2003 Hyundai H-1 (Grand Starex) CD player

2-35
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
K220A01TB-GAT
CASSETTE TAPE PLAYER OPERATION (K220) (If installed)
CASSETTE TAPE PLAYER OPERATION (K220) (If installed) CASSETTE TAPE PLAYER OPERATION (K220) (If installed)
CASSETTE TAPE PLAYER OPERATION (K220) (If installed)
CASSETTE TAPE PLAYER OPERATION (K220) (If installed)
K220A01TB-1
1. EJECT Button3. FF/REW Button
2. Tape Slot
4. LCD

2-39
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
K240A01TB
K240C01TB-GAT
CASSETTE TAPE PLAYER OPERATION (H240, K240) (If installed)
CASSETTE TAPE PLAYER OPERATION (H240, K240) (If installed) CASSETTE TAPE PLAYER OPERATION (H240, K240) (If installed)
CASSETTE TAPE PLAYER OPERATION (H240, K240) (If installed)
CASSETTE TAPE PLAYER OPERATION (H240, K240) (If installed)
1. Tape mode and side selection Button2. Tape slot3. Tape Eject Button
4. LCD
5. DOLBY Button 6. AMS-REW Button7. Rewind (REW) Button
8. AMS-FF Button
9. Fast Forward (FF) Button

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-40 K240D01TB-GAT
1. Tape mode and side selection But-
1. Tape mode and side selection But- 1. Tape mode and side selection But-
1. Tape mode and side selection But-
1. Tape mode and side selection But-
tonton
tonton
ton
Press this button to play the tape when it is in
the cassette deck. Once the tape mode is selected, you can play the reverse side of thetape by merely depressing the button again.
2. Cassette tape loading slot
2. Cassette tape loading slot 2. Cassette tape loading slot
2. Cassette tape loading slot
2. Cassette tape loading slot
Insert the tape into the loading slot as the open
side faces the right. The player will pull the tapein and automatically begin playback even whenthe audio power is off and the ignition switch iseither in the position of "ACC"or "ON".
3. Tape Eject Button ( )
3. Tape Eject Button ( ) 3. Tape Eject Button ( )
3. Tape Eject Button ( )
3. Tape Eject Button ( )
Press this button to eject the cassette tape.
Tape will be ejected even when the ignitionswitch is in the position of "OFF".
4. LCD
4. LCD 4. LCD
4. LCD
4. LCD
LCD shows the operating conditions of the
cassette in play. It informs the driver of playingstatus, tape direction, FF or REW, MTL inmetallic tape use, and Dolby etc.
5. Dolby Button
5. Dolby Button 5. Dolby Button
5. Dolby Button
5. Dolby Button
When you play the Dolby recorded tape, press
this button to reduce the background noise. Ifyou press this button is displayed. One morepress will let the disappear from the dis-play. 6. AMS-REW Button ( )
6. AMS-REW Button ( ) 6. AMS-REW Button ( )
6. AMS-REW Button ( )
6. AMS-REW Button ( )
Press button to rewind the tape quickly andstart replay at the beginning of the currentmusic. During the AMS-REWINDING. "REW"sign blinks on the display. Press the button once more to stop REWIND- ING and start play again.
7. Rewind button ( )
7. Rewind button ( ) 7. Rewind button ( )
7. Rewind button ( )
7. Rewind button ( )
You can rewind the tape to the beginning of thetape by pressing the " " button during theplay ("Rew" is shown on the display). Tape playstarts when the " " button is pressed againduring the REW mode.
8. AMS-FF Button ( )
8. AMS-FF Button ( ) 8. AMS-FF Button ( )
8. AMS-FF Button ( )
8. AMS-FF Button ( )
Press button to fast forward the tape and startplay at the beginning of next music segment.During the AMS-FF, "FF"sign blinks on thedisplay. Press the button again to stop FF action and start play.
9. Fast Forward Button ( )
9. Fast Forward Button ( ) 9. Fast Forward Button ( )
9. Fast Forward Button ( )
9. Fast Forward Button ( )
You can fast forward the tape to the end of thetape by pressing the " " button during theplay. (Then "FF" is shown on the display). Tapeplay starts when the button is pressedagain during the ff mode.

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-44
H260B01O-AAT COMPACT DISC PLAYER OPERATION (H260) (If
COMPACT DISC PLAYER OPERATION (H260) (If COMPACT DISC PLAYER OPERATION (H260) (If
COMPACT DISC PLAYER OPERATION (H260) (If
COMPACT DISC PLAYER OPERATION (H260) (If II
II
I nstalled)
nstalled) nstalled)
nstalled)
nstalled)
H260A01O
1.Playing CD
2. FF/REW Button
3. TRACK UP/DOWN
4. SCAN Button
5. REPEAT Button
6. EJECT Button

