2003 Hyundai H-1 (Grand Starex) ECO mode

2-21
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
B630A02P-GAT ROOF RACK (Minibus) (If installed)
ROOF RACK (Minibus) (If installed) ROOF RACK (Minibus) (If installed)
ROOF RACK (Minibus) (If installed)
ROOF RACK (Minibus) (If installed)
C630A01P-GAG
If your Hyundai has a roof rack, you can load things on top of your vehicle. Crossrails andfixing components to adapt roof rack on yourvehicle may be obtained from an authorizedHyundai dealer. Hyundai dealers are prepared to provide high quality service that may be required.
CAUTION:
CAUTION: CAUTION:
CAUTION:
CAUTION:
oo
oo
o The following specifications are recom-
The following specifications are recom- The following specifications are recom-
The following specifications are recom-
The following specifications are recom-
mended when loading cargo or luggage.
mended when loading cargo or luggage. mended when loading cargo or luggage.
mended when loading cargo or luggage.
mended when loading cargo or luggage.
ROOF RACK
80 kg (174 lb)
oo
oo
o Loading cargo or luggage above 80 kg
Loading cargo or luggage above 80 kg Loading cargo or luggage above 80 kg
Loading cargo or luggage above 80 kg
Loading cargo or luggage above 80 kg
(174 lb) on the roof rack may damage
(174 lb) on the roof rack may damage (174 lb) on the roof rack may damage
(174 lb) on the roof rack may damage
(174 lb) on the roof rack may damage
your vehicle.
your vehicle. your vehicle.
your vehicle.
your vehicle.
When you carry large objects, never let
When you carry large objects, never let When you carry large objects, never let
When you carry large objects, never let
When you carry large objects, never let
them hang over the rear or the sides of
them hang over the rear or the sides of them hang over the rear or the sides of
them hang over the rear or the sides of
them hang over the rear or the sides of
your vehicle.
your vehicle. your vehicle.
your vehicle.
your vehicle.
GS30130A
Lever
B520A01A-AAT
DAY/NIGHT INSIDE REARVIEW MIR-
DAY/NIGHT INSIDE REARVIEW MIR- DAY/NIGHT INSIDE REARVIEW MIR-
DAY/NIGHT INSIDE REARVIEW MIR-
DAY/NIGHT INSIDE REARVIEW MIR-
ROR (If installed)
ROR (If installed) ROR (If installed)
ROR (If installed)
ROR (If installed)
Your Hyundai is equipped with a day/night
inside rearview mirror.
The "night" position is selected by flipping the
tab at the bottom of the mirror toward you. In the "night" position, the glare of headlights of cars behind you is reduced.
oo
oo
o To prevent damage or loss of cargo as
To prevent damage or loss of cargo as To prevent damage or loss of cargo as
To prevent damage or loss of cargo as
To prevent damage or loss of cargo as
you are driving, check now and then to
you are driving, check now and then to you are driving, check now and then to
you are driving, check now and then to
you are driving, check now and then to
make sure the luggage carrier and cargo
make sure the luggage carrier and cargo make sure the luggage carrier and cargo
make sure the luggage carrier and cargo
make sure the luggage carrier and cargo
are still securely fastened.
are still securely fastened. are still securely fastened.
are still securely fastened.
are still securely fastened.
oo
oo
o
Always drive your vehicle at a moderate
Always drive your vehicle at a moderate Always drive your vehicle at a moderate
Always drive your vehicle at a moderate
Always drive your vehicle at a moderate
speed.
speed. speed.
speed.
speed.
oo
oo
o To use the roof rails as a roof rack, you
To use the roof rails as a roof rack, you To use the roof rails as a roof rack, you
To use the roof rails as a roof rack, you
To use the roof rails as a roof rack, you
must fit the roof rails with two or more
must fit the roof rails with two or more must fit the roof rails with two or more
must fit the roof rails with two or more
must fit the roof rails with two or more
crossrails or equivalent.
crossrails or equivalent. crossrails or equivalent.
crossrails or equivalent.
crossrails or equivalent. C370A01P-GAT
OUTSIDE REAR VIEW MIRROR
OUTSIDE REAR VIEW MIRROR OUTSIDE REAR VIEW MIRROR
OUTSIDE REAR VIEW MIRROR
OUTSIDE REAR VIEW MIRROR
Manual Type (If installed)
Manual Type (If installed) Manual Type (If installed)
Manual Type (If installed)
Manual Type (If installed) Before driving away, always check that your mirror is positioned so you can see directlybehind you. When using the mirror, alwaysexercise caution when attempting to judge thedistance of vehicles behind you.
HSR2319

