2003 NISSAN MAXIMA key

5. If necessary , operate the joystick to adjust
the location of the destination (waypoint).
T ouch the
Setting key and touch the
Destination key to confirm. The
[DEST . SETTING] screen will be displayed.
T o set the destination (waypoint), refer to
“Making the system guide the route with
detailed options” on page 5-17.
SETTING WITHAddress/Street
KEY
Sets the destination (waypoint) from the street
names and addresses that you enter .There are two search methods; direct search by
the street names, and search by the street
names after a city is defined.
1. Press the DEST button.
2. Select the
Address/Street key .
NOTE:
The location displayed using the house
number is the vicinity of the locations
corresponding to the house numbers
stored in the data. It may differ from the
actual location.3. A keyboard will be displayed on the [DEST .
SETTING (Address/Street)] screen. Enter
the street name you want to set.
INFO:
It is not possible to enter names if they are not
stored in the CD-ROM.
INV0284
INV0280
INV0281
HOW DO I PROGRAM A DESTINATION?
5-6

4. Enter the street name of your destination.
For example, enter
T , thenU.
5. Enter
U , then select theList key .
The list screen of street names which have
TU at the top will appear .
If less than 5 suggested streets remain, they
will be displayed automatically .

The city names and street names will be
displayed.

Use the joystick or the ON-SCREENor
key to scroll the display .

Select the
Previous key on the screen to
display the input screen for street names.
6. Select one street of your destination.7. Enter the house number .
Select the
Enter key to display the [DEST .
SETTING] screen.
8. T o set destination, select route priorities
and select
OK . Refer to “Making the sys-
tem guide the route with detailed options”
on page 5-17.
NOTE:
T o slightly after the destination, select
the
Mapkey to display the map of the
area around the house number .
INV0282INV0283INV0335
HOW DO I PROGRAM A DESTINATION?
5-7

An approximate location corresponding to
the entered house number is displayed. If
necessary , correct the location using the
joystick.

The location displayed by the calculation
using the house number may differ from the
actual location. In that case, correct the lo-
cation using the joystick.

Press the PUSH ENTER switch.

Select the
Dest. key .INFO:
For streets with no house numbers stored in
the data, the map of a typical location will be
displayed.
The [DEST . SETTING] screen will appear .
Please refer to “Making the system guide the
route with detailed options” on page 5-17.
INFO:
When the city name is known, the street name
can be defined quickly using theCity key .
SETTING WITHIntersectionKEY
This will allow you to set an intersection as a
destination (waypoints).
1. Press the DEST button.
2. Select the
Intersection key .
A keyboard will be displayed.
INV0285
INV0286INV0287
HOW DO I PROGRAM A DESTINATION?
5-8

3. Enter the first street name where the des-
tination (waypoint) is located using the key-
board, then select the
List key .4. Select the first street name using the same
procedures.
INFO:

For a road where lanes with different traffic
directions are shown separately , the list
shows first street name, second street
name, ...

When entering a street name, enter a minor
street name as the first street and the cal-
culation will be easier and quicker .5. Enter the 2nd (intersecting) street name,
then select the
List key .
INFO:
If there are less than 5 streets which intersect
the first street, they will be displayed automati-
cally .
INV0288INV0289INV0290
HOW DO I PROGRAM A DESTINATION?
5-9

6. Select the name of the second street.
The [DEST . SETTING] screen will appear .
7. T o set the destination, select route priorities
then select
OK . Refer to “Making the
system guide the route with detailed op-
tions” on page 5-17.
INFO:
T o adjust the location of the destination, select
the
Map key to display the map on which the
intersection is indicated.
T ouch the
Setting key .
INFO:
If necessary , adjust the position using the joy-
stick.

Select the
Destination key .The [DEST . SETTING] screen will appear .
T o set the destination, refer to “Making the sys-
tem guide the route with detailed options” on
page 5-17.
INFO:
When the city name is known, the street (in-
tersection) name can be defined quickly using
the
City key .
NOTE:
When the corresponding data does not
INV0291INV0292INV0293
HOW DO I PROGRAM A DESTINATION?
5-10

exist under the following conditions, the
street name list may not be displayed:

A street name is being input after the
Citykey has been selected.

List is being displayed by selection of
the
Listkey .
SETTING WITH
Point of Interest (POI)KEY
The Nissan Navigation System includes a da-
tabase of Point of Interest (POI) locations such
as restaurants, hotels, and gas station. (ref.
page 6-9.)
By using this feature, you can set a Point of
Interest location as a destination. For details on
how to use the POI feature, please refer to sec-
tion 6.
SETTING WITHCityKEY
Sets the destination (waypoint) on the map
screen of the area in and around the input city .
1. Press the DEST button.
2. Select the
City key on the [DEST . SET -
TING] screen.
INV0294
INV0316
HOW DO I PROGRAM A DESTINATION?
5-11

3. Enter the characters of the city name which
you wish to set as destinations (waypoints)
using the keyboard on the [DEST . SETTING
(city)] screen, then select the
List key .
INFO:

When the
List key is selected, the data of
the currently-listed cities will be displayed.

If less than 5 suggested cities remain, they
will be displayed automatically .4. Select the city name of your destination
(waypoint) on the [DEST . SETTING (city)]
screen will appear the [DEST . SETTING]
screen.5. T o set the destination (waypoint), select
route priorities and select
OK . Refer to
“Making the system guide the route with
detailed options” on page 5-17.
INV0317INV0320INV0274
HOW DO I PROGRAM A DESTINATION?
5-12

INFO:
If you select the
Info key in step 4, the ad-
dress and telephone number of the facility will
be displayed. If you select the
Enter key , the [DEST . SETTING] screen will
be displayed.
6. T o set the destination (waypoint), refer to
“Making the system guide the route with
detailed options” on page 5-17.NOTE:
If you select the
Mapkey in step 6, the
map screen of the area around the
specified destination (waypoint)will be
displayed.
If necessary , operate the joystick to adjust
the location of the destination (waypoint).
T ouch the
Setting key and touch the
Destination key to confirm.
The [DEST . SETTING] screen will be dis-
played.
T o set the destination (waypoint), refer to“Making the system guide the route with
detailed options” on page 5-17.
SETTING WITHMapKEY
This will enable you to zoom into the map for
detail and set the desired location. This works
best when you know the location geographi-
cally , or want to check the geographical sur-
roundings on the map before setting the des-
tinations.
1. Press the DEST button.
2. Select the
Map key .
INV0321INV0322
INV0323
HOW DO I PROGRAM A DESTINATION?
5-13