2003 NISSAN X-TRAIL low oil pressure

IDX-5
A
C
D
E
F
G
H
I
J
K
L B
IDX
ALPHABETICAL INDEX
Front washer ......................................................WW-4
Front wiper .........................................................WW-4
FTS - Wiring diagram ......................................EC-752
Fuel check valve ..............................................EC-372
Fuel cut control (at no load high engine speed)EC-28,
EC-393
,EC-662
Fuel filler lid ........................................................BL-64
Fuel filter ..........................................................EC-664
Fuel filter replacement(QR20DE) .........................FL-4
Fuel filter replacement(YD22DDTi) .......FL-15,MA-30
Fuel gauge ..................................................DI-4,DI-22
Fuel injection control system ...........................EC-660
Fuel injection system .........................EC-194,EC-200
Fuel injector .....................................................EC-727
Fuel injector adjustment resistor ......................EC-777
Fuel injector and fuel tube(QR20DE) ................EM-29
Fuel injector and fuel tube(YD22DDTi) ............EM-135
Fuel leak ..........................................................EC-781
Fuel line inspection(QR20DE) .................FL-3,MA-23
Fuel line inspection(YD22DDTi) ............FL-14,MA-30
Fuel pressure check ............................EC-34,EC-399
Fuel pressure release ..........................EC-34,EC-399
Fuel pressure relief valve ................................EC-665
Fuel pump ..........................................EC-352,EC-627
Fuel pump and gauge(QR20DE) ..........................FL-4
Fuel system(QR20DE) .........................................FL-3
Fuel system(YD22DDTi) .....................................FL-14
Fuel tank(QR20DE) ..............................................FL-9
Fuel tank(YD22DDTi) .........................................FL-21
Fuel temperature sensor .................................EC-751
Fuse ...................................................................PG-12
Fuse and fusible link box ...................................PG-77
Fusible link .........................................................PG-12
G
Gear components (M/T) .......................MT-19
,MT-24
Generator ..........................................................SC-12
Generator - See Alternator ................................SC-12
Generic scan tool (GST) ....................................EC-96
Glass ..................................................GW-41,GW-43
GLOW - Wiring diagram ..................................EC-797
Glow plug .........................................................EC-796
Glow plug(YD22DDTi) .....................................EM-130
Glow relay ........................................................EC-796
Grease ...............................................................MA-17
Grille - See Exterior .............................................EI-11
Ground distribution ............................................PG-13
G-sensor .............................................................TF-50
H
H/AIM - Wiring diagram ......................................LT-15
H/LAMP - Wiring diagram ...........................LT-4,LT-5
H/MIRROR - Wiring diagram ............................GW-10
Harness connector ............................................PG-70
Harness layout ...................................................PG-29
Headlamp .............................................................LT-4
Headlamp aiming control ....................................LT-15
Headlamp leveler - See Headlamp aiming control .......
LT-15
Headlamp washer ............................................WW-19
Headlining - See Roof trim ..................................EI-29
Heated oxygen sensor 1 ....EC-160,EC-166,EC-174,
EC-284
,EC-290,EC-490,EC-581
Heated oxygen sensor 1 heater .........EC-120,EC-568
Heated oxygen sensor 2 ....EC-181,EC-187,EC-296,
EC-303
,EC-587
Heated oxygen sensor 2 heater .........EC-125,EC-573
Heated seat ...............................................SE-3,SE-5
HEATER - Wiring diagram ................................MTC-6
Heater and cooling unit (Heater core) ............ATC-115
Heater mirror .....................................................GW-10
Heater system - Wiring diagram .......................MTC-6
Heater unit (heater core) ..ATC-120,MTC-23,MTC-26
HFC134a (R134a) system precaution ...............ATC-4
HFC134a (R134a) system service procedureATC-123
HFC134a (R134a) system service tools ..........ATC-12
HFC134a system service equipment precautionATC-8
HO2S1 - Wiring diaram ......EC-122,EC-162,EC-169,
EC-177
,EC-492
HO2S2 - Wiring diagram ....EC-183,EC-190,EC-299,
EC-306
HO2S2H - Wiring diagram ...............................EC-127
Hood ....................................................................BL-4
Horn .................................................................WW-23
HORN - Wiring diagram ...................................WW-23