2-27
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
C680A02P-GAG
C690A01P-GAT
Dehumidified heating
Dehumidified heating Dehumidified heating
Dehumidified heating
Dehumidified heating
C690A01P-GAG
C680A01P-GAG
C680A01P-GAT
AIR CONDITIONER OPERATION
AIR CONDITIONER OPERATION AIR CONDITIONER OPERATION
AIR CONDITIONER OPERATION
AIR CONDITIONER OPERATION
(If installed)
(If installed) (If installed)
(If installed)
(If installed)
Cooling
Cooling Cooling
Cooling
Cooling
To use the air conditioner to cool interior:
o Set the side vent control to "OFF", to shut off outside air entry. o Turn on the fan control switch.
o Turn on the air conditioner switch by push-
ing in on the switch. The air conditioner indicator light should come on at the sametime.
o Set the air intake control to the "Fresh" position.
o Set the temperature control to the "Cool" position. ("Cool" provides maximum cooling. The tem- perature may be moderated by moving thecontrol toward "Warm".)
o Adjust the fan control to the desired speed. For greater cooling, turn the fan control toone of the higher speeds or temporarilyselect the "Recirc" position on the air intakecontrol.
C690A02P-GAG
For dehumidified heating:
o Turn on the fan control switch.
o Turn on the air conditioner switch by pushing in on the switch. The air conditioner indicator light should come on at the same time.
o Set the air intake control to "Fresh".
o Set the air flow control to "Face".
o Adjust the fan control to the desired speed. For more rapid action, set the fan at one of the higher speeds.
o Adjust the temperature control to provide the desired amount of warmth.

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-40 K240D01TB-GAT
1. Tape mode and side selection But-
1. Tape mode and side selection But- 1. Tape mode and side selection But-
1. Tape mode and side selection But-
1. Tape mode and side selection But-
tonton
tonton
ton
Press this button to play the tape when it is in
the cassette deck. Once the tape mode is selected, you can play the reverse side of thetape by merely depressing the button again.
2. Cassette tape loading slot
2. Cassette tape loading slot 2. Cassette tape loading slot
2. Cassette tape loading slot
2. Cassette tape loading slot
Insert the tape into the loading slot as the open
side faces the right. The player will pull the tapein and automatically begin playback even whenthe audio power is off and the ignition switch iseither in the position of "ACC"or "ON".
3. Tape Eject Button ( )
3. Tape Eject Button ( ) 3. Tape Eject Button ( )
3. Tape Eject Button ( )
3. Tape Eject Button ( )
Press this button to eject the cassette tape.
Tape will be ejected even when the ignitionswitch is in the position of "OFF".
4. LCD
4. LCD 4. LCD
4. LCD
4. LCD
LCD shows the operating conditions of the
cassette in play. It informs the driver of playingstatus, tape direction, FF or REW, MTL inmetallic tape use, and Dolby etc.
5. Dolby Button
5. Dolby Button 5. Dolby Button
5. Dolby Button
5. Dolby Button
When you play the Dolby recorded tape, press
this button to reduce the background noise. Ifyou press this button is displayed. One morepress will let the disappear from the dis-play. 6. AMS-REW Button ( )
6. AMS-REW Button ( ) 6. AMS-REW Button ( )
6. AMS-REW Button ( )
6. AMS-REW Button ( )
Press button to rewind the tape quickly andstart replay at the beginning of the currentmusic. During the AMS-REWINDING. "REW"sign blinks on the display. Press the button once more to stop REWIND- ING and start play again.
7. Rewind button ( )
7. Rewind button ( ) 7. Rewind button ( )
7. Rewind button ( )
7. Rewind button ( )
You can rewind the tape to the beginning of thetape by pressing the " " button during theplay ("Rew" is shown on the display). Tape playstarts when the " " button is pressed againduring the REW mode.
8. AMS-FF Button ( )
8. AMS-FF Button ( ) 8. AMS-FF Button ( )
8. AMS-FF Button ( )
8. AMS-FF Button ( )
Press button to fast forward the tape and startplay at the beginning of next music segment.During the AMS-FF, "FF"sign blinks on thedisplay. Press the button again to stop FF action and start play.
9. Fast Forward Button ( )
9. Fast Forward Button ( ) 9. Fast Forward Button ( )
9. Fast Forward Button ( )
9. Fast Forward Button ( )
You can fast forward the tape to the end of thetape by pressing the " " button during theplay. (Then "FF" is shown on the display). Tapeplay starts when the button is pressedagain during the ff mode.

