2003 TOYOTA AVENSIS OIL PUMP

03±20
±
SERVICE SPECIFICATIONS ENGINE MECHANICAL
AVENSIS REPAIR MANUAL (RM1018E) Part Tightened
ft
lbf
kgf
cm
N
m
Injection pipe, Fuel inlet pipe x Common rail
Used pipe using SST
Used pipe not using SST New pipe using SST
New pipe not using SST
42
46
31
34428
469
316
34731
34
23
25
Injection pipe x Injector Used pipe using SST
Used pipe not using SST New pipe using SST
New pipe not using SST
42
46
31
34428
469
316
34731
34
23
25
Injection pipe clamp x Intake manifold5.05144 in.
lbf
Fuel inlet pipe x Common rail
Used pipe using SST
Used pipe not using SST New pipe using SST
New pipe not using SST
42
46
31
34428
469
316
34731
34
23
25
Fuel inlet pipe x injection pump Used pipe using SST
Used pipe not using SST New pipe using SST
New pipe not using SST
42
46
31
34428
469
316
34731
34
23
25
Nozzle leakage pipe No.2 x Cylinder head Check valve
Bolt21
8.8214 9015
78 in.
lbf
Vacuum pump x Cylinder head2121415
EGR valve assy x Cylinder head1818413
Intake air connector with diesel throttle body x Intake manifold2121415
Water inlet x Cylinder block8.89078 in.
lbf
Water outlet sub±assy x Cylinder head2121415
Exhaust manifold x Cylinder head4747935
EGR pipe sub±assy x Cylinder head Bolt
Nut37
25375
25027
18
Oil filter bracket x Oil pan sub±assy3434725
V±ribbed belt tensioner assy x Oil pump3131623
Generator bracket No.1 x Cylinder block3737727
Idler pulley Sub±assy x V±ribbed belt tensioner assy4040830
Engine mounting bracket RR x Engine mounting insulator RR6465347
Engine mounting bracket FR x Engine mounting insulator FR6465347
Drive shaft bearing bracket x Cylinder block6465347
Rear end plate x Cylinder block8.48674 in.
lbf
Flywheel x Crankshaft7172052
Engine mounting member sub±assy center x Body4545933
Front suspension crossmember sub±assy x Rear engine mounting bracket8788764
Front suspension crossmember sub±assy x Front engine mounting bracket\
5253038
Front suspension crossmember sub±assy x Body1331,35698
Front suspension member brace x Front suspension crossmember sub±assy\
1331,35698
Front suspension member brace x Body8081659
Return tube sub±assy x Body8.08271 in.
lbf
Engine mounting insulator RH x Body5253038
Engine mounting bracket LH x Engine mounting insulator LH8081659
Injector driver x Engine mounting insulator RH5.05144 in.
lbf
Engine wire x Body8.48574 in.
lbf
Air tube No.2 x Manual transaxle2525518
Relay box x Radiator assy5.35446 in.
lbf
Fuel filter assy x Fuel filter support1817813
http://vnx.su

±
SERVICE SPECIFICATIONS ENGINE MECHANICAL
03±21
AVENSIS REPAIR MANUAL (RM1018E)Part Tightened
ft
lbf
kgf
cm
N
m
Air cleaner assy x Body x Engine mounting bracket LH7.07162 in.
lbf
Engine cover No.1 x Cylinder head cover sub±assy8.08271 in.
lbf
Engine cover No. 1 x Intake manifold8.08271 in.
lbf
Timing belt tensioner x Cylinder block2121415
Timing chain cover plate x Cylinder block9.09280 in.
lbf
Transverse engine engine mounting bracket x
Cylinder block For 14 mm head bolt
For 17 mm head bolt
37
64375
65027
47
Timing belt No. 1 cover x Transverse engine engine mounting bracket7.47565 in.
lbf
Timing belt No. 1 cover x Oil pump assy7.47565 in.
lbf
Timing belt No. 2 cover x Transverse engine engine mounting bracket7.47565 in.
lbf
Timing belt No. 2 cover x Cylinder head cover sub±assy7.47565 in.
lbf
Timing belt No. 2 cover x Camshaft oil seal retainer7.47565 in.
lbf
Timing belt No. 2 cover x Timing belt cover No. 37.47565 in.
lbf
Crankshaft pulley x Crankshaft1801,835133
Engine mounting bracket No.2 RH x Transverse engine
engine mounting bracket5253038
Camshaft bearing cap x Cylinder head2020415
Camshaft oil seal retainer x Cylinder head8.89078 in.
lbf
Camshaft timing pulley x Camshaft8889965
Cylinder head cover x Cylinder head131359.7
Vacuum reservoir sub±assy x Cowl top panel outer8.38573 in.
lbf
Cylinder head x Cylinder block4545933
Drain plug (oil pan)3435025
http://vnx.su