How to erase DTC ...........................................EC-666
HowtoeraseDTCforOBDsystem .....EC-46,EC-402
I
IATS - Wiring diagram .....................................EC-138
IATSEN - Wiring diagram ................................EC-578
Identification .....................................................ATC-10
Idle air volume learning ........................EC-31,EC-396
Idle speed .............................EC-64,EC-412,EC-672
IGN/SG - Wiring diagram .................................EC-335
Ignition coil .........................................EC-334,EC-592
Ignition coil(QR20DE) .......................................EM-27
Ignition control system .......................EC-334,EC-592
Ignition timing .......................................EC-64,EC-412
IGNSYS - Wiring diagram ................................EC-593
ILL - Wiring diagram ...........................................LT-45
Illumination ..........................................................LT-45
In vehicle sensor ...............ATC-95,ATC-97,ATC-106
INJECT - Wiring diagram ....EC-344,EC-619,EC-730
Injection nozzle(YD22DDTi) ...........................EM-135
Injector ...............................................EC-343,EC-618
Input shaft (FF M/T) ..............................MT-19,MT-24
Instrument panel ...................................................IP-3
INT/L - Wiring diagram ........................................LT-65
Intake air temparature sensor ............EC-136,EC-577
Intake door control linkage adjustment ............ATC-66
Intake door motorATC-64,ATC-112,MTC-10,MTC-22
Intake manifold(QR20DE) .................................EM-17

IDX-6
ALPHABETICAL INDEX
Intake manifold(YD22DDTi) ............................EM-115
Intake sensor ................................ATC-101,ATC-108
Intake valve timing control .................EC-117,EC-608
Intake valve timing control solenoid valve ......EC-266,
EC-608
Interior .......................EI-23,EI-25,EI-26,EI-28,EI-29
Interior lamp ........................................................LT-55
Interior lamp on-off control ......................LT-55,LT-56
ISO 15031-5 Mode 1 - 9 ....................................EC-36
IVC - Wiring diagram .......................................EC-268
IVC/V - Wiring diagram ....................................EC-610
J
Joint connector (J/C) .............................PG-72
,PG-76
K
Keyless entry system - See Multi-remote control system
BL-45
Knock sensor (KS) .............................EC-212,EC-496
KS - Wiring diagram ...........................EC-214,EC-498
L
LAN system circuit ...........................................ATC-56
License lamp .......................................................LT-30
Line pressure solenoid valve ...........................AT-179
Line pressure test (A/T) .......................AT-68,AT-290
Liquid gasket application(QR20DE) ....................EM-6
Liquid gasket application(YD22DDTi) .............EM-103
LOAD - Wiring diagram ......................EC-363,EC-638
Location of electrical units .................................PG-64
Lock, door ...............................................BL-54,BL-57
Lubricant (R134a) A/C ........................ATC-5,ATC-21
Lubricants .........................................................MA-17
Lubrication circuit (engine)(QR20DE) ..................LU-5
Lubrication circuit (engine)(YD22DDTi) .............LU-17
Lubrication-locks, hinges and hood latches ......MA-42
M
M/T major overhaul ...............................MT-27
,MT-35
M/T oil replacement ...........................................MT-11
M/T removal and installation ..............................MT-16
MAFS - Wiring diagram .....EC-132,EC-262,EC-466,
EC-708
Magnet clutch .................................ATC-73,ATC-129
MAIN - Wiring diagram .......EC-108,EC-454,EC-701
Mainshaft (M/T) .....................................MT-19,MT-24
Major overhaul (Transfer) ..................................TF-14
Malfunction indicator (MI) ...EC-252,EC-526,EC-667
Malfunction indicator lamp (MIL) ..........EC-48,EC-404
Mass air flow sensor (MAFS) ............EC-130,EC-260,
EC-463
,EC-706
Master cylinder (brake) ......................................BR-13
Master cylinder (clutch) ........................................CL-9
METER - Wiring diagram ...........................DI-8,DI-26
MIL - Wiring diagram ........................EC-253,EC-527
MIL/DL - Wiring diagram ..................................EC-825
MIRROR - Wiring diagram ...............................GW-47
Mirror defogger ................................................GW-10
Mirror, door ......................................................GW-46
Mirror, out side .................................................GW-46
Misfire ..............................................................EC-206
Mode door control linkage adjustment ...........ATC-61,
ATC-118
,MTC-8,MTC-27
Mode door motor ............................ATC-58,ATC-118
Molding - See Exterior ........GW-3,EI-14,EI-16,EI-17
Mud guard - See Exterior ....................................EI-16
