Page 3438 of 4500
Fig. 157: Applying Seal Packing To Camshaft Housing Plug
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
4. Install the camshaft housing plug to the cylinder head as shown in the illustration.
5. Install the oil control valve filter to the cylinder head.
Page 3500 of 4500
<0029004c004a00110003001500140019001d00030036004800570057004c0051004a00030037004c0050004c0051004a0003003000440055004e00030032004900030026004400500056004b004400490057000300300044004c00510003002a0048004400
55[
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d. Uniformly loosen the 22 bearing cap bolts in several passes in the sequence shown in the
illustration.
e. Remove the 22 bearing cap bolts, 4 seal washers, oil feed pipe, 9 bearing caps, camshaft housing
plug, oil control valve filter and 2 camshafts.
Page 3519 of 4500
Fig. 235: Installing Camshaft Housing Plug
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
5. Install the camshaft housing plug to the cylinder head as shown in the illustration.
6. Install the oil control valve filter to the cylinder head.
Page 3531 of 4500
Fig. 247: Mounting Hexagon Wrench Head Portion Of Intake Camshaft In A Vise
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d. Uniformly loosen the 22 bearing cap bolts in several passes in the sequence shown in the
illustration.
e. Remove the 22 bearing cap bolts, 4 seal washers, oil feed pipe, 9 bearing caps, camshaft housing
plug, oil control valve filter and 2 camshafts.
f. Do not pry the camshaft with a tool by applying excessive force to it.
g. Do not damage the reception part of the thrust on the cylinder head side.
Page 3549 of 4500
Fig. 265: Applying Seal Packing To Front Bearing Cap
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
e. Install the camshaft housing plug to the cylinder head as shown in the illustration.
f. Install the oil control valve filter to the cylinder head.
Page 4288 of 4500
Fig. 100: Installing Filter Into Modulator
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Install the cap to the modulator.
1. Apply compressor oil to the O-rings and thread of the cap.
Compressor oil: ND-OIL 8 or equivalent
2. Using a hexagon wrench 10 mm (0.39 in.), install the caps.
Torque: 12.3 N.m (125 kgf.cm, 9 ft.lbf)