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-42 3.3.
3.3.
3. BASS Control Knob
BASS Control Knob BASS Control Knob
BASS Control Knob
BASS Control Knob
Press to pop the knob out and turn to the left or right for the desired bass tone.
TREB (Treble Control) Knob
TREB (Treble Control) Knob TREB (Treble Control) Knob
TREB (Treble Control) Knob
TREB (Treble Control) Knob
Pull the bass control knob further out. Turn tothe left or right for the desired treble tone.
4.4.
4.4.
4.
SCAN Button
SCAN Button SCAN Button
SCAN Button
SCAN Button
When the scan button is pressed, the fre-quency will increase and the receivable sta-tions will be tuned in one after another, receiv-ing each station for 5 seconds. To stop scan-ning, press the scan button again.
5. TUNE (Manual) Select Button
5. TUNE (Manual) Select Button 5. TUNE (Manual) Select Button
5. TUNE (Manual) Select Button
5. TUNE (Manual) Select Button
Press the ( ) side or ( ) side to increase or todecrease the frequency. Press either buttonand hold down to continuously scroll. Releasebutton once the desired station is reached.
SEEK Operation (Automatic Channel
SEEK Operation (Automatic Channel SEEK Operation (Automatic Channel
SEEK Operation (Automatic Channel
SEEK Operation (Automatic Channel
Selection)
Selection) Selection)
Selection)
Selection)
Press the TUNE select button for 0.5 sec ormore, and releasing will automatically tune thenext available station with beep sound. When the ( ) side is pressed longer than 0.5 second and releasing will automatically tunethe next higher frequency and when the ( )side is pressed longer than 0.5 second andreleasing will automatically tune the next lowerfrequency. 6. BAND Selector
6. BAND Selector 6. BAND Selector
6. BAND Selector
6. BAND Selector
Pressing the button changes the AM, FM1and FM2 bands. The mode selected is dis-played on LCD.
7. PRESET STATION SELECT Button
7. PRESET STATION SELECT Button 7. PRESET STATION SELECT Button
7. PRESET STATION SELECT Button
7. PRESET STATION SELECT Button
Six (6) stations for AM, FM or FM2 respectivelycan be preset in the electronic memory circuiton this unit.
HOW TO PRESET STATIONS
HOW TO PRESET STATIONS HOW TO PRESET STATIONS
HOW TO PRESET STATIONS
HOW TO PRESET STATIONS
Six AM and twelve FM stations may be pro-grammed into the memory of the radio. Then,by simply pressing the band select button and/or one of the six station select buttons, you mayrecall any of these stations instantly. To pro-gram the stations, follow these steps:
o Press band selector to set the band for AM, FM or FM2.
o Select the desired station to be stored by seek, scan or manual tuning.
o Determine the preset station select button you wish to use to access that station.
o Press the station select button for more than two seconds. A select button indicator willshow in the display indicating which selectbutton you have depressed. The frequencydisplay will flash after it has been stored intothe memory.
H260B02E-AAT
1.1.
1.1.
1. POWER ON-OFF Control Knob
POWER ON-OFF Control Knob POWER ON-OFF Control Knob
POWER ON-OFF Control Knob
POWER ON-OFF Control Knob
The radio unit may be operated when the igni-
tion key is in the "ACC" or "ON" position. Pressthe knob to switch the power on. The LCDshows the radio frequency in the radio mode orthe CD track indicator in either the CD mode orCD AUTO CHANGER mode. To switch thepower off, press the knob again.
VOLUME Control
VOLUME Control VOLUME Control
VOLUME Control
VOLUME Control
Rotate the knob clockwise to increase the vol-
ume and turn the knob counterclockwise toreduce the volume.
BALANCE Control
BALANCE Control BALANCE Control
BALANCE Control
BALANCE Control
Pull and turn the control knob clockwise to
emphasize right speaker sound (Left speakersound will be attenuated). When the controlknob is turned counterclockwise, left speakersound will be emphasized. (Right speaker soundwill be attenuated)
2. FAD (Fader Control) Knob
2. FAD (Fader Control) Knob 2. FAD (Fader Control) Knob
2. FAD (Fader Control) Knob
2. FAD (Fader Control) Knob
Turn the control knob counterclockwise to em-
phasize front speaker sound. (Rear speakersound will be attenuated) When the controlknob is turned clockwise, rear speaker soundwill be emphasized. (Front speaker sound willbe attenuated)
FM/AM

