Page 4 of 122
iv
While you are driving, listen to the voice in-
structions as
much as possible and glance at
the screen briefly and only when it is safe.
However, do not totally rely on voice guid-
ance. Use it just for your information. If the
system cannot determine your current posi-
tion correctly, there is a possibility of incor-
rect, late or non-voice guidance.
The data in the system may occasionally be
incomplete. Road conditions, including driv-
ing restrictions (no left turns, street closures,
etc.) frequently change. Therefore, before
you follow an instruction from the system,
look to see whether you can comply with the
instruction safely and legally.
This system cannot warn you about such
things as the quality of a neighborhood, con-
dition of streets, and availability of emergen-
cy services. If you are unsure about the safe-
ty of an area, don't drive into it. Under no
circumstances is this system a substitute
for the driver's personal judgement. We recommend that you obtain updated
map data, when it becomes available, in or-
der to help use the system as ef
fectively and
safely as possible.
Use this system only in locations where it is
legal to do so. Some states/provinces may
have laws prohibiting video screens within
sight of the driver.
Page 9 of 122
5
5. By Home: You can select your own home
without entering the address each time. In
this case, it is necessary to register your
home beforehand. See page 15 for the de-
tailed steps.
6. By Emergency: You can select one of
the three points of emergency service points
that have been already stored in the sys-
tem's
database. See page 15 for the detailed
steps.
7. By Intersection: You can enter the
names of two intersecting streets. This is
helpful if you do not know the specific street
address of your destination but know the
general vicinity. See page 16 for the detailed
steps.
8. By Freeway Entrance/Exit: You can en-
ter the name of the freeway (interstate) en-
trance or exit. See page 17 for the detailed
steps.
9. By Previous Starting Point: You can en-
ter a point where the system has started to
guide last time. See page 19 for the detailed
steps.
10. By Map Selection: You can select a
destination simply by touching the location
on the displayed map. See page 19 for the
detailed steps.
INFORMATION
When inputting the destination, the response to the switch may be slow.
ºPoint of Interestº are mainly regis-tered in ºDetailed map coverageareasº. The registration is madebased on the NavTech ºStandardPOI Inclusion Listº.
If there is no point registered,switches such as ºMarked Pointº,ºHomeº, ºPrevious Destinationº orºPrevious Starting Pointº are
dimmed and not available.
The route for returning may not bethe same as that for going.
The route guidance to the destina-tion may not be the shortest route or
a route without traffic congestion.
Route gui dance may not be available
if there is no road data for the speci- fied location.
When setting the destination, youshould use the map on a scale of one
half mile or smaller.
To select an ºAddressº, ºPoint of In- terestº, ºFreeway Entrance/Exitº orºIntersectionº in a different region, asearch area's change is necessary.
CAUTION
While you are driving, be sure to follow
traffic regulations and keep the road
condition in mind. If a traffic sign on
the road has been changed, the route
guidance may provide wrong informa-
tion.
Page 15 of 122
11
UN201
Touch the ºInfoº switch on the screen to
display the selected destination name, ad-
dress and telephone number.
INFORMATION
The desired point of interest can be dis- played on the map screen. (For details,see page 29.)
LIST OF POINTS OF INTEREST
ALL AUTOMOTIVE
AUTOMOBILE CLUB
AUTO SERVICE & MAIN-
TENANCE
GAS STATION
LEXUS DEALERSHIPS
(all search areas)
PARKING GARAGE/HOUSE
PARKING LOT
TOYOTA DEALERSHIPS
(all search areas)
ALL BANKING
AT M
BANK
ALL COMMUNITY
CITY HALL
CIVIC/COMMUNITY CEN-
TER
CONVENTION/EXHIBITION
CENTER
COURT HOUSE
Page 61 of 122
4
This system has a function which informs
you of the time to replace certain parts or
components as well as other information
shown on the screen. (See ºInformation
Itemsº on page 5.) When the system be-
gins operating after reaching either the
Information Item's date or driving dis-
tance, the ºInformationº screen will be
displayed.
The ºInformationº screen will not be dis-
played again by touching the
ºDon't dis-
play againº
switch.
UN124
1. Push the ºINFOº button on the bezel
to display the information menu screen,
and then touch the
ºMaintenanceºswitch.
maintenance
2. Touch your desired icon and input the
conditions.
UN126
Date: Input the next maintenance date.
Distance: Input the driving distance until the
next maintenance check. You can input a
five-digit number for the driving distance.
After you input that information, touch
the
ºOKº switch. The screen then re-
turns to the ºMaintenanceº screen. The
icon's color will change to green after the
date and driving distance are input. The
icon's color will change to orange when
your vehicle needs to be serviced. The
following switches appear on the sc reen.
Delete All: Cancel all conditions which have
been inputted.
Reset Expired: Reset an item which has
satisfied a condition.
Maintenance Information
