2003 Hyundai H-1 (Grand Starex) ignition

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-2
C020A02P-1
1. Side air vent
2. Multi-function light switch
3. Horn/Driver's Side Airbag (If installed)
4. Windshield wiper/washer switch (If installed)
5. Hazard warning switch
6. Front fog light switch (If installed)
7. Rear fog light switch (If installed)
8. Outside rearview mirror heater switch (If installed) 9. Center air vent louver
10. Glove box
11. Hood release lever
12. Headlamp leveling device switch (If installed)
13. Choke knob
14. Steering wheel tilt lever (If installed)
15. Ignition switch 16. Heater/air conditioner control panel
17. Cigarette lighter
18. Air conditioner switch (If installed)
19. Ashtray
20. Audio system (If installed)
21. Drink holder
22. Digital clock (If installed)CAUTION:
CAUTION: CAUTION:
CAUTION:
CAUTION:
When installing the container of liquid air
When installing the container of liquid air When installing the container of liquid air
When installing the container of liquid air
When installing the container of liquid air
refresher inside a vehicle, do not place it
refresher inside a vehicle, do not place it refresher inside a vehicle, do not place it
refresher inside a vehicle, do not place it
refresher inside a vehicle, do not place it
near the instrument cluster nor on the crash
near the instrument cluster nor on the crash near the instrument cluster nor on the crash
near the instrument cluster nor on the crash
near the instrument cluster nor on the crash
pad surface. If there is any leakage from the
pad surface. If there is any leakage from the pad surface. If there is any leakage from the
pad surface. If there is any leakage from the
pad surface. If there is any leakage from the
air refresher onto these areas (Instrument
air refresher onto these areas (Instrument air refresher onto these areas (Instrument
air refresher onto these areas (Instrument
air refresher onto these areas (Instrument
cluster, crash pad or air ventilator), it may
cluster, crash pad or air ventilator), it may cluster, crash pad or air ventilator), it may
cluster, crash pad or air ventilator), it may
cluster, crash pad or air ventilator), it may
damage these parts. If the liquid from air
damage these parts. If the liquid from air damage these parts. If the liquid from air
damage these parts. If the liquid from air
damage these parts. If the liquid from air
refresher does leak onto these areas, wash
refresher does leak onto these areas, wash refresher does leak onto these areas, wash
refresher does leak onto these areas, wash
refresher does leak onto these areas, wash
them with water immediately.
them with water immediately. them with water immediately.
them with water immediately.
them with water immediately.
11 39
5 1 0
12 4 6 9 78
C020B01P-GAT
POSITIONS OF SWITCHES AND LEVERS (T
POSITIONS OF SWITCHES AND LEVERS (T POSITIONS OF SWITCHES AND LEVERS (T
POSITIONS OF SWITCHES AND LEVERS (T
POSITIONS OF SWITCHES AND LEVERS (T ruck)
ruck) ruck)
ruck)
ruck)
13
12 14 16 15 17 18 19 20 21 22

2-5
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
C040A01P-GAT
SPEEDOMETER
SPEEDOMETER SPEEDOMETER
SPEEDOMETER
SPEEDOMETER
The speedometer indicates the vehicle's speed
in kilometers per hour (km/h) or miles per hour (mph).
1. Odometer
2. Tripmeter
3. Tripmeter reset button C050A01P-GATODOMETER
ODOMETER ODOMETER
ODOMETER
ODOMETER
The odometer indicates the total distance the
vehicle has travelled.
C060A01P-GATTRIPMETER AND RESET BUTTON
TRIPMETER AND RESET BUTTON TRIPMETER AND RESET BUTTON
TRIPMETER AND RESET BUTTON
TRIPMETER AND RESET BUTTON
The tripmeter indicates the distance travelled
during a particular trip or period. Press the reset button to return the tripmeter
indication to zero. C070A01P-GAT
TACHOMETER (If installed)
TACHOMETER (If installed) TACHOMETER (If installed)
TACHOMETER (If installed)
TACHOMETER (If installed)
C070A01P-1
The tachometer indicates the engine
speed(rpm). The tachometer can help you ob- tain more economical driving and also warnsyou of excessive engine speeds. During travel,watch the tachometer to be sure that the en-gine speed indication does not rise to the redzone (range of the excessive engine rpm).C080A01P-1
C080A01P-GAT
FUEL GAUGE
FUEL GAUGE FUEL GAUGE
FUEL GAUGE
FUEL GAUGE
The fuel gauge indicates the fuel level in the
fuel tank regardless of the ignition switch posi- tion.
