2003 DAEWOO MATIZ fuse
[x] Cancel search: fusePage 961 of 1184
WIPERS/WASHER SYSTEMS 9D–3
DAEWOO M-150 BL2
DIAGNOSTIC INFORMATION AND PROCEDURES
WINDSHIELD/REAR WINDOW WIPER AND WASHER SYSTEM
ConditionProbable CauseCorrection
Windshield Wipers Do Not
Work At Any SpeedThe open or a short in the power
supply circuit to the fuse F8.Repair or replace the open a short
in the power supply circuit to the
fuse F8.
Fuse F8 is blown.Replace the fuse F8.
Faulty wiper/washer switch.Replace the wiper/washer switch.
The circuit between the
wiper/washer switch connector
and the wiper relay is open or
short.Repair or Replace the wiring
harness.
The circuit between the fuse F8
and the wiper relay is open or
short.Repair or Replace the wiring
harness.
Faulty wiper relay.Replace the wiper relay.
The circuit between the wiper
relay and the ground G201 is the
open circuit or a short circuit.Repair or Replace the open circuit
or a short circuit between the
wiper relay and the ground G201.
The circuit between the
wiper/washer switch and the wiper
motor is the open circuit or a short
circuit.Repair or Replace the wiring
harness.
The circuit between the fuse F8
and the wiper motor is the open
circuit or a short circuit.Repair or Replace the wiring
harness.
The circuit between the wiper
relay and the wiper motor is the
open circuit or a short circuit.Repair or Replace the wiring
harness.
Faulty wiper motor.Replace the wiper motor.
The connection of the wiper
linkage and the wiper motor is
poor.Tighten completely the nut.
Tighten completely the ball.
Wiper linkage is out of order.Replace the wiper linkage.
Wipers Do Not Work On HighFaulty wiper/washer switch.Replace the wiper/washer switch.
Speed, Low Speed OKThe circuit between the
wiper/washer switch and the wiper
motor is the open circuit or a short
circuit.Repair or Replace the wiring
harness.
Faulty wiper motor.Replace the wiper motor.
Wipers Do Not Work On LowFaulty wiper/washer switch.Replace the wiper/washer switch.
Speed, High Speed OKThe circuit between the
wiper/washer switch and the wiper
motor is the open circuit or a short
circuit.Repair or Replace the wiring
harness.
Faulty wiper motor.Replace the wiper motor.
Page 962 of 1184
9D –4 WIPERS/WASHER SYSTEMS
DAEWOO M-150 BL2
WINDSHIELD/REAR WINDOW WIPER AND WASHER SYSTEM(Cont’d)
ConditionProbable CauseCorrection
Wipers Do Not On Intermittent,
Other Speed OKThe circuit between the fuse F8
and the wiper relay is the open
circuit or a short circuit.Repair or Replace the wiring
harness.
The circuit between the fuse F8
and the wiper motor is the open
circuit or a short circuit.Repair or Replace the wiring
harness.
Faulty wiper/washer switch.Replace the wiper/washer switch.
The circuit between the
wiper/washer switch and the wiper
relay is the open circuit or a short
circuit.Repair or Replace the wiring
harness.
Faulty wiper relay.Replace the wiper relay.
The circuit between the wiper
relay and the wiper motor is the
open circuit or a short circuit.Repair or Replace the wiring
harness.
Poor ground G201.Repair or Replace the wiring
harness.
Faulty wiper motor.Replace the wiper motor.
Windshield Washer Does Not
Work, Windshield Wipers OKThe open or a short in the power
supply circuit to the fuse F9.Repair or Replace the open or a
short in the power supply circuit to
the fuse F9.
Fuse F9 is blown.Replace the fuse.
The circuit between the fuse F9
and the wiper/washer switch is the
open circuit or a short circuit.Repair or Replace the wiring
harness.
Faulty wiper/washer switch.Replace the wiper/washer switch.
The circuit between the wiper/
washer switch and the wiper relay
is the open circuit or a short
circuit.Repair or Replace the wiring
harness.
Faulty wiper relay.Replace the wiper relay.
The circuit between the wiper
relay and ground G201 is the
open circuit or a short circuit.Repair or Replace the wiring
harness.
The circuit between the
wiper/washer switch and the
windshield washer pump is the
open circuit or a short circuit.Repair or Replace the wiring
harness.
Faulty windshield washer pump.Replace the windshield wash
pump.
Poor ground G201.Repair or Replace the wiring
harness.
Page 963 of 1184
WIPERS/WASHER SYSTEMS 9D–5
DAEWOO M-150 BL2
WINDSHIELD/REAR WINDOW WIPER AND WASHER SYSTEM(Cont’d)
ConditionProbable CauseCorrection
Rear Wiper Does Not WorkThe open or a short in the power
supply circuit to the fuse F9.Repair or Replace the open or a
short in the power supply circuit to
the fuse F8.
Fuse F9 is blown.Replace the fuse F9.
The circuit between the fuse F9
and the wiper/washer switch is the
open circuit or a short circuit.Repair or Replace the wiring
harness.
Faulty wiper/washer switch.Replace the wiper/washer switch.
The circuit between the
wiper/washer switch and the rear
window wiper motor is the open
circuit or a short circuit.Repair or Replace the wiring
harness.
The circuit between the fuse F9
and the rear window wiper motor
is the open circuit or a short
circuit.Repair or Replace the wiring
harness.
Faulty rear window wiper motor.Replace the rear window wiper
motor.
Poor ground G403.Repair or Replace the wiring
harness.
Rear Window Washer Does Not
Work, Rear Window Wiper OKThe open or a short in the power
supply circuit to the fuse F9.Repair or Replace the open or a
short in the power supply circuit to
the fuse F9.
