2003 FORD MUSTANG manual transmission

[x] Cancel search: manual transmission

Page 2780 of 4378

FORD MUSTANG 2003  Workshop Manual 21. Lower the transmission and remove the five bolts.  Klj .  5 ba
  52003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2308/S3B~us~en~ ...

Page 2781 of 4378

FORD MUSTANG 2003  Workshop Manual DISASSEMBLY 
Transmission 
Disassembly 
NOTE: 
During disassembly, if any roll pins, retaining rings or bearings are removed, install new 
components. Install bearings and bearing cups as a set. 
1. R

Page 2782 of 4378

FORD MUSTANG 2003  Workshop Manual 4.
NOTE:  Position a drain pan under the transmission. 
Remove the case plug, then rotate the transmission to a horizontal position. 
5. Using the special tools, remove the extension housing fluid sea

Page 2784 of 4378

FORD MUSTANG 2003  Workshop Manual 10. Remove the 12 bolts. 
11. Using a flat-
blade screwdriver, separate the extension housing, then remove the gearshift offset 
lever from the transmission case. 
�zRemove and discard the split pin f

Page 2790 of 4378

FORD MUSTANG 2003  Workshop Manual 33.
 CAUTION: Do not remove all the bolts while in the horizontal position. 
Remove the bolts.  �zRotate the transmission to a horizontal position. Remove 12 bolts, leaving two opposing 
bolts in. Rot

Page 2796 of 4378

FORD MUSTANG 2003  Workshop Manual DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES 
Input Shaft and Bearing 
Disassembly and Assembly 
1. Disassemble the input shaft.  1. Remove the third/fourth synchronizer blocking ring. 
2. Remove the inp

Page 2799 of 4378

FORD MUSTANG 2003  Workshop Manual DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES 
Output Shaft 
Disassembly 
1. Remove the retaining ring above fifth gear. 
2.  CAUTION: Hand tighten the special tool to prevent gear damage. 
 CAUTION: Supp

Page 2804 of 4378

FORD MUSTANG 2003  Workshop Manual 16. Remove the snap ring, then using the special tool, press off the first/second gear synchronizer. 
Assembly  1. Carry out the following before reassembling:  �zInspect the gears for broken or crack