031FR±02
03±12
±
SERVICE SPECIFICATIONS INTAKE
AVENSIS REPAIR MANUAL (RM1018E)
TORQUE SPECIFICATION
1CD±FTV:
Part TightenedN
mkgf
cmft
lbf
Turbo water pipe sub±assy No.1 x Turbocharger sub±assy131359.7
Turbocharger sub±assy x Exhaust manifold5354039
Turbo oil outlet pipe x Turbocharger sub±assy131359.7
Manifold converter sub±assy x Turbocharger sub±assy 1st
2nd8.0
2582
25571 in.
lbf
18
Manifold stay x Manifold converter sub±assy 1st
2nd8.0
6182
62271 in.
lbf
45
Manifold stay x Cylinder block sub±assy 1st
2nd8.0
6182
62271 in.
lbf
45
Turbohcharger stay x Turbocharger sub±assy 1st
2nd8.0
5682
57171 in.
lbf
41
Turbocharger stay x Cylinder head sub±assy 1st
2nd8.0
5682
57171 in.
lbf
41
Manifold stay No. 2 x Manifold converter sub±assy 1st
2nd8.0
5682
57171 in.
lbf
41
Manifold stay No. 2 x Cylinder head sub±assy 1st
2nd8.0
5682
57171 in.
lbf
41
Exhaust manifold heat insulator No. 2 x Turbocharger sub±assy121228.9
Turbo insulator No. 1 x Manifold converter sub±assy2020415
Turbo insulator No. 1 x Turbocharger sub±assy2020415
Turbo insulator No. 2 x Manifold converter sub±assy2020415
Exhaust pipe assy x Heater bracket sub±assy w/ Cold area7.57666 in.
lbf
Exhaust pipe assy x Body w/ Cold area7.57666 in.
lbf
Heater bracket x Body w/ Cold area7.57666 in.
lbf
Heater pump assy x Heater bracket w/ Cold area7.57666 in.
lbf
Air tube No. 1 x Air tube No. 22525518
Air tube No. 1 x Intake air connector2525518
Air tube No. 1 x Cylinder head cover2525518
Air tube No. 1 x Engine mounting bracket FR2525518
Air cleaner case x Body7.07162 in.
lbf
Intercooler assy x Body7.07162 in.
lbf
Intercooler cooling air duct x Intercooler assy5.05144 in.
lbf
Air cleaner case x Engine mounting insulator LH7.07162 in.
lbf
Engine cover No. 1 x Cylinder head cover sub±assy8.08271 in.
lbf
Engine cover No. 1 x Intake manifold8.08271 in.
lbf
Vacuum reservoir sub±assy x Cowl top panel outer8.38573 in.
lbf
http://vnx.su