Fuse F9 is blown.Replace the fuse F9.
The circuit between the fuse F9
and wiper/washer switch is the
open circuit or a short circuit.Repair or Replace the wiring
harness.
Faulty wiper/washer switch.Replace the wiper/washer switch.
The circuit between the
wiper/washer switch and the
windshield washer pump is the
open circuit or a short circuit.Repair or replace the wiring
harness.
Faulty windshield washer pump.Replace the windshield washer
pump.
Poor ground G102.Repair or Replace the wiring
harness.
Page 979 of 1184
INSTRUMENTATION/DRIVER INFORMATION 9E–5
DAEWOO M-150 BL2
DIAGNOSTIC INFORMATION AND PROCEDURES
D19B301B
CIGAR LIGHTER
Condition Probable Cause Correction
Cigar Lighter Inoperative
The open or a short in the power supply
circuit to the fuse F7.
Repair or Replace the wiring
harness.
Fuse F7 is blown. Replace the fuse F7.
The circuit between the fuse F7 and the
terminal 2 of the cigar lighter connector is
the open circuit or a short circuit.
Repair or Replace the wiring
harness.
Faulty the cigar lighter connector.
Repair or Replace the cigar
lighter connector.
Cigar lighter element is blown. Replace the cigar lighter.
Open ground (G201) circuit.
Repair the open ground
circuit.
Page 980 of 1184
9E–6 INSTRUMENTATION/DRIVER INFORMATION
DAEWOO M-150 BL2
D19B302B
HVAC PANEL ILLUMINATION
Condition Probable Cause Correction
HVAC Panel Illumination
Inoperative The open or a short in the power supply
circuit to the fuse Ef12. Repair or Replace the wiring
harness.
Fuse Ef12 is blown. Replace the fuse Ef12
The circuit between the fuse Ef12 and the
terminal 2 of the HVAC panel illumination
connector is the open circuit or a short
circuit.
Repair or Replace the wiring
harness.
Faulty the HVAC panel illumination
connector.
Repair or Replace the
instrument panel illumination
connector.
HVAC panel illumination bulb is blown. Replace the bulb.
Open ground (G201) circuit. Repair the open ground
circuit.
Page 981 of 1184
INSTRUMENTATION/DRIVER INFORMATION 9E–7
DAEWOO M-150 BL2
D19B304B
DIGITAL CLOCK
Condition Probable Cause Correction
Digital Clock Inoperative
The open or a short in the power supply
circuit to the fuse Ef2 regardless of the
ignition position.
Repair or Replace the power
supply circuit wiring harness.
The open or a short in the power supply
circuit to the fuse F1 with the ignition
position I.
Repair or Replace the power
supply circuit wiring harness.
The open or a short in the power supply
circuit to the fuse Ef12 with the interior
courtesy lamp ON.
Repair or Replace the power
supply circuit wiring harness.
The circuit between the fuse Ef2 and the
fuse F12 is open or short.
Repair or Replace the wiring
harness.
Fuse Ef2, Ef12, F1 or F12 is blown. Replace and fuse.
The circuit between the fuse F12 and the
digital clock connector. Repair or Replace the wiring
harness.
The circuit between the fuse F1 and the
digital clock connector.
Repair or Replace the wiring
harness.
The circuit between the Ef12 and the
digital clock connector.
Repair or Replace the wiring
harness.
Faulty digital clock. Replace the digital clock.
Open ground (G201) circuit. Repair the open ground
circuit.
Page 1004 of 1184
9F –4 AUDIO SYSTEMS
DAEWOO M-150 BL2
DIAGNOSTIC INFORMATION AND PROCEDURES
AUDIO SYSTEM
ConditionProbable CauseCorrection
Audio System InoperativeThe power supply circuit to the
fuse Ef2 is open circuit or short
circuit.Repair or Replace the power
supply wiring harness.
The fuse Ef2 is blown.Replace the fuse.
The circuit between the fuse Ef2
and the fuse F11 is open or short.Repair or Replace the wiring
harness.
The fuse F6 or the fuse F11 is
blown.Replace the fuse.
The audio system circuit to the
fuse F6 or the fuse F11 is open
circuit or short circuit.Repair or Replace the wiring
harness.
Poor ground G201.Replace or Replace the wiring
harness.
Audio system is out of order.Replace the audio system.
Cassette Player Inoperative,Bad–quality tape.Do not use a bad-quality tape.
AM/FM Functions OKThe cassette player destroy a
good–quality tape.Clean the cassette player head,
the capstan, and the drive system.
Obstructions behind the tape door.Remove the obstruction using
gentle force.
Cassette player is out of order.Replace the audio system.
FM Does Not Work, AM and
Cassette OKAudio system is out of order.Replace the audio system.
AM Radio Does Not Work, FM
and Cassette OKAM radio reception is poor (Using
a test antenna, test the AM radio
reception).Replace the audio system.
AM radio reception is good (Using
a test antenna, test the AM radio
reception).Replace the antenna cable
between the audio system and the
antenna.
Front Speakers Distorted or
InoperativeDamage, rattles, or vibration of
the speaker and the door area.Make the necessary repairs to
secure the component causing the
distortion.
The circuit between the front
speaker connector and the radio
connector is open circuit or short
circuit.Repair or Replace the wiring
harness.
The connection of the front
speaker connector and the audio
connector is poor.Confirm the connection.
Front speaker is out of order.Replace the front speaker.
Audio system is out of order.Replace the audio system.
Rear Speakers Distorted or
InoperativeDamage, rattles, or vibration of
the rear speaker and the rear
parael side shelf.Make the necessary repairs to
secure the component causing the
distortion.
The circuit between the rear
speaker connector and the radio
connector is open circuit or short
circuit.Repair or Replace the wiring
harness.