2003 Hyundai H-1 (Grand Starex) load capacity

2-45
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
B260D01O-AAT 1.1.
1.1.
1. Playing CD
Playing CD Playing CD
Playing CD
Playing CD
o Insert the CD with the label facing upward.
o Insert the CD to start CD playback, during radio operation.
o When a disc is in the CD deck, if you press the play button, the CD player will begin playing even if the radio is being used.
o The CD player can be used when the igni- tion switch is in either the "ON" or "ACC"position.
2.2.
2.2.
2. FF/REW ( / )
FF/REW ( / ) FF/REW ( / )
FF/REW ( / )
FF/REW ( / )
If you want to fast forward or reverse through
the compact disc track, push and hold in the FF( ) or REW ( ) button.
When you release the button, the compact disc
player will resume playing.
3.3.
3.3.
3.
TRACK UP/DOWN
TRACK UP/DOWN TRACK UP/DOWN
TRACK UP/DOWN
TRACK UP/DOWN
o The desired track on the disc currently be- ing played can be selected using the tracknumber.
o Press once to skip forward to the beginn- ing of the next track. Press once to skipback to the beginning of the track.
4.4.
4.4.
4. SCAN Button
SCAN Button SCAN Button
SCAN Button
SCAN Button
o Press the SCAN button to playback the first 10 seconds of each track.
o Press the SCAN button again within 10 sec. for the desired track. 5.5.
5.5.
5. REPEAT Button
REPEAT Button REPEAT Button
REPEAT Button
REPEAT Button
o To repeat the music you are listening to, press the RPT button. To cancel , pressagain.
o If you do not release RPT operation, when the track ends, it will automatically be re-played.This process will be continued until youpush the button again.
6.6.
6.6.
6.
EJECT Button
EJECT Button EJECT Button
EJECT Button
EJECT Button
When the EJECT button is pressed with theCD loaded, the CD is ejected. NOTE:
o To assure proper operation of the unit, keep the vehicle interior temperature within a normal range by using thevehicle's air conditioning or heating sys-tem.
o When replacing the fuse, replace it with a fuse having the correct capacity.
o The preset station frequencies are all erased when the car battery is discon-nected. Therefore, all data will have to beset again if this should occur.
o Do not add any oil to the rotating parts. Keep magnets, screwdrivers and othermetallic objects away from the tapemechanism and head.
o This equipment is designed to be used only in a 12 volt DC battery system withnegative ground. o This unit is made of precision parts. Do
not attempt to disassemble or adjust anyparts.
o When driving your vehicle, be sure to keep the volume of the unit set lowenough to allow you to hear sounds com-ing from the outside.
o Do not expose this equipment (including the speakers) to water or excessive mois-ture.

