping E2(0), E3 ( EURO 2000)
C
30A
C ooling
blower- 2/
nd speed
(vehicle
with AC)
COCKPIT FUSE BOX
vnx.su