F : Full
E : EmptyC040A01P-1
1
3
2

2-7
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
The thermometer displays the temperatures
inside and outside the vehicle when the ignition switch is at "ACC" or "ON".
1. Temperature out side the vehicle
2. Temperature inside vehicle NOTE:
NOTE: NOTE:
NOTE:
NOTE:
oo
oo
o The external temperature displayed may
The external temperature displayed may The external temperature displayed may
The external temperature displayed may
The external temperature displayed may
differ from the actual temperature on ac-
differ from the actual temperature on ac- differ from the actual temperature on ac-
differ from the actual temperature on ac-
differ from the actual temperature on ac-
count of surrounding conditions, driving
count of surrounding conditions, driving count of surrounding conditions, driving
count of surrounding conditions, driving
count of surrounding conditions, driving
conditions, etc.
conditions, etc. conditions, etc.
conditions, etc.
conditions, etc.
oo
oo
o
Temperature inside or outside the vehi-
Temperature inside or outside the vehi- Temperature inside or outside the vehi-
Temperature inside or outside the vehi-
Temperature inside or outside the vehi-
cle that are below -30°C or over 70°C will
cle that are below -30°C or over 70°C will cle that are below -30°C or over 70°C will
cle that are below -30°C or over 70°C will
cle that are below -30°C or over 70°C will
result in error message being displayed
result in error message being displayed result in error message being displayed
result in error message being displayed
result in error message being displayed
(-E°C, E°C).
(-E°C, E°C). (-E°C, E°C).
(-E°C, E°C).
(-E°C, E°C).
C120A01P-GAG
C120A01P-GAT
ALTIMETER (If installed)
ALTIMETER (If installed) ALTIMETER (If installed)
ALTIMETER (If installed)
ALTIMETER (If installed)
C110A01P-GAT
THERMOMETER (If installed)
THERMOMETER (If installed) THERMOMETER (If installed)
THERMOMETER (If installed)
THERMOMETER (If installed)
C110A01P-GAG
Before driving the vehicle, set the pointer to 0
on the dial by turning the adjusting knob. The meter will indicate the height at the destination.

2-9
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
C130B01P-GAT DOOR-AJAR WARNING
DOOR-AJAR WARNING DOOR-AJAR WARNING
DOOR-AJAR WARNING
DOOR-AJAR WARNING
LAMP-RED
LAMP-RED LAMP-RED
LAMP-RED
LAMP-RED
This lamp illuminates and the warning chime
will sound at the same time when a door is opened or incompletely closed.
C130F01P-GAT TURN-SIGNAL INDICATION
TURN-SIGNAL INDICATION TURN-SIGNAL INDICATION
TURN-SIGNAL INDICATION
TURN-SIGNAL INDICATION
LAMPS-GREEN
LAMPS-GREEN LAMPS-GREEN
LAMPS-GREEN
LAMPS-GREEN
These indication lamps blink on and off when a
turn-signal lamp is blinking. If the blinking is too short, the cause may be a faulty turn-signallamp connection or a blown lamp bulb.
C130G01P-GAT HIGH-BEAM INDICATION
HIGH-BEAM INDICATION HIGH-BEAM INDICATION
HIGH-BEAM INDICATION
HIGH-BEAM INDICATION
LAMP-BLUE
LAMP-BLUE LAMP-BLUE
LAMP-BLUE
LAMP-BLUE
This indication lamp illuminates when the high
beams are on.
C130H01P-GAT FUEL FILTER WARNING
FUEL FILTER WARNING FUEL FILTER WARNING
FUEL FILTER WARNING
FUEL FILTER WARNING
LAMP-RED
LAMP-RED LAMP-RED
LAMP-RED
LAMP-RED
This lamp illuminates when the ignition switch
is set to the "ON" position and goes off after the engine has started. If it lights up while theengine is running, it indicates that water hasaccumulated inside the fuel filter. If this hap-pens, remove the water from the fuel filter.