MULTI - Wiring diagram .....................................BL-47
Multiport fuel injection (MFI) system ...EC-24,EC-389
Multi-remote control system ...............................BL-45
N
NATS - Wiring diagram ......................................BL-72
NATS (Nissan anti-theft system) .......................BL-70
NVH troubleshooting (BR) .........................BR-5,PB-2
NVH troubleshooting (CL) ....................................CL-4
NVH troubleshooting (EM)(QR20DE) ...............EM-11
NVH troubleshooting (EM)(YD22DDTi) ..........EM-108
NVH troubleshooting (FSU) ..............................FSU-4
NVH troubleshooting (M/T) .................................MT-8
NVH troubleshooting (PR) .................................FAX-6
NVH troubleshooting (RA) ................................RAX-5
NVH troubleshooting (RAX) ..............................RAX-5
NVH troubleshooting (RSU) ..............................RSU-4
NVH troubleshooting (ST) ....................................PS-4
NVH troubleshooting (Transfer) ...........................TF-7
NVH troubleshooting (WT) ..................................WT-2
O
Oil cooler (engine)(QR20DE) .............................LU-13
Oil cooler (engine)(YD22DDTi) ..........................LU-25
Oil filter(QR20DE) ................................................LU-9
Oil filter(YD22DDTi) ...........................................LU-20
Oil pan (engine)(QR20DE) ...............................EM-24
Oil pan (engine)(YD22DDTi) ...........................EM-125
Oil pressure (engine)(QR20DE) ..........................LU-7
Oil pressure (engine)(YD22DDTi) ......................LU-18
Oil pump (engine)(QR20DE) .............................LU-10
Oil pump (engine)(YD22DDTi) ...........................LU-23
Oil pump regulator valve (engine)(QR20DE) .....LU-11
Oil pump regulator valve (engine)(YD22DDTi) ..LU-24
On board diagnostic system ...............EC-36,EC-401
Operating cylinder (clutch) .................................CL-11
Out side mirror .................................................GW-46
Overdrive control switch ....................AT-265,AT-387
Overheat ..........................................................EC-761
Oversize piston(QR20DE) ................................EM-85
Oversize piston(YD22DDTi) ...........................EM-204

IDX-7
A
C
D
E
F
G
H
I
J
K
L B
IDX
ALPHABETICAL INDEX
P
Park/Neutral position switchEC-325
,EC-614,EC-814
Park/neutral position switch (A/T) ....................AT-130
Park/neutral position switch (M/T) .....................MT-13
PCV (positive crankcase ventilation) .EC-375,EC-650
PGC/V - Wiring diagram ..................................EC-235
PHASE - Wiring diagram ...................EC-225,EC-509
Piston assembly(QR20DE) ................................EM-85
Piston pin inspection(QR20DE) .........................EM-81
Piston pin inspection(YD22DDTi) ....................EM-197
Piston ring inspection(QR20DE) ........................EM-82
Piston ring inspection(YD22DDTi) ...................EM-201
Piston to bore clearance(QR20DE) ...................EM-85
Piston to bore clearance(YD22DDTi) ..............EM-204
PNP/SW - Wiring diagram .................EC-327,EC-815
PNPSW1 - Wiring diagram ..............................EC-615
POS - Wiring diagram ........................EC-219,EC-503
POWER - Wiring diagram ....................................PG-3
Power antenna ..................................................AV-15
Power door lock ..................................................BL-11
Power socket ...................................................WW-27
Power steering fluid level .........................PS-5,MA-41
Power steering gear ..........................................PS-12
Power steering oil pressure switch ..................EC-820
Power steering oil pump ....................................PS-23
Power steering pressure (PSP) sensor ..........EC-244,
EC-518
Power supply routing ...........................................PG-2
Power window ..................................................GW-20
Precations for Leak detection dye ...................ATC-10
PRGVLV - Wirng diagram ...............................EC-603
Propeller shaft .....................................................PR-2
Propeller shaft on vehicle service ........................PR-2
PS/SEN - Wiring diagram ..................EC-246,EC-520
PST/SW - Wiring diagram ...............................EC-821
Q
Quick-glow system ..........................................EC-796
R
R/FOG - Wiring diagram .....................................LT-37
Radiator fan - See Cooling fan(QR20DE) .........CO-13
Radiator fan - See Cooling fan(YD22DDTi) .......CO-34
Radiator(QR20DE) ...............................CO-12,CO-15
Radiator(YD22DDTi) ............................CO-33,CO-36
Radio - See Audio ...............................................AV-3
Rear air spoiler ....................................................EI-21
Rear bumper ..........................................................EI-9