031H6±01
03±28
±
SERVICE SPECIFICATIONS LUBRICATION
AVENSIS REPAIR MANUAL (RM1018E)
TORQUE SPECIFICATION
1ZZ±FE/3ZZ±FE:
Part TightenedN
mkgf
cmft
lbf
Oil pressure switch x Cylinder head1515311
Oil pan drain plug x Oil pan3737727
Oil pump x Cylinder block9.09280 in.
lbf
1AZ±FE:
Part TightenedN
mkgf
cmft
lbf
Oil pressure switch x Cylinder head1515311
Oil pan drain plug x Oil pan2525018
Oil pump x Cylinder block1919515
Timing chain guide x Cylinder block9.09280 in.
lbf
Chain vibration damper No.1 x Cylinder block9.09280 in.
lbf
Oil pan sub±assy x Cylinder block9.09280 in.
lbf
Transverse engine engine mounting insulator x Cylinder block5253038
Engine service cover bracket RH x Body w/o Air conditioning
RHD (w/ Air conditioning) steering position type9.0
9.092
9280 in.
lbf
80 in.
lbf
Cooler bracket RH x Body LHD (w/ Air conditioning) steering position type9.09280 in.
lbf
Engine x wire7.07162 in.
lbf
Oil reservoir bracket No. 1 x Body8.08271 in.
lbf
Cooler refrigerant suction hose No. 1 x cooler bracket No, 1
LHD (w/ Air conditioning) steering position type9.09280 in.
lbf
Return tube x Body8.08271 in.
lbf
Ignition coil assy x Cylinder head cover9.09280 in.
lbf
Vane pump x Cylinder block3737727
Engine cover sub±assy x Cylinder block7.07162 in.
lbf
Front wheel RH1031,05076
1AZ±FSE:
Part TightenedN
mkgf
cmft
lbf
Oil pressure switch x Cylinder head1515311
Oil pan drain plug x Oil pan2525018
Oil pump x Cylinder block1919515
Timing chain guide x Cylinder block9.09280 in.
lbf
Chain vibration damper No.1 x Cylinder block9.09280 in.
lbf
Oil pan sub±assy x Cylinder block9.09280 in.
lbf
Transverse engine engine mounting insulator x Cylinder block5253038
Engine service cover bracket RH x Body RHD steering position type9.09280 in.
lbf
Cooler bracket RH x Body LHD steering position type9.09280 in.
lbf
Engine x wire7.07162 in.
lbf
Oil reservoir bracket No. 1 x Body8.08271 in.
lbf
Cooler refrigerant suction hose No. 1 x cooler bracket No, 1
LHD steering position type9.09280 in.
lbf
Return tube x Body8.08271 in.
lbf
Ignition coil assy x Cylinder head cover9.09280 in.
lbf
Vane pump x Cylinder block3737727
Engine cover sub±assy x Cylinder block7.07162 in.
lbf
Front wheel RH1031,05076
1CD±FTV:
Part TightenedN
mkgf
cmft
lbf
Oil drain plug x Oil pan sub±assy No. 23435025
Oil pump x Cylinder block3132023
http://vnx.su

±
SERVICE SPECIFICATIONS LUBRICATION
03±29
AVENSIS REPAIR MANUAL (RM1018E)Part Tightened
ft
lbf
kgf
cm
N
m
Crankshaft position sensor x Oil pump assy8.89078 in.
lbf
Oil pan sub±assy x Cylinder block Bolt A
Bolt B
Bolt C
Bolt D42
21 11
12428
214 11 2
12231
15 8
9
Oil pan insulator x Oil pan sub±assy7.57666 in.
lbf
Oil strainer sub±assy x Oil pan sub±assy Bolt
Nut21
13209
13515
10
Oil pan Sub±assy No.2 x Oil pan sub±assy1211 99
Engine oil level sensor x Oil pan sub±assy No.27.07162 in.
lbf
Oil level gage guide x Cylinder block1818413
V±ribbed belt tensioner assy x Oil pump assy3132023
Timing belt idler sub±assy No. 1 x Cylinder head3535726
Timing belt idler sub±assy No. 2 x Oil pump assy4747935
Engine mounting insulator sub±assy RH x Transverse engine engine mount-
ing bracket5253038
Engine mounting insulator sub±assy RH x Body5253038
Engine cover No. 1 x Cylinder head cover sub±assy8.08271 in.
lbf
Engine cover No. 1 x Intake manifold8.08271 in.
lbf
Front wheel RH1031,05076
Oil cooler assy x Cylinder block4545433
http://vnx.su

030G6±04
±
SERVICE SPECIFICATIONS POWER STEERING
03±59
AVENSIS REPAIR MANUAL (RM1018E)
POWER STEERING
SERVICE DATA
POWER STEERING FLUID
Fluid level rise Maximum5 mm (0.20 in.)
Fluid pressure at idle speed with valve closedAZ Series:
1CD±FTV:8,300 to 9,000 kPa (85 to 92 kgf/cm2, 1,204 to 1,305 psi)
8,800 to 9,500 kPa (90 to 97 kgf/cm2, 1,276 to 1,378 psi)
STEERING WHEEL
Steering effort at idle speed (Reference)5.5 N´m (56 kgf´cm, 49 in.´lbf)
VANE PUMP ASSY
Vane pump rotating torque0.27 N´m (2.8 kgf´cm, 2.4 in.´lbf) or less
Vane pump shaft and vane pump housing oil clearance Maximum0.07 mm (0.0028 in.)
Vane plate thickness Minimum1.405 to 1.411 mm (0.05531 to 0.05555 in.)
Clearance between the rotor groove and plateMaximum0.03 mm (0.0012 in.)
Spring free length Minimum36.9 mm (1.453 in.)
STEERING GEAR ASSY
Total preload (Tie rod rotating torque) (Turning)0.29 to 1.96 N´m (3 to 20 kgf´cm, 2.57 to 17.35 in.´lbf)
Total preload (Control valve rotating torque)(Turning)0.6 to 1.1 N´m (6 to 11 kgf´cm, 5.3 to 9.7 in.´lbf)
RACK & PINION POWER STEERING GEAR ASSY
Total preload (Tie rod rotating torque) (Turning)0.49 to 3.43 N´m (5 to 35 kgf´cm, 4.34 to 30.38 in.´lbf)
http://vnx.su

