2003 BUICK RANDEZVOUS Owner's Manual

Page 65 of 432

BUICK RANDEZVOUS 2003  Owners Manual Lower Anchorages and Top Tethers
for Children (LATCH System)
Your vehicle has the LATCH system. You’llfind
anchors (A) in the second row outside passenger
positions.
To assist you in locating the l

Page 66 of 432

BUICK RANDEZVOUS 2003  Owners Manual With this system, use the LATCH system instead of the
vehicle’s safety belts to secure a child restraint.
{CAUTION:
If a LATCH-type child restraint isn’t attached to
its anchorage points, the rest

Page 67 of 432

BUICK RANDEZVOUS 2003  Owners Manual Securing a Child Restraint Designed
for the LATCH System
1. Find the anchors for the seating position you want
to use, where the bottom of the seatback meets the
back of the seat cushion.
2. Put the c

Page 68 of 432

BUICK RANDEZVOUS 2003  Owners Manual You’ll be using the lap-shoulder belt. SeeTop Strap on
page 1-54if the child restraint has one. Be sure to
follow the instructions that came with the child restraint.
Secure the child in the child r

Page 69 of 432

BUICK RANDEZVOUS 2003  Owners Manual 4. To tighten the belt, pull up on the shoulder belt
while you push down on the child restraint. If
you’re using a forward-facing child restraint, you
mayfind it helpful to use your knee to push do

Page 70 of 432

BUICK RANDEZVOUS 2003  Owners Manual 1. Make the belt as long as possible by tilting the latch
plate and pulling it along the belt.
2. Put the restraint on the seat.
3. Run the vehicle’s safety belt through or around the
restraint. The

Page 71 of 432

BUICK RANDEZVOUS 2003  Owners Manual To remove the child restraint, just unbuckle the vehicle’s
safety belt. When you remove the child restraint, be
sure to reconnect the lap and shoulder parts of the belt
so they will be ready to work

Page 72 of 432

BUICK RANDEZVOUS 2003  Owners Manual Tilt the latch plate to adjust the belt if needed.
If the shoulder belt goes in front of the child’s face
or neck, put it behind the child restraint.4. Buckle the belt. Make sure the release button