IN CASE OF EMERGENCY
IN CASE OF EMERGENCY IN CASE OF EMERGENCY
IN CASE OF EMERGENCY
IN CASE OF EMERGENCY
4-2 E040A02P-GAT
JACKING UP THE VEHICLE
JACKING UP THE VEHICLE JACKING UP THE VEHICLE
JACKING UP THE VEHICLE
JACKING UP THE VEHICLE
GS40050A
1. Loosen the holding nut and pull out the
handle.
GS40060A
2. Insert the opposite end of the handle, andthen tighten the holding nut.
E040A01P-1
2WD
The method for jacking up the vehicle should be remembered in order to change a tire in theevent of a puncture and in order to install tirechains.
E040A02P-GAG
4WD
After stopping the engine and applying the
parking brake on a flat level surface, also use chocks to hold the wheels.
E040A03P-GAGRR
Position the jack only at the specified points indicated in the illustration, and the use of thejack at other points could damage the vehiclebody.
GS40080A
Jack handleRelief valve
Using the jack handle, turn the relief valve clockwise until it reaches a stop.
The jack handle is stored as shown in thefigure. To assemble, follow the steps below.