Rear cover packing replacement diff. ..............RFD-10
Rear disc brake .................................................BR-27
Rear door ..............................................................BL-8
Rear fog lamp .....................................................LT-37
Rear panel finisher ..............................................EI-22
Rear seat ...........................................................SE-11
Rear seat belt ......................................................SB-4
Rear side window ...............................................GW-5
Rear suspension ...............................................RSU-5
Rear washer ....................................................WW-13
Rear window defogger ........................................GW-9
Rear wiper .......................................................WW-13
Refrigerant connection precaution .....................ATC-5
Refrigerant discharging evacuating chargingATC-123
Refrigerant general precaution ..........................ATC-4
Refrigerant lines .............................................ATC-123
Refrigerant pressure sensorEC-359,EC-634,ATC-16,
ATC-80
,ATC-137
Refrigeration cycle ...........................................ATC-16
Release bearing (clutch) ....................................CL-13
Removal and installation (A/T) .........................AT-458
Removal and installation (Transfer) ...................TF-12
Reverse idler shaft (M/T) ......................MT-19,MT-24
Reverselampswitch(M/T)-SeeBack-uplampswitch
(M/T) ..................................................................MT-13
Reverse main gear (M/T) ......................MT-19,MT-24
Rocker cover(QR20DE) ....................................EM-31
Rocker cover(YD22DDTi) ...............................EM-147
Room lamp .........................................................LT-55
Room lamp - See Interior lamp ...........................LT-55
ROOM/L - Wiring diagram ..................................LT-55
RP/SEN - Wiring diagram ..................EC-360,EC-635
RRO2 - Wiring diagram ...................................EC-588
RRO2/H - Wiring diagram ................................EC-574
S
S/LOCK - Wiring diagram .......................BL-13
,BL-27
S/SIG - Wiring diagram .......EC-349,EC-624,EC-818
SCTC/V - Wiring diagram ................................EC-774
Seat belt inspection ..........................................MA-42
Seat belt pre-tensioner disposal .....................SRS-40
Seat belt, front .....................................................SB-3
Seat belt, rear ......................................................SB-4
Seat, front ............................................................SE-7
Seat, rear ...........................................................SE-11
Self-diagnosis (Transfer) ...................................TF-45
SHIFT - Wiring diagram ...................................AT-447
Shift control components (M/T) .............MT-21,MT-26
Shift fork (M/T) ......................................MT-21,MT-26
Shift lever ...........................................................MT-14
Shift lock system ..............................................AT-446
Shift schedule ..................................................AT-563
Shift solenoid valve A (A/T) ..AT-151,AT-156,AT-170
Shift solenoid valve B (A/T) ...............AT-151,AT-156
Side air bag (satellite) sensor .........................SRS-37
Side trim ..............................................................EI-26
Side window - See Rear side window .................GW-5
Spark plug replacement(QR20DE) ...................MA-25
Spark plug(QR20DE) ........................................EM-28
Specification value .............................EC-103,EC-449
Speedometer .............................................DI-4,DI-22
Spiral cable .....................................................SRS-31
Spot lamp ............................................................LT-65
SROOF - Wiring diagram .....................................RF-3

LT-6
HEADLAMP
Trouble Diagnoses
EKS003CF
Aiming AdjustmentEKS003CG
When performing headlamp aiming adjustment, use an aiming machine, aiming wall screen or headlamp
tester. Aimers should be in good repair, calibrated and operated in accordance with respective operation man-
uals.
If any aimer is not available, aiming adjustment can be done as follows:
For details, refer to the regulations in your own country.
lKeep all tires inflated to correct pressures.
lPlace vehicle and tester on one and same flat surface.
lSee that there is no-load in vehicle (coolant, engine oil filled up to correct level and full fuel tank) other
than the driver (or equivalent weight placed in driver's position).
Symptom Possible cause Repair order
Headlamp LH do not operate.1. Bulb
2. Grounds E24 and E50
3. 15A fuse
4. Lighting switch1. Check bulb.
2. Check grounds E24 and E50.
3. Check 15A fuse (No. 40, located in fuse
and fusible link box). Verify battery posi-
tive voltage is present at terminal 8 of
lighting switch.
