2003 Hyundai H-1 (Grand Starex) manual radio set

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-42 3.3.
3.3.
3. BASS Control Knob
BASS Control Knob BASS Control Knob
BASS Control Knob
BASS Control Knob
Press to pop the knob out and turn to the left or right for the desired bass tone.
TREB (Treble Control) Knob
TREB (Treble Control) Knob TREB (Treble Control) Knob
TREB (Treble Control) Knob
TREB (Treble Control) Knob
Pull the bass control knob further out. Turn tothe left or right for the desired treble tone.
4.4.
4.4.
4.
SCAN Button
SCAN Button SCAN Button
SCAN Button
SCAN Button
When the scan button is pressed, the fre-quency will increase and the receivable sta-tions will be tuned in one after another, receiv-ing each station for 5 seconds. To stop scan-ning, press the scan button again.
5. TUNE (Manual) Select Button
5. TUNE (Manual) Select Button 5. TUNE (Manual) Select Button
5. TUNE (Manual) Select Button
5. TUNE (Manual) Select Button
Press the ( ) side or ( ) side to increase or todecrease the frequency. Press either buttonand hold down to continuously scroll. Releasebutton once the desired station is reached.
SEEK Operation (Automatic Channel
SEEK Operation (Automatic Channel SEEK Operation (Automatic Channel
SEEK Operation (Automatic Channel
SEEK Operation (Automatic Channel
Selection)
Selection) Selection)
Selection)
Selection)
Press the TUNE select button for 0.5 sec ormore, and releasing will automatically tune thenext available station with beep sound. When the ( ) side is pressed longer than 0.5 second and releasing will automatically tunethe next higher frequency and when the ( )side is pressed longer than 0.5 second andreleasing will automatically tune the next lowerfrequency. 6. BAND Selector
6. BAND Selector 6. BAND Selector
6. BAND Selector
6. BAND Selector
Pressing the button changes the AM, FM1and FM2 bands. The mode selected is dis-played on LCD.
7. PRESET STATION SELECT Button
7. PRESET STATION SELECT Button 7. PRESET STATION SELECT Button
7. PRESET STATION SELECT Button
7. PRESET STATION SELECT Button
Six (6) stations for AM, FM or FM2 respectivelycan be preset in the electronic memory circuiton this unit.
HOW TO PRESET STATIONS
HOW TO PRESET STATIONS HOW TO PRESET STATIONS
HOW TO PRESET STATIONS
HOW TO PRESET STATIONS
Six AM and twelve FM stations may be pro-grammed into the memory of the radio. Then,by simply pressing the band select button and/or one of the six station select buttons, you mayrecall any of these stations instantly. To pro-gram the stations, follow these steps:
o Press band selector to set the band for AM, FM or FM2.
o Select the desired station to be stored by seek, scan or manual tuning.
o Determine the preset station select button you wish to use to access that station.
o Press the station select button for more than two seconds. A select button indicator willshow in the display indicating which selectbutton you have depressed. The frequencydisplay will flash after it has been stored intothe memory.
H260B02E-AAT
1.1.
1.1.
1. POWER ON-OFF Control Knob
POWER ON-OFF Control Knob POWER ON-OFF Control Knob
POWER ON-OFF Control Knob
POWER ON-OFF Control Knob
The radio unit may be operated when the igni-
tion key is in the "ACC" or "ON" position. Pressthe knob to switch the power on. The LCDshows the radio frequency in the radio mode orthe CD track indicator in either the CD mode orCD AUTO CHANGER mode. To switch thepower off, press the knob again.
VOLUME Control
VOLUME Control VOLUME Control
VOLUME Control
VOLUME Control
Rotate the knob clockwise to increase the vol-
ume and turn the knob counterclockwise toreduce the volume.
BALANCE Control
BALANCE Control BALANCE Control
BALANCE Control
BALANCE Control
Pull and turn the control knob clockwise to
emphasize right speaker sound (Left speakersound will be attenuated). When the controlknob is turned counterclockwise, left speakersound will be emphasized. (Right speaker soundwill be attenuated)
2. FAD (Fader Control) Knob
2. FAD (Fader Control) Knob 2. FAD (Fader Control) Knob
2. FAD (Fader Control) Knob
2. FAD (Fader Control) Knob
Turn the control knob counterclockwise to em-
phasize front speaker sound. (Rear speakersound will be attenuated) When the controlknob is turned clockwise, rear speaker soundwill be emphasized. (Front speaker sound willbe attenuated)
FM/AM

2-49
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
H290B01P-GAT 1.1.