2-49
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
H290B01P-GAT 1.1.
1.1.
1. POWER ON-OFF Control Knob
POWER ON-OFF Control Knob POWER ON-OFF Control Knob
POWER ON-OFF Control Knob
POWER ON-OFF Control Knob
The radio unit may be operated when the igni-
tion key is in the "ACC" or "ON" position. Press the button to switch the power on. The displayshows the radio frequency in the radio mode orthe tape direction indicator in the tape mode, orCD track either the CD mode or CD AUTOCHANGER mode. To switch the power off,press the button again.
VOLUME Control
VOLUME Control VOLUME Control
VOLUME Control
VOLUME Control
Rotate the knob clockwise to increase the vol-
ume and turn the knob counterclockwise toreduce the volume.
2.2.
2.2.
2.
BASS/BALANCE Control Knob
BASS/BALANCE Control Knob BASS/BALANCE Control Knob
BASS/BALANCE Control Knob
BASS/BALANCE Control Knob
BASS Control Knob
BASS Control Knob BASS Control Knob
BASS Control Knob
BASS Control Knob
Press to pop the knob out. To increase the
bass, rotate the knob clockwise, while to de-crease the bass, rotate the knob counterclock-wise.
BALANCE Control knob
BALANCE Control knob BALANCE Control knob
BALANCE Control knob
BALANCE Control knob
Further pull the popped-up knob. Rotate the
knob clockwise to emphasize right speakersound. (Left speaker sound will be attenuated)When the control knob is turned counterclock-wise, left speaker sound will be emphasized(Right speaker sound will be attenuated). 3.3.
3.3.
3. TREBLE/FAD Knob
TREBLE/FAD Knob TREBLE/FAD Knob
TREBLE/FAD Knob
TREBLE/FAD Knob
TREBLE Control Knob
TREBLE Control Knob TREBLE Control Knob
TREBLE Control Knob
TREBLE Control Knob
Press to pop the knob out and turn to the left or
right for the desired treble tone.
FAD (Fader Control) Knob (Minibus
FAD (Fader Control) Knob (Minibus FAD (Fader Control) Knob (Minibus
FAD (Fader Control) Knob (Minibus
FAD (Fader Control) Knob (Minibus
only)
only) only)
only)
only)
Further pull the popped-up knob. Turn the con-
trol knob counterclockwise to emphasize frontspeaker sound. (Rear speaker sound will beattenuated) When the control knob is turnedclockwise, rear speaker sound will be empha-sized. (Front speaker sound will be attenuated)
4.4.
4.4.
4.
TUNE (Manual) Select Button
TUNE (Manual) Select Button TUNE (Manual) Select Button
TUNE (Manual) Select Button
TUNE (Manual) Select Button
Press the ( ) side or ( ) side to increase or to
decrease the frequency. With the button helddown for 0.5 sec. or more, the stop signal(broadcasting radio wave) is ignored and chan-nel selection continues.
SEEK Operation (Automatic Channel
SEEK Operation (Automatic Channel SEEK Operation (Automatic Channel
SEEK Operation (Automatic Channel
SEEK Operation (Automatic Channel
Selection)
Selection) Selection)
Selection)
Selection)
Press the TUNE select button for 1 sec or
more, and releasing will automatically tune thenext available station with beep sound. When the ( ) side is pressed longer than 1
second and releasing will automatically tunethe next higher frequency and when the ( )side is pressed longer than 1 second and re-leasing will automatically tune the next lowerfrequency. 5.5.
5.5.
5. PRESET STATION Select Buttons
PRESET STATION Select Buttons PRESET STATION Select Buttons
PRESET STATION Select Buttons
PRESET STATION Select Buttons
Six (6) stations for AM, FM and FM2 respec-
tively can be preset in the electronic memorycircuit.
HOW TO PRESET STATIONS
HOW TO PRESET STATIONS HOW TO PRESET STATIONS
HOW TO PRESET STATIONS
HOW TO PRESET STATIONS
Six AM and twelve FM stations may be pro-
grammed into the memory of the radio. Then,by simply pressing the band select button and/or one of the six station select buttons, you mayrecall any of these stations instantly. To pro-gram the stations, follow these steps:
o Press band selector to set the band for AM, FM and FM2.
o Select the desired station to be stored by seek or manual tuning.
o Determine the preset station select button you wish to use to access that station.
o Press the station select button for more than two seconds. A select button indicator will show in the display indicating which selectbutton you have depressed. The frequencydisplay will flash after it has been stored intothe memory with beep sound. You shouldthen release the button, and proceed toprogram the next desired station. A total of18 stations can be programmed by selectingone AM and two FM station per button.
o When completed, any preset station may be recalled by selecting AM, FM or FM2 bandand the appropriate station button.

