2002 PEUGEOT 807 ignition

18-11-2002
14 Windscreen washwipe
stalk.
Trip computer stalk.
15 Audio remote control stalk.
16 Interior alarm disarming
switch.
17 Electric mirror controls.
Window controls.
Rear window locking control.
18 Steering lock and ignition.
19 Dynamic stability control
(ESP/ASR) switch.
20 Headlamp height
adjustment.
21 Fuse box.
22 Handbrake.
23 Steering wheel adjustment
control.
24 Battery / Fuse box.
25 Heated seat switches.
26 Storage. 27
Gear lever.
28 Cooled compartment.
29 Ashtray / Can holder.
30 Storage compartment
or remote control keypad.
31 Lighter / 12 V accessories
socket.
32 Hazard warning lights
switch.
33 Air conditioning controls.
34 Passenger compartment
temperature sensor.
35 Passenger lower glove box.
36 Passenger air bag.
37 Side vent.
38 Bonnet release.
39 Passenger air bag disarming
switch*.
* According to country.
YOUR 807 AT A GLANCE3
1 Side window demisting
vents.
2 Speaker (tweeter).
3 Windscreen demisting
vents.
4 Passenger upper glove box.
5 Brightness sensor.
6 Instrument panel /
Multifunction display.
7 RB3, RD3, RT3 audio
equipment with flap.
8 Central vents.
9 Driver’s upper glove box.
10 Lights and direction
indicators stalk.
11 Cruise control controls.
12 Check unit.
13 Driver’s air bag.
Horn.

THE KEYS
The keys allow you to switch on
the ignition and to independently
operate the front doors, the fuel
filler cap, the glove box, the pas
senger air bag disarming switch
and the mechanical child lock.
Central locking
From the driver’s or passenger
door, the keys allow you to lock,
deadlock or unlock the doors and
the tailgate and to fold back the
exterior mirrors.
If one of the doors or the boot is
open, it is impossible to operate
the central locking.
The remote control performs
the same functions at a
distance.The remote control key
Locking
Press button
Ato lock the vehicle.
Button Aalso locates the vehicle
and reinitialises the remote con- trol.
Deadlocking
Press button Ato deadlock the
vehicle and close the windows
automatically.
A second press on button Ain
the five seconds following dead
locking, changes deadlocking to
normal locking.
Deadlocking renders the
internal and external doorlocking controls inoperative. Do not leave anyoneinside the vehicle when it is deadlocked.
Unlocking/Ventilation
Press button Bto unlock the vehi
cle.
A second press on buttonBin
the five seconds following unlock
ing opens the windows. Opening/Closing the electric
sliding side doors
Along press on button
C or D
unlocks the vehicle, then permits
opening or closing of the corre
sponding rear door.
Folding/Unfolding the key
Press button Eto unfold or fold
the key in its case.
STARTING
1 STOP position: the ignition is off.
2 1 st
notch, Accessories
position:
the ignition is off but the
accessories can be used.
3 2 nd
notch, Running posi
tion:
the ignition is on.
4 Starting position: operates the starter.
4
103
18-11-2002
YOUR 807 AT A GLANCE

18-11-2002
YOUR 807 AT A GLANCE6SEATS
Manual front seats
1Forwardsbackwards adjustment.
2 Seat back angle adjustment.
3 Driver’s seat height adjustment.
4 Driver’s seat lumbar adjustment.
5 Head restraint height and angle adjustment.
6 Seat rotation.
7 Heated seat.
Electric front seats
AForwardsbackwards adjust
ment.
B Driver’s seat height adjust
ment.
C Seat back angle adjustment.
M Storing of settings.
➜ Switch on the ignition, adjust
the seat and the mirrors.
➜ Press button "M"then "1"or
"2" within 4 seconds.
1 Recall of the first position.
2 Recall of the second posi
tion.
89
90

YOUR 807 AT A GLANCE11
CRUISE CONTROL
The cruise control makes it possi
ble to maintain a constant vehicle
speed programmed by the driver
(above 25 mph [40 km/h] with 4 th
or 5 th
gear engaged), without the
accelerator pedal being pressed.
Switching on
➜Place the knob 1in the
ON position. The
warning light comes
on, accompanied by
an audible signal.
Storing a speed
➜Press button 2 or 3 to store the
speed at which you are driving.
➜Press button 2to reduce the
stored speed or button 3to
increase it.
Deactivating the stored speed
➜Press button 4 or the brake or
clutch pedal. Recalling the stored speed
➜Press button
2 or 3.
Cancelling the stored speed
➜Place the knob 1in the OFF
position.
Note: the stored speed is can
celled when the ignition is
switched off.
FRONT, SIDE AND
CURTAIN AIR BAGS
Disarming the passenger air
bag*
➜With the ignition off, insert the
key into control 1and turn it:
– "ON" position, passenger air
bag activated,
– "OFF" position, passenger air
bag disarmed. Precautions regarding the
passenger air bag
➜activate the
air bag for an
adult passen
ger,
➜disarm the
air bag if you
install a rear
facing child
seat.
Do not place your feet or any
object on the instrument panel.
Operating check When the passenger air
bag is disarmed, the
warning light comes on
when the ignition is
switched on (2 nd
key
notch), accompanied by an audi
ble signal and the message
"Passenger air bag disarmed" .
Air bag fault
If this warning light
comes on, accompanied
by an audible signal and
the message "Air bag
fault" , consult a
PEUGEOT dealer to
have the system
checked.
* According to country.
134
18-11-2002