030G7±04
03±60
±
SERVICE SPECIFICATIONS POWER STEERING
AVENSIS REPAIR MANUAL (RM1018E)
TORQUE SPECIFICATION
Part tightenedN
mkgf
cmft
lbf
VANE PUMP ASSY (AZ Series)
Vane pump housing sub±assy rear x Vane pump housing sub±assy front2222416
Power steering oil pressure switch2121415
Pressure port union sub±assy6970451
Power steering suction port union set bolt121229
Vane pump assy x Pump bracket rear4444932
Vane pump assy set bolt26 (37)264 (377)19 (27)
Pressure feed tube assy x Vane pump assy5252538
Pressure feed tube assy clamp set bolt8.08271 in.
lbf
VANE PUMP ASSY (1CD±FTV)
Vane pump housing sub±assy rear x Vane pump housing sub±assy front2222416
Pressure port union sub±assy6970451
Power steering suction port union set bolt121229
Vane pump assy set bolt Bolt A:
Bolt B:72
39734
39853
29
Pressure feed tube assy x Vane pump assy41 (44.1)414 (450)30 (33)
Pressure feed tube assy clamp set bolt8.08271 in.
lbf
STEERING GEAR ASSY
Engine hanger set bolt3838728
Steering rack x Steering rack end sub±assy60 (83.5)616 (851)45 (62)
Tie rod end sub±assy lock nut7475054
Steering gear assy set bolt4950036
Steering intermediate shaft x Steering pinion shaft3536026
RACK & PINION POWER STEERING GEAR ASSY
Engine hanger set bolt AZ Series:
1CD±FTV:38
37390
37528
27
Tie rod end sub±assy lock nut7475054
Rack & pinion power steering gear assy set bolt4950036
Steering intermediate shaft x Control valve pinion shaft3536026
Front suspension crossmember sub±assy x Frame11 31,35698
Crossmember bracket x Frame Bolt A:
Bolt B:11 3
801,356 81698
59
Crossmember x Engine mounting insulator RR5253038
Center member x Frame4545933
Center member x Engine mounting insulator FR5253038
Front suspension arm sub±assy lower No.1 x Lower ball joint8990866
Front stabilizer link assy set nut7475555
Pressure feed tube assy x Rack & pinion steering gear assy41 (44.1)414 (450)30 (33)
Steering gear outlet return tube x Rack & pinion steering gear assy41 (44.1)414 (450)30 (33)
Outlet return tube clamp set bolt (LHD)8.08271 in.
lbf
Tie rod end sub±assy x Steering knuckle4950036
Steering intermediate shaft assy No.2 set bolts3536026
Front wheel hub nut1031,05076
( ): For use without SST(s)
http://vnx.su

A79573
A79574
A79834
±
FUEL FUEL PUMP ASSY (1AZ±FSE)
11±53
AVENSIS REPAIR MANUAL (RM1018E)
(c) Remove the 2 bolts first, then remove the fuel pipe sub±
assy No. 1 from the fuel delivery pipe sub±assy.
NOTICE:
Be careful not to damage both the sealing surfaces of the
fuel delivery pipe and the fuel pump when removing the
fuel pipe No.1.
8. REMOVE FUEL PUMP ASSY
(a) Disconnect the fuel pump assy connector.
(b) Remove the 2 nuts and the fuel pump assy.
(c) Remove the fuel pump insulator.
9. INSTALL FUEL PUMP ASSY
(a) Turn the crankshaft and set the camshaft to the position
where the oil port of the camshaft can be seen from the
fuel pump mounting hole.
(b) From the fuel pump mounting hole of the cylinder head,
pour 35 to 45cc (2.14 to 2.75 cu in) engine oil into the cyl-
inder head.
(c) For more smooth rotation, apply engine oil on the cam lobe which can be seen from the fuel pump mounting hole
using fingers.
(d) Set a new fuel pump insulator and fuel pump assy with the 2 nuts.
Torque: 25 N
m (255 kgf
cm, 18 ft
lbf)
http://vnx.su