(Refer to "In case of emergency")
C130I01P-GAT OVERDRIVE/OFF
OVERDRIVE/OFF OVERDRIVE/OFF
OVERDRIVE/OFF
OVERDRIVE/OFF
INDICATOR (If installed)
INDICATOR (If installed) INDICATOR (If installed)
INDICATOR (If installed)
INDICATOR (If installed)
When the overdrive switch is turned on and 4th
gear is engaged, the overdrive off indicator will go out. This amber indicator will be illuminatedwhen the overdrive switch is turned off.
C130J01P-GAT BRAKE WARNING AND
BRAKE WARNING AND BRAKE WARNING AND
BRAKE WARNING AND
BRAKE WARNING AND
PARKING BRAKE INDICATION
PARKING BRAKE INDICATION PARKING BRAKE INDICATION
PARKING BRAKE INDICATION
PARKING BRAKE INDICATION
LAMP-RED
LAMP-RED LAMP-RED
LAMP-RED
LAMP-RED
With the ignition switch at the "ON" position,
the brake warning lamp illuminates under the following conditions:
1. When the brake fluid level in the reservoir falls to a low level.
2. If a malfunction develops in the brake servo system.
If the lamp illuminates, stop the vehicle immedi-
ately and call the nearest authorized HYUNDAI dealer.
C130C01P-GAT
OIL PRESSURE WARNING
OIL PRESSURE WARNING OIL PRESSURE WARNING
OIL PRESSURE WARNING
OIL PRESSURE WARNING
LAMP-RED
LAMP-RED LAMP-RED
LAMP-RED
LAMP-RED
This lamp illuminates when the ignition switch
is set to the "ON" position and goes off after theengine has started. If it lights up while theengine is running, the engine must be stoppedat once. Contact the nearest authorizedHYUNDAI dealer.
C130D01P-GAT LOW FUEL WARNING
LOW FUEL WARNING LOW FUEL WARNING
LOW FUEL WARNING
LOW FUEL WARNING
LAMP-AMBER
LAMP-AMBER LAMP-AMBER
LAMP-AMBER
LAMP-AMBER
This lamp illuminates when the fuel level in the
fuel tank falls to a low level. If it illuminates, the fuel should be added soon.
C130E01P-GAT CHARGE WARNING
CHARGE WARNING CHARGE WARNING
CHARGE WARNING
CHARGE WARNING
LAMP-RED
LAMP-RED LAMP-RED
LAMP-RED
LAMP-RED
This lamp illuminates when the ignition switch
is set to the "ON" position and goes off after the engine has started. If it lights up while theengine is running, there is a problem in thecharging system. Check to see if the V-belt isbroken, and then contact the nearest autho-rized HYUNDAI dealer.
C130L01P-GAT
DIESEL PREHEAT
DIESEL PREHEAT DIESEL PREHEAT
DIESEL PREHEAT
DIESEL PREHEAT
INDICATION LIGHT-AMBER
INDICATION LIGHT-AMBER INDICATION LIGHT-AMBER
INDICATION LIGHT-AMBER
INDICATION LIGHT-AMBER
The indication light illuminates amber when the
ignition switch is placed at the "ON" position. The engine can be started after the preheatindication light goes off. The illuminating timevaries with the water temperature.
Water temperature
(°C)
Below -30 -20
0
20 40 Illuminating time
(sec)
151032 1

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-10 C130P01P-GAT
A/T (AUTOMATIC TRANSMIS-
A/T (AUTOMATIC TRANSMIS- A/T (AUTOMATIC TRANSMIS-
A/T (AUTOMATIC TRANSMIS-
A/T (AUTOMATIC TRANSMIS-
SION) OIL TEMPERATURE
SION) OIL TEMPERATURE SION) OIL TEMPERATURE
SION) OIL TEMPERATURE
SION) OIL TEMPERATURE
WARNING LIGHT
WARNING LIGHT WARNING LIGHT
WARNING LIGHT
WARNING LIGHT
(If installed)
(If installed) (If installed)
(If installed)
(If installed)
The A/T oil temperature warning light comes on when the automatic transmission oil tempera-ture goes up to the temperature that may resultin serious damage of automatic transmission. If the A/T oil temperature warning light comes on while driving, park your vehicle in at a safeplace as soon as possible and with the selectorlever is shifted into "P" position, and allow theengine to idle until the warning light goes off.And when the warning light goes off, the vehiclecan be driven normally. If the warning light doesn't go off or it lights up frequently, have the vehicle checked by yourHyundai dealer.