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-54 H290F01O-GAT
1.1.
1.1.
1. CD Select Button
CD Select Button CD Select Button
CD Select Button
CD Select Button
o Insert the CD with the label facing upward.
o Insert the CD to start CD playback, during radio operation or cassette tape playing.
o When a disc is in the CD deck, if you press the play button the CD player will begin playing even if the radio or cassette playeris being used.
o The CD player can be used when the igni- tion switch is in either the "ON" or "ACC"position.
2.2.
2.2.
2. FF/REW ( / )
FF/REW ( / ) FF/REW ( / )
FF/REW ( / )
FF/REW ( / )
If you want to fast forward or reverse through
the compact disc track, push and hold in the FF( ) or REW ( ) button.
When you release the button, the compact disc
player will resume playing.
3.3.
3.3.
3. TRACK UP/DOWN
TRACK UP/DOWN TRACK UP/DOWN
TRACK UP/DOWN
TRACK UP/DOWN
o The desired track on the disc currently be- ing played can be selected using the tracknumber.
o Press button once to skip forward to the beginning of the next track. Press buttononce to skip back to the beginning of thetrack. 4.4.
4.4.
4. REPEAT
REPEAT REPEAT
REPEAT
REPEAT
o To repeat the music you are listening to, press the RPT button. To cancel , pressagain.
o If you do not release RPT operation when the track ends, it will automatically be re-played. This process will be continued until you push the button again.
5.5.
5.5.
5.
EQUALIZER Button
EQUALIZER Button EQUALIZER Button
EQUALIZER Button
EQUALIZER Button
Press the EQ button to select the CLASSIC,
JAZZ, ROCK and DEFEAT MODE for the de-sired tone quality. Each press of the buttonchanges the display as follows; NOTE:
NOTE: NOTE:
NOTE:
NOTE:
oo
oo
o To assure proper operation of the unit,
To assure proper operation of the unit, To assure proper operation of the unit,
To assure proper operation of the unit,
To assure proper operation of the unit,
keep the vehicle interior temperature
keep the vehicle interior temperature keep the vehicle interior temperature
keep the vehicle interior temperature
keep the vehicle interior temperature
within a normal range by using the
within a normal range by using the within a normal range by using the
within a normal range by using the
within a normal range by using the
vehicle's air conditioning or heating sys-
vehicle's air conditioning or heating sys- vehicle's air conditioning or heating sys-
vehicle's air conditioning or heating sys-
vehicle's air conditioning or heating sys-
tem.tem.
tem.tem.
tem.
oo
oo
o When replacing the fuse, replace it with a
When replacing the fuse, replace it with a When replacing the fuse, replace it with a
When replacing the fuse, replace it with a
When replacing the fuse, replace it with a
fuse having the correct capacity.
fuse having the correct capacity. fuse having the correct capacity.
fuse having the correct capacity.
fuse having the correct capacity.
oo
oo
o The preset station frequencies are all
The preset station frequencies are all The preset station frequencies are all
The preset station frequencies are all
The preset station frequencies are all
erased when the car battery is discon-
erased when the car battery is discon- erased when the car battery is discon-
erased when the car battery is discon-
erased when the car battery is discon-
nected. Therefore, all data will have to be
nected. Therefore, all data will have to be nected. Therefore, all data will have to be
nected. Therefore, all data will have to be
nected. Therefore, all data will have to be
set again if this should occur.
set again if this should occur. set again if this should occur.
set again if this should occur.
set again if this should occur.
oo
oo
o Do not add any oil to the rotating parts.
Do not add any oil to the rotating parts. Do not add any oil to the rotating parts.
Do not add any oil to the rotating parts.
Do not add any oil to the rotating parts.
Keep magnets, screwdrivers and other
Keep magnets, screwdrivers and other Keep magnets, screwdrivers and other
Keep magnets, screwdrivers and other
Keep magnets, screwdrivers and other
metallic objects away from the tape
metallic objects away from the tape metallic objects away from the tape
metallic objects away from the tape
metallic objects away from the tape
mechanism and head.
mechanism and head. mechanism and head.
mechanism and head.
mechanism and head.
oo
oo
o This equipment is designed to be used
This equipment is designed to be used This equipment is designed to be used
This equipment is designed to be used
This equipment is designed to be used
only in a 12 volt DC battery system with
only in a 12 volt DC battery system with only in a 12 volt DC battery system with
only in a 12 volt DC battery system with
only in a 12 volt DC battery system with
negative ground.
negative ground. negative ground.
negative ground.
negative ground.
oo
oo
o This unit is made of precision parts. Do
This unit is made of precision parts. Do This unit is made of precision parts. Do
This unit is made of precision parts. Do
This unit is made of precision parts. Do
not attempt to disassemble or adjust any
not attempt to disassemble or adjust any not attempt to disassemble or adjust any
not attempt to disassemble or adjust any
not attempt to disassemble or adjust any
parts.
parts. parts.
parts.
parts.
oo
oo
o When driving your vehicle, be sure to
When driving your vehicle, be sure to When driving your vehicle, be sure to
When driving your vehicle, be sure to
When driving your vehicle, be sure to
keep the volume of the unit set low
keep the volume of the unit set low keep the volume of the unit set low
keep the volume of the unit set low
keep the volume of the unit set low
enough to allow you to hear sounds com-
enough to allow you to hear sounds com- enough to allow you to hear sounds com-
enough to allow you to hear sounds com-
enough to allow you to hear sounds com-
ing from the outside.
ing from the outside. ing from the outside.
ing from the outside.
ing from the outside.
oo
oo
o Do not expose this equipment (including
Do not expose this equipment (including Do not expose this equipment (including
Do not expose this equipment (including
Do not expose this equipment (including
the speakers and tape) to water or exces-
the speakers and tape) to water or exces- the speakers and tape) to water or exces-
the speakers and tape) to water or exces-
the speakers and tape) to water or exces-
sive moisture.
sive moisture. sive moisture.
sive moisture.
sive moisture.
CLASSIC

JAZZ
ROCK
DEFEAT

6.6.
6.6.
6.
CD EJECT Button
CD EJECT Button CD EJECT Button
CD EJECT Button
CD EJECT Button
When the button is pressed with the CD
loaded, the CD is ejected.
7.7.
7.7.
7. SCAN Button (If installed)
SCAN Button (If installed) SCAN Button (If installed)
SCAN Button (If installed)
SCAN Button (If installed)
o Press the SCAN button to playback the first 10 seconds of each track.
o Press the SCAN button again within 10 sec. for the desired track.

