Removal
IDrain oil from transfer and transmission.
IRemove front and rear propeller shafts Ð Refer to PD section.
IInsert plug into oil seal after removing propeller shaft.
CAUTION:
Be careful not to damage spline, sleeve yoke and rear oil seal,
when removing propeller shaft.
IRemove torsion bar Ð Refer to removal and installation of
lower link in FA section. Then remove fifth crossmember.
IRemove transfer control lever from transfer outer shift lever.
IRemove transfer from transmission.
WARNING:
Support transfer while removing it.
Installation
IApply recommended sealant to mating surface to transmission.
Recommended sealant:
Nissan genuine part (KP610-00250) or equivalent
ITighten bolts securing transfer.
Bolt No.Tightening torque
N×m (kg-m, ft-lb)mm (in)
q
131 - 41 (3.2 - 4.2, 23 - 30) 45 (1.77)
q
231 - 41 (3.2 - 4.2, 23 - 30) 60 (2.36)
SMT478A
NMT010
SMT495A
SMT496A
REMOVAL AND INSTALLATION
TF-7
