2003 FORD MUSTANG manual transmission

[x] Cancel search: manual transmission

Page 2833 of 4378

FORD MUSTANG 2003  Workshop Manual 28. Install the countershaft. 
29. Clean the mating surfaces of the transmission main case and the clutch housing. Apply a bead 
of silicone rubber to the sealing surface on the clutch housing then in

Page 2839 of 4378

FORD MUSTANG 2003  Workshop Manual 47. Install a new OSS sensor tone wheel retaining ring. 
48. Install the fifth/reverse gear lockout. 
49. Install the bolt. 
50. Clean the mating surfaces of the transmission main case and the extensi

Page 2840 of 4378

FORD MUSTANG 2003  Workshop Manual 52. Install the shift spring and bracket. 
53. Install a new split pin in the gear shift off-
set lever. 
�z The split pin should be flush in the gear shift off- set lever. 
54. Seat the extension hou

Page 2841 of 4378

FORD MUSTANG 2003  Workshop Manual 56. Install the shipping seal. 
57. Rotate the transmission to a horizontal position. 
58. Clean the mating surfaces of the shift cover opening surface and the shift cover. Apply a bead 
of silicone r

Page 2842 of 4378

FORD MUSTANG 2003  Workshop Manual shaft guide tube must be cleaned and lubricated. 
Install the clutch release hub and bearing and the clutch release lever. For additional 
information, refer to Section 308-
01. 
61. Fill the transmis

Page 2843 of 4378

FORD MUSTANG 2003  Workshop Manual INSTALLATION 
Transmission 
1. NOTE:  Before installing the transmission, the ball stud, clutch release lever and the input shaft 
must be cleaned and lubricated. Use Motorcraft Premium Long-Life Grea

Page 2844 of 4378

FORD MUSTANG 2003  Workshop Manual SPECIFICATIONS 
SECTION 308-
03C: Manual Transaxle/Transmission — T56 2003 Mustang Workshop Manual  General Specifications 
Item  Specification 
Lubricants and Sealants 
Premium Long-
Life Grease 
X

Page 2846 of 4378

FORD MUSTANG 2003  Workshop Manual DESCRIPTION AND OPERATION 
Manual Transmission 
The T56 six-
speed manual transmission features the following: 
�z six forward speeds and one reverse speed. 
�z forward gears are synchronized and heli