IN CASE OF EMERGENCY
IN CASE OF EMERGENCY IN CASE OF EMERGENCY
IN CASE OF EMERGENCY
IN CASE OF EMERGENCY
4-15
E120A01P-GATFUSES
FUSES FUSES
FUSES
FUSES
HSR4021
To prevent damage to the electrical system due to short-circuiting or overloading, each individ-ual current circuit is provided with a fuse. The fuse housing is located under the dash- board on the driver's side. E120B01P-GAT Fuse load capacity
Fuse load capacity Fuse load capacity
Fuse load capacity
Fuse load capacity
The fuse housing cover lists the names of the electrical systems and the fuse capacities. E120C01P-GAT
Spare fuse
Spare fuse Spare fuse
Spare fuse
Spare fuse
Spare fuses are contained in the fuse housing. Always use a fuse of the same capacity forreplacement.
GS40360A
CAUTION:
CAUTION: CAUTION:
CAUTION:
CAUTION:
(1)(1)
(1)(1)
(1) Do not allow the jumper cable clips to
Do not allow the jumper cable clips to Do not allow the jumper cable clips to
Do not allow the jumper cable clips to
Do not allow the jumper cable clips to
touch one another.
touch one another. touch one another.
touch one another.
touch one another.
(2)(2)
(2)(2)
(2) Do not connect the jumper cable to the
Do not connect the jumper cable to the Do not connect the jumper cable to the
Do not connect the jumper cable to the
Do not connect the jumper cable to the
negative terminal of the flat battery.
negative terminal of the flat battery. negative terminal of the flat battery.
negative terminal of the flat battery.
negative terminal of the flat battery.
The battery generates explosive gas, and
The battery generates explosive gas, and The battery generates explosive gas, and
The battery generates explosive gas, and
The battery generates explosive gas, and
a spark caused when the jumper cable is
a spark caused when the jumper cable is a spark caused when the jumper cable is
a spark caused when the jumper cable is
a spark caused when the jumper cable is
disconnected from the negative terminal
disconnected from the negative terminal disconnected from the negative terminal
disconnected from the negative terminal
disconnected from the negative terminal
could ignite this gas and cause an explo-
could ignite this gas and cause an explo- could ignite this gas and cause an explo-
could ignite this gas and cause an explo-
could ignite this gas and cause an explo-
sion.
sion. sion.
sion.
sion.
(3)(3)
(3)(3)
(3)
Be careful that the jumper cable becomes
Be careful that the jumper cable becomes Be careful that the jumper cable becomes
Be careful that the jumper cable becomes
Be careful that the jumper cable becomes
not caught in the cooling fan, etc.
not caught in the cooling fan, etc. not caught in the cooling fan, etc.
not caught in the cooling fan, etc.
not caught in the cooling fan, etc.
8. Start engine as described in "Starting the engine".
9. After the engine is started, disconnect the cables in the reverse order. E120D01P-GAT
Changing a fuse
Changing a fuse Changing a fuse
Changing a fuse
Changing a fuseGS40380A
Good
Blown
1. Before replacing a fuse, be sure to turn off the electrical item concerned.
2. Remove the fuse housing cover.
3. Referring to the fuse load capacity table, check the fuse pertaining to the problem.
4. If the fuse is blown, pull it straight out. If it is not blown, something else must be causing the problem; contact an authorizedHYUNDAI dealer to have the problemchecked.
5. Insert a new fuse of the same capacity securely into the clip.
CAUTION:
CAUTION: CAUTION:
CAUTION:
CAUTION:
(1)(1)
(1)(1)
(1) If the newly inserted fuse blows again
If the newly inserted fuse blows again If the newly inserted fuse blows again
If the newly inserted fuse blows again
If the newly inserted fuse blows again
after a short time, the cause should be
after a short time, the cause should be after a short time, the cause should be
after a short time, the cause should be
after a short time, the cause should be
diagnosed and corrected by an autho-
diagnosed and corrected by an autho- diagnosed and corrected by an autho-
diagnosed and corrected by an autho-
diagnosed and corrected by an autho-
rized HYUNDAI dealer.
rized HYUNDAI dealer. rized HYUNDAI dealer.
rized HYUNDAI dealer.
rized HYUNDAI dealer.