1.1.
1. POWER ON-OFF Control Knob
POWER ON-OFF Control Knob POWER ON-OFF Control Knob
POWER ON-OFF Control Knob
POWER ON-OFF Control Knob
The radio unit may be operated when the igni-
tion key is in the "ACC" or "ON" position. Press the button to switch the power on. The displayshows the radio frequency in the radio mode orthe tape direction indicator in the tape mode, orCD track either the CD mode or CD AUTOCHANGER mode. To switch the power off,press the button again.
VOLUME Control
VOLUME Control VOLUME Control
VOLUME Control
VOLUME Control
Rotate the knob clockwise to increase the vol-
ume and turn the knob counterclockwise toreduce the volume.
2.2.
2.2.
2.
BASS/BALANCE Control Knob
BASS/BALANCE Control Knob BASS/BALANCE Control Knob
BASS/BALANCE Control Knob
BASS/BALANCE Control Knob
BASS Control Knob
BASS Control Knob BASS Control Knob
BASS Control Knob
BASS Control Knob
Press to pop the knob out. To increase the
bass, rotate the knob clockwise, while to de-crease the bass, rotate the knob counterclock-wise.
BALANCE Control knob
BALANCE Control knob BALANCE Control knob
BALANCE Control knob
BALANCE Control knob
Further pull the popped-up knob. Rotate the
knob clockwise to emphasize right speakersound. (Left speaker sound will be attenuated)When the control knob is turned counterclock-wise, left speaker sound will be emphasized(Right speaker sound will be attenuated). 3.3.
3.3.
3. TREBLE/FAD Knob
TREBLE/FAD Knob TREBLE/FAD Knob
TREBLE/FAD Knob
TREBLE/FAD Knob
TREBLE Control Knob
TREBLE Control Knob TREBLE Control Knob
TREBLE Control Knob
TREBLE Control Knob
Press to pop the knob out and turn to the left or
right for the desired treble tone.
FAD (Fader Control) Knob (Minibus
FAD (Fader Control) Knob (Minibus FAD (Fader Control) Knob (Minibus
FAD (Fader Control) Knob (Minibus
FAD (Fader Control) Knob (Minibus
only)
only) only)
only)
only)
Further pull the popped-up knob. Turn the con-
trol knob counterclockwise to emphasize frontspeaker sound. (Rear speaker sound will beattenuated) When the control knob is turnedclockwise, rear speaker sound will be empha-sized. (Front speaker sound will be attenuated)
4.4.
4.4.
4.
TUNE (Manual) Select Button
TUNE (Manual) Select Button TUNE (Manual) Select Button
TUNE (Manual) Select Button
TUNE (Manual) Select Button
Press the ( ) side or ( ) side to increase or to
decrease the frequency. With the button helddown for 0.5 sec. or more, the stop signal(broadcasting radio wave) is ignored and chan-nel selection continues.
SEEK Operation (Automatic Channel
SEEK Operation (Automatic Channel SEEK Operation (Automatic Channel
SEEK Operation (Automatic Channel
SEEK Operation (Automatic Channel
Selection)
Selection) Selection)
Selection)
Selection)
Press the TUNE select button for 1 sec or
more, and releasing will automatically tune thenext available station with beep sound. When the ( ) side is pressed longer than 1
second and releasing will automatically tunethe next higher frequency and when the ( )side is pressed longer than 1 second and re-leasing will automatically tune the next lowerfrequency. 5.5.
5.5.
5. PRESET STATION Select Buttons
PRESET STATION Select Buttons PRESET STATION Select Buttons
PRESET STATION Select Buttons
PRESET STATION Select Buttons
Six (6) stations for AM, FM and FM2 respec-
tively can be preset in the electronic memorycircuit.
