2002 TOYOTA LAND CRUISER display

59
The current vehicle position mark will be
automatically corrected during driving
on reception of GPS signals. If your ve-
hicle cannot receive GPS signals, you
can correct the current position mark
manually.
UN112
1. Push the ºMENUº button on the bez-
el to display the ºMenuº screen, and then
touch the
ºSystem Optionº switch.
UN113
2. Touch the ºPositionº switch.
INFORMATION
For additional information on current position accuracy, see ºLimitations ofthe Navigation Systemº on page 35.

Position
UN114
1. Touch the scroll arrows to move the
cursor to your desired location.
Touch the
ºEnterº switch.
Current Position Calibration

i
Changing the route
guidance
s-007u
When you touch this switch, the Change
Route screen will appear. For details, see
page 22.
One - touch registra-
tion of marked point
s-008u
To register the current vehicle position as a
marked point. For details, see page 53.
Display of point of
interest
s-009u
Symbols such as restaurants and hotels,
etc.
can be displayed on the screen. For de-
tails, see page 29.
Deletion of point of
interest
s-010u
Symbols such as restaurants and hotels,
etc.
displayed on the screen can be deleted.
For details, see page 30. Heading-up symbol
and scale of map
On the map, the vehicle travel direction is up.
The red arrow indicates North. Touc
hing this
symbol directly on the screen changes the
map to North-up. For details, see page 35.

2When the ºAutomatic Reroutingº feature
is turned on, the system will automatical-
ly search for a new route to the destina-
tion if you leave the guidance route. This
feature does not operate while you are
driving on roads where the guidance is
not available.
To turn the ºAutomatic Rerouteº mode
on:
1. Push the
ºMENUº button on the bez-
el.
UN117
2. Touch the ºGuidance Setupºswitch.
UN118
3. Touch the ºOnº switch on the right of
ºAutomatic Rerouteº.
Selected switch is highlighted in green.
INFORMATION
If your vehicle leaves the guidance route, the system searches for a newroute to the destination. The new routemay or may not take you back to theprevious route depending on how faryou are off the original guidance route.
When the ºTime to Destinationº feature is
turned on, the time required to reach the
destination is displayed on the route
guidance screen.
UN119
To turn the ºTime to Destinationº mode
on:
1. Push the
ºMENUº button on the bez-
el.
Automatic Rerouting Time to Destination

3
UN120
2. Touch the ºGuidance Setupºswitch.
UN121
3. Touch the ºSet Average Speedºswitch on the ºGuidance Setupº screen.
UN122
4. Touch or to set the average
vehicle speeds for driving on a freeway,
main street and residential area.
If you touch the
ºDefaultº switch, the de-
fault speed is set at each item.
5. After you finish setting the desired
speeds, touch the
ºEnterº switch.
6. The guidance setup screen returns.
Touch the
ºOnº switch on the right of
ºTime to Destinationº.
Selected switch is highlighted in green.
INFORMATION

The displayed time to the destination is the approximate driving time cal-culated based on the speeds you se-
lected and your actual position along the guidance route.

The time shown may vary greatly de-pending on your progress along theroute (which may be affected by road
conditions such as traffic jams,
construction work, etc.)

Up to 99 hours 59 minutes can be dis-played.

4
This system has a function which informs
you of the time to replace certain parts or
components as well as other information
shown on the screen. (See ºInformation
Itemsº on page 5.) When the system be-
gins operating after reaching either the
Information Item's date or driving dis-
tance, the ºInformationº screen will be
displayed.
The ºInformationº screen will not be dis-
played again by touching the
ºDon't dis-
play againº
switch.
UN124
1. Push the ºINFOº button on the bezel
to display the information menu screen,
and then touch the
ºMaintenanceºswitch.
maintenance
2. Touch your desired icon and input the
conditions.
UN126
Date: Input the next maintenance date.
Distance: Input the driving distance until the
next maintenance check. You can input a
five-digit number for the driving distance.
After you input that information, touch
the
ºOKº switch. The screen then re-
turns to the ºMaintenanceº screen. The
icon's color will change to green after the
date and driving distance are input. The
icon's color will change to orange when
your vehicle needs to be serviced. The
following switches appear on the sc reen.
Delete All: Cancel all conditions which have
been inputted.
Reset Expired: Reset an item which has
satisfied a condition.
Maintenance Information

5
Touch the
ºOFFº switch at the top of the
screen, and the information screen will no
longer be displayed.
INFORMATION

For scheduled maintenance infor- mation, please refer to the ºSched-uled Maintenance Guideº or ºOwn-er's Manual Supplementº.

Depending on your driving or theroad conditions, the system mayhave a time-lag between the datawhich have been inputted and theactual date and driving distance.
Information Items
Scheduled Maintenance
Oil Change
Replace Oil Filter
Rotate Tires
Replace Tires
Replace Battery
Replace Brake Pad
Replace Wiper Blades
Replace Engine Coolant
Replace Brake Fluid
Replace Automatic
Transmission Fluid
Replace Air Conditioning
Filter
Replace Air Cleaner Filter
Wedding Anniversary
Birthday

6
Maintenance
You can register your dealer's name and
address. Touch the
ºDealerº switch on
the ºMaintenanceº screen.
UN128
1. Touch the ºRegister Dealerºswitch.
2. Enter your dealer's location address in
the same way as you input any destina-
tion. (See page 6 through 19.)
3. After you enter your dealer, the screen
changes and displays the map location of
the dealer. If it is OK, touch the
ºEnterºswitch.
The current screen changes to the screen
where you can edit the data of your dealer.
(See (b) Editing dealer.)
By touching the
ºGo to Dealerº switch
the system sets your dealer as a destination.
(See (d) Going to dealer.)
Dealer Setting (a) Registering dealer

7
UN130
1. Touch the ºEdit Dealerº switch.
2. Touch the item to edit.

Editing a ºDealerº or a ºStaffº
UN132
Touch alphabet or numeral keys directly
to input the name.
After you finish your entry, touch the
ºEn-
terº
switch at the bottom right of the screen.
The previous screen will be displayed.

Editing a ºPositionº
UN133UN133t
Touch the arrows to scroll to your desired
point on the map screen.
Touch the
ºEnterº switch when the cursor
moves to your desired point.
The previous screen will be displayed.
(b) Editing dealer