A/TA/T
A/TA/T
A/T
TEMPTEMP
TEMPTEMP
TEMP
NOTE:
NOTE: NOTE:
NOTE:
NOTE:
If the engine were not started within 10
If the engine were not started within 10 If the engine were not started within 10
If the engine were not started within 10
If the engine were not started within 10 seconds after the preheating is completed,
seconds after the preheating is completed, seconds after the preheating is completed,
seconds after the preheating is completed,
seconds after the preheating is completed,
turn the ignition key once more to the
turn the ignition key once more to the turn the ignition key once more to the
turn the ignition key once more to the
turn the ignition key once more to the
"LOCK" position, and then to the "ON" po-
"LOCK" position, and then to the "ON" po- "LOCK" position, and then to the "ON" po-
"LOCK" position, and then to the "ON" po-
"LOCK" position, and then to the "ON" po-
sition, in order to preheat again.
sition, in order to preheat again. sition, in order to preheat again.
sition, in order to preheat again.
sition, in order to preheat again. B260E02A-GAT
SEAT BELT REMINDER LIGHT
SEAT BELT REMINDER LIGHT SEAT BELT REMINDER LIGHT
SEAT BELT REMINDER LIGHT
SEAT BELT REMINDER LIGHT
(If installed)
(If installed) (If installed)
(If installed)
(If installed)
The seat belt reminder light comes on until your seat belt is fastened when the ignition key isturned from the "OFF" position to "ON" or"START". C130O01P-GAT
ENGINE WARNING LIGHT
ENGINE WARNING LIGHT ENGINE WARNING LIGHT
ENGINE WARNING LIGHT
ENGINE WARNING LIGHT
(If installed)
(If installed) (If installed)
(If installed)
(If installed)
This light illuminates when there is a malfunc-
tion of an exhaust gas related component, andthe system is not functioning properly so thatthe exhaust gas regulation values are not satis-fied. This light will also illuminate when theignition key is turned to the "ON" position, andthen it will go out in a few seconds. If it illumi-nates while driving, or does not illuminate whenthe ignition key is turned to the "ON" position,take your car to your nearest authorized Hyundaidealer and have the system checked.
B260B01S-GAT SRS (AIRBAG) SERVICE
SRS (AIRBAG) SERVICE SRS (AIRBAG) SERVICE
SRS (AIRBAG) SERVICE
SRS (AIRBAG) SERVICE
REMINDER INDICATOR
REMINDER INDICATOR REMINDER INDICATOR
REMINDER INDICATOR
REMINDER INDICATOR (SRI)
(SRI) (SRI)
(SRI)
(SRI)
(If installed)
(If installed) (If installed)
(If installed)
(If installed)
The SRS service reminder indicator (SRI)
comes on and flashes for about 6 secondsafter the ignition key is turned to the "ON"
position or after the engine is started, afterwhich it will go out.
This light also comes on when the SRS is not
working properly. If the SRI does not come on,or continuously remains on after flashing forabout 6 seconds when you turned the ignition
key to the "ON" position or started the engine,or if it comes on while driving, have the SRSinspected by an authorized Hyundai Dealer.
C130N01P-GAT
ANTI-LOCK BRAKE WARNING
ANTI-LOCK BRAKE WARNING ANTI-LOCK BRAKE WARNING
ANTI-LOCK BRAKE WARNING
ANTI-LOCK BRAKE WARNING
LIGHT (If installed)
LIGHT (If installed) LIGHT (If installed)
LIGHT (If installed)
LIGHT (If installed)
When the key is turned to the "ON" position, the
ABS light will come on and then go off in a fewseconds. If the ABS light remains on, comes on while
driving, or does not come on when the key isturned to the "ON" position, this indicates thatthere may be a problem with the ABS.
