2002 TOYOTA LAND CRUISER turn signal

22Chg. Route: The ºChange Routeº screen
appears and the following settings are avail-
able.
Reroute:
To change the condition for Re-
route.
Detour: To change the condition for Detour.
(For details, see page 28.)
Way point: To set and delete a way point.
(For details, see page 54.)
Route Preference: To change the condi-
tions of the route preference. (For details,
see page 19.)
Cancel Guidance: To stop the route guid-
ance. When you touch this switch, the map
screen appears.
INFORMATION
If the calculated route includes a trip by ferry, the route guidance shows a searoute. After you travel by ferry, the cur-rent vehicle position may be incorrect.Upon reception of GPS signals, it is au-
tomatically corrected.
UN042
The current vehicle position mark ap-
pears in the center of the map screen.
You can return to this map screen show-
ing your current position at any time from
any screen by pushing the
ºMAP/
VOICEº
button on the bezel.
During driving, the current vehicle position
mark is fixed in the center of the screen and
the map moves.
If you move the map with a ºone- touchº
scroll (see page 34 for details), the current
vehicle position mark continues to track your
current location.
Current Position Display

23
INFORMATION
When you use the ºone-touchº scrollfeature, the current vehicle positionmark may disappear from the screen.Move the map with a ºone-touchºscroll again or push the
ºMAP/
VOICEº button on the bezel to return
to the current vehicle position map
location display.
The current position is automatically set
as your vehicle receives signals from the
GPS (Global Positioning System). If your
current position is not correct, it is auto-
matically corrected after your vehicle re-
ceives signals from the GPS.
INFORMATION
After the battery disconnection, or ona new vehicle, the current position maynot be correct. As soon as the systemreceives signals from the GPS, the cor-
rect current position is displayed.
If you must correct the current position
manually, follow the steps on page 59. Voice
route guidance is offered automati-
cally during route guidance. Use voice
guidance just for your reference.
You can adjust the volume of the voice or turn
off voice guidance.
UN043
Push the ºMENUº button on the bezel to
display the menu screen. Then touch any
number at the bottom of the screen to se-
lect the desired volume. If you do not
need voice guidance, touch the
ºOFFº
switch.
The selected item is highlighted in green. You can listen to ºVoice route guidanceº by
pushing
the
ºMAP/VOICEº button on the
bezel, even if the volume is ºOFFº.
INFORMATION
During route guidance, the voice guid- ance continues even if the navigationscreen is changed to other screens,such as the audio screen.
Voice Guidance

36
When your vehicle is receiving signals from
the satellites, the ºGPSº mark appears at the
top left of the screen.
The GPS signal may be physically ob-
structed, leading to inaccurate vehicle posi-
tion on the map display. Tunnels, tall build-
ings, trucks, or even the placement of
objects on the instrument panel may obstruct
the GPS signals.
The installation of window tinting may also
obstruct the GPS signals. Most window tint-
ing contains some metallic content that will
interfere with the GPS signal reception. We
recommend not to use window tinting on ve-
hicles equipped with navigation systems. The GPS satellites may not send signals due
to repairs or improvements being made to
them.
Even when the navigation system is receiv-
ing good GPS signals, the vehicle position
may not be shown accurately or inappropri-
ate route guidance may occur in some
cases.

When driving on a small angled Y-
shaped road.
 When driving on a spiral road.
 When driving on a slippery road such as
in sand, gravel, snow, etc.
 When driving on a long straight road.
 When freeway and surface streets run in
parallel.
 After moving by ferry or vehicle carrier.
 When a long route is searched during high
speed driving.
 When driving without setting the current
position calibration correctly.
 After repeating a change of directions by
going forward and backward, or turning
on a turntable in the parking lot.
 When leaving a covered parking lot or
parking garage.
 When a roof carrier is installed.
 When driving with the tire chains installed.
(a) Accurate current vehicle
position may not be shown in
the following cases:

7
The player is intended for use with 12 cm (4.7
in.) discs only.
(a) Listening to the radio
UNG610
Push these buttons to choose either an
AM or FM station.
ºAMº, ºFM1º, ºFM2º or ºFM TYPEº appears
on the display.
UNC610a
Turn this knob to step up the station band
or to step down.
Your radio automatically changes to stereo
reception when a stereo broadcast is re-
ceived. ºSTº appears on the display. If the
signal
becomes weak, the radio reduces the
amount of channel separation to prevent the
weak signal from creating noise. If the signal
becomes extremely weak, the radio
switches from stereo to mono reception. In
this case, ºSTº disappears from the display.
Radio operation