4. Check lighting switch.
Headlamp RH do not operate.1. Bulb
2. Grounds E24 and E50
3. 15A fuse
4. Lighting switch1. Check bulb.
2. Check grounds E24 and E50.
3. Check 15A fuse (No. 41, located in fuse
and fusible link box). Verify battery posi-
tive voltage is present at terminal 5 of
lighting switch.
4. Check lighting switch.
High beam LH do not operate, but low
beam LH operates.1. Bulb
2. Open in high beam LH circuit
3. Lighting switch1. Check bulbs.
2. Check the wire between lighting switch
terminal 9 and headlamp LH terminal 1
for an open circuit.
3. Check lighting switch.
Low beam LH does not operate, but high
beam LH operates.1. Bulb
2. Open in low beam LH circuit
3. Lighting switch1. Check bulb.
2. Check the wire between lighting switch
terminal 10 and headlamp LH terminal 3
for an open circuit.
3. Check lighting switch.
High beam RH do not operate, but low
beam RH operates.1. Bulb
2. Open in high beam RH circuit
3. Lighting switch1. Check bulbs.
2. Check the wire between lighting switch
terminal 6 and headlamp RH terminal 1
for an open circuit.
3. Check lighting switch.
Low beam RH does not operate, but high
beam RH operates.1. Bulb
2. Open in low beam RH circuit
3. Lighting switch1. Check bulb.
2. Check the wire between lighting switch
terminal 7 and headlamp RH terminal 3
for an open circuit.
3. Check lighting switch.
High beam indicator does not work.1. Bulb
2. Grounds M27 and M70
3. Open in high beam circuit1. Check bulb in combination meter.
2. Check grounds M27 and M70.
3. Check the wire between lighting switch
terminal 9 and combination meter termi-
nal 61(LHD models) or 50(RHD models)
for an open circuit.

ENGINE OIL
LU-7
[QR20DE]
C
D
E
F
G
H
I
J
K
L
MA
LU
ENGINE OILPFP:KLA92
InspectionEBS009SU
OIL LEVEL AND MUDDINESS
lBefore starting the engine, check the oil level. If the engine is
already started, stop it and allow 10 minutes before checking.
lCheck that the oil level is within the range shown in the figure.
lIf it is out of range, adjust it.
lCheck the oil for white turbidity or remarkable contamination.
lIf the oil becomes turbid and white, it is highly probable that it is
contaminated with coolant. Find the cause and repair.
OIL LEAKAGE
Check for oil leakage around the following area.
lOil pan
lOil pan drain plug
lOil pressure switch
lOil filter
lIntake valve timing control cover
lFront cover
lMating surface between cylinder block and cylinder head
lMating surface between cylinder head and rocker cover
lCrankshaft oil seal.
OIL PRESSURE CHECK
WA RN ING:
lBe careful not to burn yourself, as the engine oil is hot.
lOil pressure check should be done in “ Parking position”.
1. Check the oil level.
2. Remove the under cover.
3. Remove the oil pressure switch to connect the oil pressure
gauge.
4. After warming up the engine, check that oil pressure corre-
sponding to the engine speed is produced.
Engine oil pressure [Oil temperature is 80°C (176°F)]
5. After checking, install the oil pressure switch as follows.
a. Remove old sealant adhering to the switch and engine.
b. Apply thread sealant.
Use Genuine Liquid Gasket or equivalent.
PBIC0249E
KBIA0275E
Engine speed (rpm) Idle speed 2,000 6,000
Engine pressure
kPa (bar.kg/cm
2,psi)Approx. 98 (0.98, 1.0, 14) or more Approx. 294 (2.9, 3.0, 43) or more Approx. 392 (3.9, 4.0, 57) or more
: 12.3 - 17.2 N·m (1.25 - 1.75 kg-m, 10 - 12 ft-lb)

OIL COOLER
LU-13
[QR20DE]
C
D
E
F
G
H
I
J
K
L
MA
LU
OIL COOLERPFP:21305
Removal and InstallationEBS009SZ
WA RN ING:
lBe careful not to get burned when the engine and engine oil are hot.
CAUTION:
lWhen removing oil cooler, prepare a shop cloth to absorb any oil leakage or spillage.
lCompletely wipe off any oil that adhere to the engine and the vehicle.
REMOVAL
1. Remove front RH wheel and engine room right side cover.
2. Drain coolant by removing cylinder block drain plug and radiator drain cock. Refer toCO-9, "
DRAINING
ENGINE COOLANT".