If this occurs, have your vehicle checked by
your Hyundai dealer as soon as possible. Thenormal braking system will still be operational,but without the assistance of the anti-lock brakesystem.
AIRAIR
AIRAIR
AIR
BAGBAG
BAGBAG
BAG
B270B02O-GATPARKING START WARNING SOUND
PARKING START WARNING SOUND PARKING START WARNING SOUND
PARKING START WARNING SOUND
PARKING START WARNING SOUND
(If installed)
(If installed) (If installed)
(If installed)
(If installed)
If the vehicle driven at over 10km/h(6mph) more 2~3 seconds, the warning chime will soundcontinuously when the parking brake engaged.

2-11
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
C150A01P-GATTURN SIGNAL SWITCH
TURN SIGNAL SWITCH TURN SIGNAL SWITCH
TURN SIGNAL SWITCH
TURN SIGNAL SWITCH
C140A01P-GAT
MULTI-FUNCTION LIGHT SWITCH
MULTI-FUNCTION LIGHT SWITCH MULTI-FUNCTION LIGHT SWITCH
MULTI-FUNCTION LIGHT SWITCH
MULTI-FUNCTION LIGHT SWITCH
Pulling down on the lever causes the turn
signals on the left side of the car to blink. Pushing upward on the lever causes the turnsignals on the right side of the car to blink. Asthe turn is completed, the lever will automati-cally return to the center position and turn offthe turn signals at the same time. If either turnsignal indicator light blinks more rapidly thanusual, goes on but does not blink, or does notgo on at all, there is a malfunction in thesystem. Check for a burned-out fuse or bulb orsee your Hyundai dealer.
Rotate the switch to turn on the lights.
1. Lights off
2. Position, tail, licence-plate, and instrument panel lamps on
3. Headlights on To operate the headlights, turn the barrel onthe end of the multifunction switch.
Parking light auto cut (If installed)
Parking light auto cut (If installed) Parking light auto cut (If installed)
Parking light auto cut (If installed)
Parking light auto cut (If installed)
If you do not turn the parking lights "OFF" after
driving, the parking light will automatically shut"OFF" when the driver's door is opened.
To turn them "ON" again you must simply turn
the ignition key to the "ON" position. C160A01P-GAT
HIGH-BEAM SWITCH
HIGH-BEAM SWITCH HIGH-BEAM SWITCH
HIGH-BEAM SWITCH
HIGH-BEAM SWITCH
To turn on the headlight high beams, push the
lever forward (away from you). The High BeamIndicator Light will come on at the same time.For low beams, pull the lever back toward you.
C170A01P-GATPASSING SWITCH
PASSING SWITCH PASSING SWITCH
PASSING SWITCH
PASSING SWITCH
HSR2114HSR2113HSR2112
1 2
3
HSR2115

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-12 The headlights will go on when the lever is
pulled toward you and will go off when it is released.
The headlights can be flashed even though the
headlight switch is in the "OFF" position.
C180A01P-GATWINDSHIELD WIPER AND WASHER
WINDSHIELD WIPER AND WASHER WINDSHIELD WIPER AND WASHER
WINDSHIELD WIPER AND WASHER
WINDSHIELD WIPER AND WASHER
SWITCH
SWITCH SWITCH
SWITCH
SWITCH
C180A01P-1 1
2
3
4
The windshield wiper and washer switch can
be operated with the ignition switch at the "ON" or "START position. Move the switch to operate the windshield
wipers or spray the washer fluid.
Windshield wipers
Windshield wipers Windshield wipers
Windshield wipers
Windshield wipers
1. Off
2. Intermittent wiper operation To use the intermittent wiper feature, place the wiper switch in the "INT" position. Withthe switch in this position, the interval be- tween wipers can be varied from 2 to 10seconds by turning the Interval AdjusterSwitch.