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-50 CLASSIC

JAZZ
ROCK
DEFEAT

FM/AMFM/AM
FM/AMFM/AM
FM/AM
6.6.
6.6.
6. BAND Selector
BAND Selector BAND Selector
BAND Selector
BAND Selector
Pressing the button changes the AM, FM1
and FM2 bands. The mode selected is shown on the display.
7.7.
7.7.
7. EQUALIZER Button
EQUALIZER Button EQUALIZER Button
EQUALIZER Button
EQUALIZER Button
Press the EQ button to select the CLASSIC,
JAZZ, ROCK and DEFEAT MODE for the de-sired tone quality. Each press of the buttonchanges the display as follows;
8.8.
8.8.
8. Best Station Memory Button (BSM)
Best Station Memory Button (BSM) Best Station Memory Button (BSM)
Best Station Memory Button (BSM)
Best Station Memory Button (BSM)
(If installed)
(If installed) (If installed)
(If installed)
(If installed)
When the BSM button is pressed for two sec-
onds or longer, the six channels from the high-est field intensity are selected next and storedin memory. The stations selected are stored inthe sequence frequency from the first presetkey.
SCAN Button (If installed)
SCAN Button (If installed) SCAN Button (If installed)
SCAN Button (If installed)
SCAN Button (If installed)
When the scan button is pressed, the fre-
quency will increase and the receivable sta-tions will be tuned in one after another, receiv-ing each station for 5 seconds. To stop scan-ning, press the scan button again.

