87
ELECTRICAL ASSISANCE EQUIPEMENT
87 - 1
It is located on the left side of the climate
control box, being attached by means of a
screw. It has the windscreen washing electric
pump attached on the washer reservoir.
In the drawin g, the following elements may
be identified:
1,2 Pins of the electric pump.
3 Windscreen washing reservoir
4 Electric pump
5 Attachment screw
6W ashing hose
7 Adjustable nozzle
8W ashing reservoir cap
9W ashing bushing
DISMOUNTIN G
Disconnect the battery (-) terminal.
Dismount the climate control gasket.
Dismount the climate control protector.
Di smount the attachment scre w of the
washing reservoir. Carefully remove the front wiring branch
(in order not to damage the splice), from its
location in the wall between the engine
compartment and the climate control box.
Extract the washing reservoir from the
washing b ushing (9). Di
sconnect t he washing hose connected to
the electric pump. Carefully remove the washing reservoir from
the climate control compartmen t and tilt it in such
way that windscreen washing fluid is not flowing
out.
R EMOU NT I NG
Perform the dismounting operations in t he
reverse order.
Check the opera tion of the assembly and
eventually adjust by means of a “needle” the
nozzle in order to correctly wash the windscreen.
AT T E N T I ON!
Do n o t clo se front bonnet after
dismounti ng the w ind scr een w a sh ing
assembly, because it may be possible the
front wiring damaging.
REMARK:
The washing fluid level must be between
the minim and maxim levels marks on the
washing reservoir (0.8 l). The required t ightening m oment of the
attachment screw of the windscreen washing
assembly: 2 Nm.
Connector
Pin Denomination
1 Windscreen washing pump control
2 Mass
Windscreen washing
vnx.su