HOW TO PRESET STATIONS
HOW TO PRESET STATIONS HOW TO PRESET STATIONS
HOW TO PRESET STATIONS
HOW TO PRESET STATIONS
Six AM and twelve FM stations may be pro-
grammed into the memory of the radio. Then,by simply pressing the band select button and/or one of the six station select buttons, you mayrecall any of these stations instantly. To pro-gram the stations, follow these steps:
o Press band selector to set the band for AM, FM and FM2.
o Select the desired station to be stored by seek or manual tuning.
o Determine the preset station select button you wish to use to access that station.
o Press the station select button for more than two seconds. A select button indicator will show in the display indicating which selectbutton you have depressed. The frequencydisplay will flash after it has been stored intothe memory with beep sound. You shouldthen release the button, and proceed toprogram the next desired station. A total of18 stations can be programmed by selectingone AM and two FM station per button.
o When completed, any preset station may be recalled by selecting AM, FM or FM2 bandand the appropriate station button.

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-58
B870A01A-GAT ANTENNA
ANTENNA ANTENNA
ANTENNA
ANTENNA
Fixed Rod Antenna (If installed)
Fixed Rod Antenna (If installed) Fixed Rod Antenna (If installed)
Fixed Rod Antenna (If installed)
Fixed Rod Antenna (If installed)
Your car uses a fixed rod antenna to receive
both AM and FM broadcast signals.
This antenna is a removable type. To remove
the antenna, turn the antenna counterclock- wise. To install the antenna, turn the antennaclockwise.
CAUTION:
CAUTION: CAUTION:
CAUTION:
CAUTION:
Be sure to remove the antenna before wash-
Be sure to remove the antenna before wash- Be sure to remove the antenna before wash-
Be sure to remove the antenna before wash-
Be sure to remove the antenna before wash- ing the car in an automatic car wash or the
ing the car in an automatic car wash or the ing the car in an automatic car wash or the
ing the car in an automatic car wash or the
ing the car in an automatic car wash or the
antenna may be damaged.
antenna may be damaged. antenna may be damaged.
antenna may be damaged.
antenna may be damaged. B870B01Y-AAT
Power Antenna (If installed)
Power Antenna (If installed) Power Antenna (If installed)
Power Antenna (If installed)
Power Antenna (If installed)
B870C01A-GAT
Manual Antenna
Manual Antenna Manual Antenna
Manual Antenna
Manual Antenna
B870C01P
Your car uses a manual stainless steel antenna
to receive both AM and FM broadcast signals. Pull up the antenna using your fingers, asshown in the drawing.
NOTE:
NOTE: NOTE:
NOTE:
NOTE:
Before entering an automatic car wash or a
Before entering an automatic car wash or a Before entering an automatic car wash or a
Before entering an automatic car wash or a
Before entering an automatic car wash or a place with a low height clearance, be sure
place with a low height clearance, be sure place with a low height clearance, be sure
place with a low height clearance, be sure
place with a low height clearance, be sure
that the antenna is fully retracted.
that the antenna is fully retracted. that the antenna is fully retracted.
that the antenna is fully retracted.
that the antenna is fully retracted.B870B01P
The antenna will automatically be extended when the radio power switch is turned on whilethe ignition key is in either the "ON" or "ACC"position. The antenna will automatically be re-tracted and stored when either the radio powerswitch is turned off or the ignition key is set tothe "LOCK" position.
NOTE:
NOTE: NOTE:
NOTE:
NOTE:
oo
oo
o Before turning on the radio, make sure
Before turning on the radio, make sure Before turning on the radio, make sure
Before turning on the radio, make sure
Before turning on the radio, make sure
that no one is near the antenna.
that no one is near the antenna. that no one is near the antenna.
that no one is near the antenna.
that no one is near the antenna.
oo
oo
o Before entering an automatic car wash
Before entering an automatic car wash Before entering an automatic car wash
Before entering an automatic car wash
Before entering an automatic car wash
or a place with a low height clearance, be
or a place with a low height clearance, be or a place with a low height clearance, be
or a place with a low height clearance, be
or a place with a low height clearance, be
sure that the antenna is retracted and
sure that the antenna is retracted and sure that the antenna is retracted and
sure that the antenna is retracted and
sure that the antenna is retracted and
stored.
stored. stored.
stored.
stored.
oo
oo
o
If the antenna is dirty, be sure to clean it
If the antenna is dirty, be sure to clean it If the antenna is dirty, be sure to clean it
If the antenna is dirty, be sure to clean it
If the antenna is dirty, be sure to clean it
in order to avoid an operation malfunc-
in order to avoid an operation malfunc- in order to avoid an operation malfunc-
in order to avoid an operation malfunc-
in order to avoid an operation malfunc-
tion.
tion. tion.
tion.
tion.
B870A01F