2003 DAEWOO MATIZ wheel bolts

[x] Cancel search: wheel bolts

Page 432 of 1184

DAEWOO MATIZ 2003  Service Repair Manual DAEWOO M-150 BL2
SECTION 2A
SUSPENSION DIAGNOSIS
TABLE OF CONTENTS
Diagnostic Information and Procedures 2A-1. . . . . 
General Diagnosis 2A-1. . . . . . . . . . . . . . . . . . . . . . . . . Wheel Be

Page 434 of 1184

DAEWOO MATIZ 2003  Service Repair Manual SUSPENSION DIAGNOSIS  2A–3
DAEWOO M-150 BL2
��������� ���������Condition�������������� ��������������Probable Cause�������������� ��������������Correction
Hard Steering (Manual)A lack of lubricatio

Page 435 of 1184

DAEWOO MATIZ 2003  Service Repair Manual 2A–4  SUSPENSION DIAGNOSIS
DAEWOO M-150 BL2
��������� ���������Condition�������������� ��������������Probable Cause�������������� ��������������Correction
Abnormal Noise, FrontA loose stabilizer sh

Page 436 of 1184

DAEWOO MATIZ 2003  Service Repair Manual SUSPENSION DIAGNOSIS  2A–5
DAEWOO M-150 BL2
��������� ���������Condition�������������� ��������������Probable Cause�������������� ��������������Correction
Steering WheelAir in the power steering sy

Page 445 of 1184

DAEWOO MATIZ 2003  Service Repair Manual 2C – 2  FRONT SUSPENSION
DAEWOO M-150 BL2
DESCRIPTION AND OPERATION
FRONT SUSPENSION
The front suspension for this vehicle is a combination
knuckle/strut and spring design.
The control arms pivot fr

Page 450 of 1184

DAEWOO MATIZ 2003  Service Repair Manual FRONT SUSPENSION  2C–7
DAEWOO M-150 BL2
REPAIR INSTRUCTIONS
ON–VEHICLE SERVICE
D16B501A
STRUT ASSEMBLY
Removal Procedure
1. Open the hood.
2. Remove the top of the strut assembly at passenger
seat

Page 451 of 1184

DAEWOO MATIZ 2003  Service Repair Manual 2C –8  FRONT SUSPENSION
DAEWOO M-150 BL2
D16B504A
70–90 Nm
Installation  Procedure
1. Install the strut assembly to the vehicle with the strut
assembly–to–strut bracket bolts.
Tighten
Tighten

Page 452 of 1184

DAEWOO MATIZ 2003  Service Repair Manual FRONT SUSPENSION  2C–9
DAEWOO M-150 BL2
D106B507
4. Remove the control arm from the knuckle assembly.
Remove the stud bolt (1).
Separate the control arm from the knuckle assem-
bly (2).
D106B508
5
Page:   1-8 9-16 17-24 25-32 33-40 ... 48 next >