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-52 H290D01O-GAT
1.1.
1.1.
1. FF/REW Button
FF/REW Button FF/REW Button
FF/REW Button
FF/REW Button
o Fast forward tape winding starts when the FF ( ) button is pressed during the PLAY or REW mode.
o Tape play starts when the FF ( ) button is pressed again during the FF mode.
o Tape rewinding starts when the REW ( ) button is pressed during the PLAY orFF mode.
o Tape play starts when the REW ( ) button pressed again during the REW mode.
2.2.
2.2.
2. AUTO MUSIC Select Button
AUTO MUSIC Select Button AUTO MUSIC Select Button
AUTO MUSIC Select Button
AUTO MUSIC Select Button
Press the button to find the starting point of
each song in a prerecorded music tape. Thequiet space between songs (must have at leasta 4 sec. gap) can be accepted by the AUTOMUSIC Select button.
o Pressing the button will play the beginn- ing of the next music segment.
o Pressing the button will start replay at the beginning of the music just listened to.
3.3.
3.3.
3.
TAPE PROGRAM Button
TAPE PROGRAM Button TAPE PROGRAM Button
TAPE PROGRAM Button
TAPE PROGRAM Button
This allows you to play the reverse side of the
tape by merely depressing the program button. An arrow will appear in the display to show tapedirection. 4.4.
4.4.
4. TAPE EJECT button
TAPE EJECT button TAPE EJECT button
TAPE EJECT button
TAPE EJECT button
o When the button is pressed with the cassette loaded, the cassette is ejected.
o When the button is pressed during the FF/REW mode, the cassette is ejected.
5.5.
5.5.
5. EQ Button
EQ Button EQ Button
EQ Button
EQ Button
Press the EQ button to select the CLASSIC,JAZZ, ROCK and DEFEAT MODE for the de-sired tone quality. Each press of the buttonchanges the display as follows;
6.6.
6.6.
6. DOLBY Button
DOLBY Button DOLBY Button
DOLBY Button
DOLBY Button
If you get background noise during tape PLAY,you can reduce this considerably by merelypressing the DOLBY button. If you want tocancel the DOLBY feature, press the buttonagain. CLASSIC