PEUGEOT SERVICING
22
A few seconds after the ignition is
switched on, the total distance recor
der resumes normal operation and
the display shows the total and trip
distances.
The distance remaining before the
next service is less than 500 miles.
When the ignition is switched on and
for a few seconds, the symbol
flashes and the distance remaining
is displayed:
A few seconds after the ignition is
switched on, the oil level is dis
played, then the distance recorder
resumes normal operation and the
spanner remains lit. This indicates
that a service should be carried out
shortly.
SERVICE INDICATOR
Located on the instrument panel with
the total distance recorder (total and
trip distances), this programmes ser
vice intervals depending on the use
of the vehicle.
Operation
A few moments after the ignition has
been switched on, the spanner sym
bolising a service lights up; the dis
play for the total distance recorder
tells you (in round figures) the dis
tance remaining before your next
service.
Example: 4,800 miles remain before
the next service is due. When the
ignition is switched on and for a few
seconds, the display shows: The service is overdue
Each time the ignition is switched on
and for a few seconds, the symbol
flashes and the excess distance is
displayed.
Note:
with the engine running the
symbol flashes until the service has
been carried out.
18-11-2002

PEUGEOT SERVICING23
Zero reset Y our PEUGEOT dealer carries out
this operation after each service.
However, if you carry out the service
yourself, the reset procedure is as
follows:
 Switch off the ignition,
 Press and hold the trip recorder
reset button,
 Switch on the ignition.
The display begins a countdown.
When the display shows "=0", relea
se the button; the service symbol
disappears.
Important: after this operation, if
you wish to disconnect the battery,
lock the vehicle and wait for at least
five minutes, otherwise the zero re
set will not be registered.
MAINTENANCE OF PARTS SUBJECT TO WEAR AND A CHECK OF
CONSUMABLES
Certain essential components on your vehicle are subject to checks a t specific
frequencies.
• The brake fluid is to be replaced at a maximum of every 36,000/40,000 miles
(60 000km) or every two years;
• The pollen filter must be checked at each serviceby a PEUGEOT dealer
(services and intermediate visits) or more often, depending on the environ
ment (dust, pollution, etc.);
• For HDI turbo diesel engines with particulate emission filter , maintenance
of the filterand topping up of the additive reservoirmust be carried out at a
maximum of every 48,000 miles (80 000 km) by a PEUGEOT dealer;
• Replacement of the timing belt: contact a PEUGEOT dealer.
• Air bags and pretensioning parts on seat belts must be checked every
10 years.
• Tyre pressure sensors are to be replaced every 10 years.
• The check on tyre inflation presure must be carried out cold at least once a
month.
Note: the engine coolant does not have to be replaced.
18-11-2002

INSTRUMENTS AND CONTROLS
28
INSTRUMENTS AND CONTROLS
A warning light continuously lit, or flashing with the eng ine running, is an indication of a malfunction in the
relevant unit. Some warning lights may be linked to buzzer s and a message on the multi–function display. Do not
ignore this warning: contact a PEUGEOT dealer as quickly a s possible.
If the central STOP warning light comes on when you are d riving, stop immediately where it is safe to do so.
Central STOP warning light
This is linked to the "engine oil pressure", "coolant level low " and "brake fluid level" warning lights and the coolant
temperature gauge and puncture warnings, indicated by a message on the multifunction display.
It comes on each time the ignition is switched on.
Stop immediately .
Contact a PEUGEOT dealer.
Engine oil pressure warning light
This is linked to the central STOPwarning light.
If it comes on with the engine running, it is accompanied b y an audible signal and the message "Oil pressure low"
or "Top up engine oil" on the multifunction display.
Stop immediately .
In the case of a lack of oil in the lubricating circuit, top up the level.
Contact a PEUGEOT dealer without delay.
Low coolant level warning light
This is linked to the central STOPwarning light.
It comes on each time the ignition is switched on.
Illumination of this warning light, with the engine run ning, is accompanied by an audible signal and the message
"Top up coolant" on the multifunction display.
Stop immediately.
Warning: allow the engine to cool before topping up.
The cooling system is pressurised.
To prevent the risk of scalding, unscrew the cap by two turns to allow the pressure to drop.
Once the pressure has dropped, remove the cap and topup the le vel.
Contact a PEUGEOT dealer.
18-11-2002

Handbrake,low brake fluid level and electronic brake force distri bution warning light
This is linked to the central STOPwarning light.
It comes on each time the ignition is switched on.
This warning light is accompanied by an audible signal and a message on the multifunction display indicating the
cause of the warning:
– "Handbrake on" , if the handbrake is on or not released correctly while driving ,
– "Brake fluid low" in the event of an excessive drop in the brake fluid level (if the warning light remains lit even with the
handbrake released),
– "Braking fault" , displayed at the same time as the ABS warning light, indicat ing an electronic brake force distribution
system fault.
Stop immediately.
Contact a PEUGEOT dealer.
INSTRUMENTS AND CONTROLS 29
Dynamic stability control warning light (ESP/ASR)
This comes on each time the ignition is switched on.
If it remains on or comes on with the engine running and th e vehicle moving, it is accompanied by an audible
signal and the message "ESP/ASR not operational" on the multifunction display.
Contact a PEUGEOT dealer.
It flashes when the system is activated and is lit continuously when the system is switched off.
Antilock braking system (ABS) warning light
This comes on each time the ignition is switched on.
If it remains on or comes on above 8 mph (12 km/h), it indicates a
malfunction of the ABS.
However, the vehicle retains conventional servoassisted braking.
Illumination of this warning light is accompanied by an aud ible signal and the message "ABS fault" on the multifunction
display.
Contact a PEUGEOT dealer.
18-11-2002