3. Low-Speed operation
4. High-Speed operation
NOTE:
NOTE: NOTE:
NOTE:
NOTE:
(1)(1)
(1)(1)
(1) Before operating the wipers in cold
Before operating the wipers in cold Before operating the wipers in cold
Before operating the wipers in cold
Before operating the wipers in cold
weather, check to be sure that the wiper
weather, check to be sure that the wiper weather, check to be sure that the wiper
weather, check to be sure that the wiper
weather, check to be sure that the wiper
blades are not frozen to the windshield.
blades are not frozen to the windshield. blades are not frozen to the windshield.
blades are not frozen to the windshield.
blades are not frozen to the windshield.
Attempting to operate the wipers while
Attempting to operate the wipers while Attempting to operate the wipers while
Attempting to operate the wipers while
Attempting to operate the wipers while
the blades are frozen to the windshield
the blades are frozen to the windshield the blades are frozen to the windshield
the blades are frozen to the windshield
the blades are frozen to the windshield
could cause the motor to burn out.
could cause the motor to burn out. could cause the motor to burn out.
could cause the motor to burn out.
could cause the motor to burn out.
(2)(2)
(2)(2)
(2) If the wipers stop during operation be-
If the wipers stop during operation be- If the wipers stop during operation be-
If the wipers stop during operation be-
If the wipers stop during operation be-
cause of ice or some other obstruction
cause of ice or some other obstruction cause of ice or some other obstruction
cause of ice or some other obstruction
cause of ice or some other obstruction
on the windshield, the wiper motor could
on the windshield, the wiper motor could on the windshield, the wiper motor could
on the windshield, the wiper motor could
on the windshield, the wiper motor could
burn out even if the wiper switch is turned
burn out even if the wiper switch is turned burn out even if the wiper switch is turned
burn out even if the wiper switch is turned
burn out even if the wiper switch is turned
off. If this occurs, promptly stop the ve-
off. If this occurs, promptly stop the ve- off. If this occurs, promptly stop the ve-
off. If this occurs, promptly stop the ve-
off. If this occurs, promptly stop the ve-
hicle, turn off the ignition switch, and
hicle, turn off the ignition switch, and hicle, turn off the ignition switch, and
hicle, turn off the ignition switch, and
hicle, turn off the ignition switch, and
clean the windshield to allow proper wiper
clean the windshield to allow proper wiper clean the windshield to allow proper wiper
clean the windshield to allow proper wiper
clean the windshield to allow proper wiper
operation.
operation. operation.
operation.
operation.
(3)(3)
(3)(3)
(3) Do not use the wipers when the wind-
Do not use the wipers when the wind- Do not use the wipers when the wind-
Do not use the wipers when the wind-
Do not use the wipers when the wind-
shield is dry:doing so could scratch the
shield is dry:doing so could scratch the shield is dry:doing so could scratch the
shield is dry:doing so could scratch the
shield is dry:doing so could scratch the
windshield and wear the blades prema-
windshield and wear the blades prema- windshield and wear the blades prema-
windshield and wear the blades prema-
windshield and wear the blades prema-
turely.
turely. turely.
turely.
turely. C180B01P-GAT
Windshield Washer
Windshield Washer Windshield Washer
Windshield Washer
Windshield Washer
C180B01P-1
The washer fluid will be sprayed onto the wind- shield by moving the lever in the direction of thearrow, that is, toward you.The wipers operate automatically while thewasher fluid is being sprayed. Avoid using the washer continuously for more than 20 seconds. Do not operate the washer when the fluid reservoir is empty.

2-13
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
C190A01P-GAT
TAILGATE WIPER AND WASHER
TAILGATE WIPER AND WASHER TAILGATE WIPER AND WASHER
TAILGATE WIPER AND WASHER
TAILGATE WIPER AND WASHER
SWITCH (Minibus, Van)
SWITCH (Minibus, Van) SWITCH (Minibus, Van)
SWITCH (Minibus, Van)
SWITCH (Minibus, Van)
C190A01P-1
1. When the point indicates the , the rear window wiper starts to operate continuously after the washer fluid sprays onto the rearwindow.