JAZZ
ROCK
DEFEAT


INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-54 H290F01O-GAT
1.1.
1.1.
1. CD Select Button
CD Select Button CD Select Button
CD Select Button
CD Select Button
o Insert the CD with the label facing upward.
o Insert the CD to start CD playback, during radio operation or cassette tape playing.
o When a disc is in the CD deck, if you press the play button the CD player will begin playing even if the radio or cassette playeris being used.
o The CD player can be used when the igni- tion switch is in either the "ON" or "ACC"position.
2.2.
2.2.
2. FF/REW ( / )
FF/REW ( / ) FF/REW ( / )
FF/REW ( / )
FF/REW ( / )
If you want to fast forward or reverse through
the compact disc track, push and hold in the FF( ) or REW ( ) button.
When you release the button, the compact disc
player will resume playing.
3.3.
3.3.
3. TRACK UP/DOWN
TRACK UP/DOWN TRACK UP/DOWN
TRACK UP/DOWN
TRACK UP/DOWN
o The desired track on the disc currently be- ing played can be selected using the tracknumber.
o Press button once to skip forward to the beginning of the next track. Press buttononce to skip back to the beginning of thetrack. 4.4.
4.4.
4. REPEAT
REPEAT REPEAT
REPEAT
REPEAT
o To repeat the music you are listening to, press the RPT button. To cancel , pressagain.
o If you do not release RPT operation when the track ends, it will automatically be re-played. This process will be continued until you push the button again.
5.5.
5.5.
5.
EQUALIZER Button
EQUALIZER Button EQUALIZER Button
EQUALIZER Button
EQUALIZER Button
Press the EQ button to select the CLASSIC,
JAZZ, ROCK and DEFEAT MODE for the de-sired tone quality. Each press of the buttonchanges the display as follows; NOTE:
NOTE: NOTE:
NOTE:
NOTE:
oo
oo
o To assure proper operation of the unit,
To assure proper operation of the unit, To assure proper operation of the unit,
To assure proper operation of the unit,
To assure proper operation of the unit,
keep the vehicle interior temperature
keep the vehicle interior temperature keep the vehicle interior temperature
keep the vehicle interior temperature
keep the vehicle interior temperature
within a normal range by using the
within a normal range by using the within a normal range by using the
within a normal range by using the
within a normal range by using the
vehicle's air conditioning or heating sys-
vehicle's air conditioning or heating sys- vehicle's air conditioning or heating sys-
vehicle's air conditioning or heating sys-
vehicle's air conditioning or heating sys-
tem.tem.
tem.tem.
tem.
oo
oo
o When replacing the fuse, replace it with a
When replacing the fuse, replace it with a When replacing the fuse, replace it with a
When replacing the fuse, replace it with a
When replacing the fuse, replace it with a
fuse having the correct capacity.
fuse having the correct capacity. fuse having the correct capacity.
fuse having the correct capacity.
fuse having the correct capacity.
oo
oo
o The preset station frequencies are all
The preset station frequencies are all The preset station frequencies are all
The preset station frequencies are all
The preset station frequencies are all
erased when the car battery is discon-
erased when the car battery is discon- erased when the car battery is discon-
erased when the car battery is discon-
erased when the car battery is discon-
nected. Therefore, all data will have to be
nected. Therefore, all data will have to be nected. Therefore, all data will have to be
nected. Therefore, all data will have to be
nected. Therefore, all data will have to be
set again if this should occur.
set again if this should occur. set again if this should occur.
set again if this should occur.
set again if this should occur.
oo
oo
o Do not add any oil to the rotating parts.
Do not add any oil to the rotating parts. Do not add any oil to the rotating parts.
Do not add any oil to the rotating parts.
Do not add any oil to the rotating parts.
Keep magnets, screwdrivers and other
Keep magnets, screwdrivers and other Keep magnets, screwdrivers and other
Keep magnets, screwdrivers and other
Keep magnets, screwdrivers and other
metallic objects away from the tape
metallic objects away from the tape metallic objects away from the tape
metallic objects away from the tape
metallic objects away from the tape
mechanism and head.
mechanism and head. mechanism and head.
mechanism and head.
mechanism and head.
oo
oo
o This equipment is designed to be used
This equipment is designed to be used This equipment is designed to be used
This equipment is designed to be used
This equipment is designed to be used
only in a 12 volt DC battery system with
only in a 12 volt DC battery system with only in a 12 volt DC battery system with
only in a 12 volt DC battery system with
only in a 12 volt DC battery system with
negative ground.
negative ground. negative ground.
negative ground.
negative ground.
oo
oo
o This unit is made of precision parts. Do
This unit is made of precision parts. Do This unit is made of precision parts. Do
This unit is made of precision parts. Do
This unit is made of precision parts. Do
not attempt to disassemble or adjust any
not attempt to disassemble or adjust any not attempt to disassemble or adjust any
not attempt to disassemble or adjust any
not attempt to disassemble or adjust any
parts.
parts. parts.
parts.
parts.
oo
oo
o When driving your vehicle, be sure to
When driving your vehicle, be sure to When driving your vehicle, be sure to
When driving your vehicle, be sure to
When driving your vehicle, be sure to
keep the volume of the unit set low
keep the volume of the unit set low keep the volume of the unit set low
keep the volume of the unit set low
keep the volume of the unit set low
enough to allow you to hear sounds com-
enough to allow you to hear sounds com- enough to allow you to hear sounds com-
enough to allow you to hear sounds com-
enough to allow you to hear sounds com-
ing from the outside.
ing from the outside. ing from the outside.
ing from the outside.
ing from the outside.
oo
oo
o Do not expose this equipment (including
Do not expose this equipment (including Do not expose this equipment (including
Do not expose this equipment (including
Do not expose this equipment (including
the speakers and tape) to water or exces-
the speakers and tape) to water or exces- the speakers and tape) to water or exces-
the speakers and tape) to water or exces-
the speakers and tape) to water or exces-
sive moisture.
sive moisture. sive moisture.
sive moisture.
sive moisture.
CLASSIC

JAZZ
ROCK
DEFEAT

6.6.
6.6.
6.
CD EJECT Button
CD EJECT Button CD EJECT Button
CD EJECT Button
CD EJECT Button
When the button is pressed with the CD
loaded, the CD is ejected.
7.7.
7.7.
7. SCAN Button (If installed)
SCAN Button (If installed) SCAN Button (If installed)
SCAN Button (If installed)
SCAN Button (If installed)
o Press the SCAN button to playback the first 10 seconds of each track.
o Press the SCAN button again within 10 sec. for the desired track.