BATTERY - FRONT HEADLIGHTS
80
80 - 10
FOG P ROJECTORS ADJUSTMENT
The fog projectors adjustment is to be performed in the following conditions:
- the vehicle to be placed on a horizontal surface;
- the vehicle has not passengers inside the cockpit or weights in the trunk;
- the tires a re pressurized a t the manufacturer prescribed pressure.
Further on, proceed as follows:
Bring the vehicle at the working place.
Position the adjustment device (headlamp adjustment device –E) in front of an optical center
of a fog lamp. Switch on the fog projectors. Rotate the adjustment screw of the fog lamp (D), by means of
a scre wdriver ( A), so that a n adjustment of 2 % i s obtained and t he separation between t he
lighted area and the dark one from the adjustment device is l ocated under the marked line (G)
This adjustment is to be performed in the same way as for the meeting lights adjustment.
Bring the adjustment device in front of the optical center of the second fog lamp;
Perform the fog projector adjustment;
Switch off the fog projectors.
H eadlamps adjustment
G
E
A
vnx.su
81
INSIDE AND REAR LIGHTING
81 - 1
REAR LAMPS
RE AR LAMP REPLACEMENT
DISMOUNTIN G
Disconnect the battery (-) plug.
Disconnect the rear lamp connector .
Inside trunk, dismount the screw with triangle head ( A).
Extract the rear lamp towards outside.
R EMOU NT I NG
Perform the dismounting operations in the reverse order, positioning correctly the rear lamp in
its seat. Check the bulbs connections and operation.
Rear right lamp Rear left lamp
Rear right lamp connector Rear left lamp connector
Pin Denomination Pin Denomination
1+ Right stop lamp 1 Fog parking lamp supply
2+ Right parking lamp 2 Left turning lamp supply
3Free 3 Free
4 Mass 4 Mass
5 Right turning lamp supply 5 + Left stop lamp
6 Revere driving lamp supply 6 + Left parking lamp
Inside and rear lighting
A
6
1 B
B
B
B 6
1
vnx.su