3. Paint a mating mark at the oil cooler and oil cooler bracket.
INSPECTION
Oil Cooler
lCheck oil cooler for cracks. Check oil cooler for clogging by blowing through coolant inlet. If necessary,
replace oil cooler assembly.
Oil Pressure Relief Valve
lInspect oil pressure relief valve for movement, cracks and breaks by pushing the ball. If replacement is
necessary, remove valve by prying it out with a suitable tool. Install a new valve in place by tapping it.
INSTALLATION
Installation is in the reverse order of removal.
PBIC0278E
1 Oil pressure switch 2 Oil cooler bracket 3 Oil cooler
4Gasket

LU-14
[QR20DE]
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
PFP:00030
Standard and LimitEBS00BLZ
OIL PRESSURE
OIL PUMP
Unit: mm (in)
REGULATOR VALVE
Unit: mm (in)
OIL CAPACITY
Unit: · (Imp qt)
TIGHTENING TORQUE
Unit: N·m (kg-m, ft-lb) N·m(kg-m, in-lb)* Engine speed rpm
Approximate discharge pressure kPa (bar, kg/cm
2,psi)
Idle speed
2,000
6,000More than 98 (0.98, 1.0, 14)
294 (2.9, 3.0, 43)
392 (3.9, 4.0, 57)
Body to outer rotor radial clearance 0.114 - 0.179 (0.0045 - 0.0070)
Inner rotor to outer rotor tip clearance Below 0.220 (0.0087)
Body to inner rotor axial clearance 0.030 - 0.070 (0.0012 - 0.0028)
Body to outer rotor axial clearance 0.060 - 0.110 (0.0024 - 0.0043)
Inner rotor to brazed portion of housing clearance 0.035 - 0.070 (0.0014 - 0.0028)
Regulator valve to oil pump cover clearance 0.040 - 0.097 (0.0016 - 0.0038)
With oil filter change Approximately 3.9 (3-3/8)
Without oil filter change Approximately 3.5 (3-1/8)
Dry engine (engine overhaul) Approximately 4.5 (4)
Oil pressure switch 12.3 - 17.2 (1.25 - 1.75, 9 - 12)
Oil pan drain plug 29.4 - 39.2 (3.0 - 4.0, 22 - 28)
Oil pump assembly 6.4 - 7.5 (0.66 - 0.76, 57 - 66)*
Oil pump cover 5.9 - 7.9 (0.60 - 0.81, 52 - 70)*
Regulator plug 39.2 - 68.6 (4.0 - 7.0, 29 - 50)

LU-18
[YD22DDTi]
ENGINE OIL
ENGINE OIL
PFP:KLA92
InspectionEBS00B03
OIL LEVEL AND MUDDINESS
lBefore starting the engine, check the oil level. If the engine is
already started, stop it and allow 10 minutes before checking.
lCheck that the oil level is within the range shown in the figure.
lIf it is out of range, adjust it.
lCheck the oil for white turbidity or remarkable contamination.
lIf the oil becomes turbid and white, it is highly probable that it is
contaminated with coolant. Find the cause and repair.
OIL LEAKAGE
Check for oil leakage around the following area.
lOil pan
lOil pan drain plug
lOil pressure switch
lOil filter bracket
lVacuum pump
lCylinder head rear cover assembly
lChain case
lOil pump housing
lMating surface between cylinder block and cylinder head
lMating surface between cylinder head and rocker cover
lOil cooler.
lCrankshaft oil seal
OIL PRESSURE CHECK
WAR NIN G:
lBe careful not to burn yourself, as the engine oil is hot.
lOil pressure check should be done in “ Parking position”.
1. Check the oil level.
2. Remove the under cover.
3. Remove the oil pressure switch to connect the oil pressure
gauge.
4. After warming up the engine, check that oil pressure corre-
sponding to the engine speed is produced.
Engine oil pressure [Oil temperature is 80°C (176°F)]
5. After checking, install the oil pressure switch as follows.
a. Remove old sealant adhering to the switch and engine.
b. Apply thread sealant.
Use Genuine Liquid Gasket or equivalent.
SBIA0122E
SBIA0123E
Engine speed (rpm) Idle speed 2,000 4,000
Engine pressure
kPa (bar, kg/cm
2,psi)Approx. 140 (1.40, 1.43, 20.3) or
moreApprox. 270 (2.69, 2.75, 39.1) or
moreApprox. 430 (4.29, 4.38, 62.3) or
more