2-45
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
B260D01O-AAT 1.1.
1.1.
1. Playing CD
Playing CD Playing CD
Playing CD
Playing CD
o Insert the CD with the label facing upward.
o Insert the CD to start CD playback, during radio operation.
o When a disc is in the CD deck, if you press the play button, the CD player will begin playing even if the radio is being used.
o The CD player can be used when the igni- tion switch is in either the "ON" or "ACC"position.
2.2.
2.2.
2. FF/REW ( / )
FF/REW ( / ) FF/REW ( / )
FF/REW ( / )
FF/REW ( / )
If you want to fast forward or reverse through
the compact disc track, push and hold in the FF( ) or REW ( ) button.
When you release the button, the compact disc
player will resume playing.
3.3.
3.3.
3.
TRACK UP/DOWN
TRACK UP/DOWN TRACK UP/DOWN
TRACK UP/DOWN
TRACK UP/DOWN
o The desired track on the disc currently be- ing played can be selected using the tracknumber.
o Press once to skip forward to the beginn- ing of the next track. Press once to skipback to the beginning of the track.
4.4.
4.4.
4. SCAN Button
SCAN Button SCAN Button
SCAN Button
SCAN Button
o Press the SCAN button to playback the first 10 seconds of each track.
o Press the SCAN button again within 10 sec. for the desired track. 5.5.
5.5.
5. REPEAT Button
REPEAT Button REPEAT Button
REPEAT Button
REPEAT Button
o To repeat the music you are listening to, press the RPT button. To cancel , pressagain.
o If you do not release RPT operation, when the track ends, it will automatically be re-played.This process will be continued until youpush the button again.
6.6.
6.6.
6.
EJECT Button
EJECT Button EJECT Button
EJECT Button
EJECT Button
When the EJECT button is pressed with theCD loaded, the CD is ejected. NOTE:
o To assure proper operation of the unit, keep the vehicle interior temperature within a normal range by using thevehicle's air conditioning or heating sys-tem.
o When replacing the fuse, replace it with a fuse having the correct capacity.
o The preset station frequencies are all erased when the car battery is discon-nected. Therefore, all data will have to beset again if this should occur.
o Do not add any oil to the rotating parts. Keep magnets, screwdrivers and othermetallic objects away from the tapemechanism and head.
o This equipment is designed to be used only in a 12 volt DC battery system withnegative ground. o This unit is made of precision parts. Do
not attempt to disassemble or adjust anyparts.
o When driving your vehicle, be sure to keep the volume of the unit set lowenough to allow you to hear sounds com-ing from the outside.
o Do not expose this equipment (including the speakers) to water or excessive mois-ture.

2-47
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
B260F01P-AAT
o To use the CD auto changer.
1. Open the sliding lid of the CD auto chang- er.
2. To eject the compact disc magazine, press the EJECT button located inside the CD auto changer.
3. Insert the discs into the magazine.
4. Push the magazine into the CD auto changer and close the sliding lid.
o The CD auto changer can be used when the ignition switch is in either the "ON" or "ACC" position.
1. CD Select Button
1. CD Select Button 1. CD Select Button
1. CD Select Button
1. CD Select Button
When the CD changer magazine contains discs,
press the "CD" button and the CD changer canbe used even if the radio is being used. TheHyundai CD changer can hold up to eight discs.The disc number will be lit, and the track num-ber, and elapsed time will be displayed.
2. DISC Select Button
2. DISC Select Button 2. DISC Select Button
2. DISC Select Button
2. DISC Select Button
To select the CD you want, push " " to
change the disc number. 3. TRACK UP/DOWN
3. TRACK UP/DOWN 3. TRACK UP/DOWN
3. TRACK UP/DOWN
3. TRACK UP/DOWN
o The desired track on the disc currently be-
ing played can be selected using the track number.
o Press once to skip forward to the begin- ning of the next track. Press once to skipback to the beginning of the track.
4. FF/REW ( / )
4. FF/REW ( / ) 4. FF/REW ( / )
4. FF/REW ( / )
4. FF/REW ( / )
If you want to fast forward or reverse through
the compact disc track, push and hold in the FF( ) or REW ( ) button.
When you release the button, the compact disc
player will resume playing.
5. REPEAT
5. REPEAT 5. REPEAT
5. REPEAT
5. REPEAT
o To repeat the music you are listening to,
press the RPT button. To cancel , press again.
o If you do not release RPT operation when the track ends, it will automatically be re-played. This process will be continued until you push the button again.
6. SCAN Button
6. SCAN Button 6. SCAN Button
6. SCAN Button
6. SCAN Button
o Press the SCAN button to playback the first
10 seconds of each track.
o Press the SCAN button again within 10 sec. for the desired track. NOTE:
o When replacing the fuse, replace it with a fuse having the correct capacity.
o This equipment is designed to be used only in a 12 volt DC battery system with negative ground.
o This unit is made of precision parts. Do not attempt to disassemble or adjust anyparts.
o When driving your vehicle, be sure to keep the volume of the unit set lowenough to allow you to hear sounds com-ing from the outside.
TUNEDISC

2-51
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
H290C01E-GAT CASSETTE TAPE PLAYER OPERATION (H280) (If
CASSETTE TAPE PLAYER OPERATION (H280) (If CASSETTE TAPE PLAYER OPERATION (H280) (If
CASSETTE TAPE PLAYER OPERATION (H280) (If
CASSETTE TAPE PLAYER OPERATION (H280) (If II
II
I nstalled)
nstalled) nstalled)
nstalled)
nstalled)
H290A01O
5. EQUALIZER Button
4. TAPE EJECT Button
2. AUTO MUSIC Select Button
3. TAPE PROGRAM Button 6. DOLBY Button
1. FF/REW Button

2-53
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
H290E01E-GAT COMPACT DISC PLAYER OPERATION (H280) (If
COMPACT DISC PLAYER OPERATION (H280) (If COMPACT DISC PLAYER OPERATION (H280) (If
COMPACT DISC PLAYER OPERATION (H280) (If
COMPACT DISC PLAYER OPERATION (H280) (If II
II
I nstalled)
nstalled) nstalled)
nstalled)
nstalled)
H290A01O
5. EQUALIZER Button
3. TRACK UP/DOWN
1. CD Select Button 4. REPEAT
2. FF/REW Button
6. CD EJELT Button
7. SCAN Button (If installed)