2. When the point indicates the , the rear window wiper starts to operate continuous-ly.
3. OFF
4. The washer fluid will be sprayed onto the windshield by indicating the point onto the . The wiper operates automatically whilethe washer fluid is being sprayed.3 4
2
1
To use the intermittent wiper feature, place the
wiper switch in the "INT" position. With the switch in this position, the interval betweenwipes can be varied from approximately 1 to 18seconds by turning the interval adjuster barrel. B350C01O-AAT
Adjustable Intermittent Wiper
Adjustable Intermittent Wiper Adjustable Intermittent Wiper
Adjustable Intermittent Wiper
Adjustable Intermittent Wiper
Operation (If installed)
Operation (If installed) Operation (If installed)
Operation (If installed)
Operation (If installed)
C180A01P
NOTE:
NOTE: NOTE:
NOTE:
NOTE:
(1)(1)
(1)(1)
(1)
Before operating the wiper in cold
Before operating the wiper in cold Before operating the wiper in cold
Before operating the wiper in cold
Before operating the wiper in cold
weather, check to be sure that the wiper
weather, check to be sure that the wiper weather, check to be sure that the wiper
weather, check to be sure that the wiper
weather, check to be sure that the wiper
blade is not frozen to the rear window.
blade is not frozen to the rear window. blade is not frozen to the rear window.
blade is not frozen to the rear window.
blade is not frozen to the rear window.
Attempting to operate the wiper while
Attempting to operate the wiper while Attempting to operate the wiper while
Attempting to operate the wiper while
Attempting to operate the wiper while
the blade is frozen to the rear window
the blade is frozen to the rear window the blade is frozen to the rear window
the blade is frozen to the rear window
the blade is frozen to the rear window
could cause the motor to burn out.
could cause the motor to burn out. could cause the motor to burn out.
could cause the motor to burn out.
could cause the motor to burn out.
(2)(2)
(2)(2)
(2) If the wiper stops during operation be-
If the wiper stops during operation be- If the wiper stops during operation be-
If the wiper stops during operation be-
If the wiper stops during operation be-
cause of ice or some other obstruction
cause of ice or some other obstruction cause of ice or some other obstruction
cause of ice or some other obstruction
cause of ice or some other obstruction
on the rear window, the wiper motor
on the rear window, the wiper motor on the rear window, the wiper motor
on the rear window, the wiper motor
on the rear window, the wiper motor
could burn out even if the wiper switch is
could burn out even if the wiper switch is could burn out even if the wiper switch is
could burn out even if the wiper switch is
could burn out even if the wiper switch is
turned off. If this occurs, promptly stop
turned off. If this occurs, promptly stop turned off. If this occurs, promptly stop
turned off. If this occurs, promptly stop
turned off. If this occurs, promptly stop
the vehicle, turn off the ignition switch,
the vehicle, turn off the ignition switch, the vehicle, turn off the ignition switch,
the vehicle, turn off the ignition switch,
the vehicle, turn off the ignition switch,
and clean the rear window to allow prop-
and clean the rear window to allow prop- and clean the rear window to allow prop-
and clean the rear window to allow prop-
and clean the rear window to allow prop-
er wiper operation.
er wiper operation. er wiper operation.
er wiper operation.
er wiper operation.
(3)(3)
(3)(3)
(3) Do not use the wiper when the rear win-
Do not use the wiper when the rear win- Do not use the wiper when the rear win-
Do not use the wiper when the rear win-
Do not use the wiper when the rear win-
dow is dry; doing so could scratch the
dow is dry; doing so could scratch the dow is dry; doing so could scratch the
dow is dry; doing so could scratch the
dow is dry; doing so could scratch the
rear window and wear the blade prema-
rear window and wear the blade prema- rear window and wear the blade prema-
rear window and wear the blade prema-
rear window and wear the blade prema-
turely.
turely. turely.
turely.
turely.
B340F01A-GAT Daytime Running Lights (If installed)
Daytime Running Lights (If installed) Daytime Running Lights (If installed)
Daytime Running Lights (If installed)
Daytime Running Lights (If installed)
Your Hyundai is equipped with daytime running
lights. The daytime running lights are used to improve visibility for oncoming traffic. Your ve-
hicle daytime running lights are designed toremain on continuously when the engine isoperating even though the headlight switch is inthe "OFF" position. However, the daytime run-
ning lights will be off while the parking brake isapplied.