Page 121 of 2100
HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
1A±95
STEP 3: Sensor Output Check
865R200035
Page 122 of 2100
1A±96
HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
STEP 4: Operation Check
865R200032
Page 123 of 2100
HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
1A±97
Inspection By Failed Location
Inspection of the Sensors
When the self-diagnosis function has determined that
trouble is present on the sensors, check them according
to the following flow chart.
F01RY00005
Page 124 of 2100
1A±98
HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
Chart 1: In Car Sensor
D08R200029
StepActionValue(s)Ye sNo
1Disconnect the in car sensor connector. (No.I-17)
Is performance of the sensor normal? (Refer to the
later section on ªIndividual Inspectionº)ÐGo to Step 2
Replace the
in car sensor
2Is there continuity between the harness side connector
No.I20±1 and No.I17±3?
ÐGo to Step 4Go to Step 3
3Repair an open circuit between terminal No.I20±1 and
No.I17±3.
Is the action complete?
ÐGo to Step 2Ð
4Is there continuity between the harness side connector
No.I20±11 and No.I17±4?
ÐGo to Step 6Go to Step 5
5Repair an open circuit between terminal No.I20±11 and
No.I17±4.
Is the action complete?
ÐGo to Step 4Ð
6Replace the auto air conditioner control unit.
Is the action complete?
ÐVerify repairÐ
Page 125 of 2100
HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
1A±99
Chart 2: Ambient Sensor
D08R200030
StepActionValue(s)Ye sNo
1Disconnect ambient sensor connector. (No.C±19)
Is performance of the ambient sensor normal? (Refer
to the
later section on ªIndividual inspectionº)ÐGo to Step 2
Replace the
ambient
sensor
2Connect the ambient sensor connector.
Is resistance between the harness side connector
No.I20±2 and No.I20±11 normal?Refer to the
later section
on ªIndividual
inspectionº
Go to Step 4Go to Step 3
3Repair an open circuit between terminal No.I20±2 and
No.C19±1 or No.I20±11 and No.C19±2.
Is the action complete?
ÐVerify repairÐ
4Replace the auto air conditioner control unit.
Is the action complete?
ÐVerify repairÐ
Page 126 of 2100
1A±100
HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
Chart 3: Sun Sensor
D08R200059
StepActionValue(s)Ye sNo
1Disconnect the sun sensor connector. (No.I±15)
Is performance of the sun sensor normal? (Refer to the
later section on individual inspection)ÐGo to Step 2
Replace the
sun sensor.
2Is there continuity between the harness side connector
terminal No.I20±3 and No.I15±2?
ÐGo to Step 4Go to Step 4
3Repair an open circuit between terminal No.I20±3 and
No.I15±2.
Is the action complete?
ÐGo to Step 2Ð
4Is there continuity between the harness side connector
terminal No.I20±11 and No.I15±1?
ÐGo to Step 6Go to Step 5
5Repair an open circuit between terminal No.I20±11 and
I15±1.
Is the action complete?
ÐGo to Step 4Ð
6Replace the auto air conditioner control unit.
Is the action complete?
ÐVerify repairÐ
Page 127 of 2100
HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
1A±101
Inspection of the Intake Actuator System
D08R200060
Page 128 of 2100

1A±102
HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
ConditionPossible causeCorrection
Does not work at allÐRefer to Chart A
Control failureÐRefer to Chart B
Chart A: Does Not Work At All
StepActionValue(s)Ye sNo
1Is the fuse FL±1 normal?
ÐGo to Step 2
Replace the
fuse
2Is the fuse F±7 normal?
ÐGo to Step 3
Replace the
fuse
3Is the relay X±1 normal?
ÐGo to Step 4
Replace the
relay
4Turn on the ignition switch. (the engine is run.)
Is the battery voltage applied between the harness side
connector terminal No.C33±3 and ground?
Approx 12VGo to Step 6Go to Step 5
5Repair an open circuit between terminal No.C33±3 and
No.X1±1.
Is the action complete?
ÐGo to Step 4Ð
6Is the battery voltage applied between the harness side
connector terminal No.C33±4 and ground?
Approx 12VGo to Step 8Go to Step 7
7Replace the intake actuator motor.
Is the action complete?
ÐGo to Step 6Ð
8Is there continuity between the harness side connector
terminal No.I19±11 and No.C33±4?
ÐGo to Step 10Go to Step 9
9Repair an open circuit between No.I19±11 and C33±4.
Is the action complete?
ÐVerify repairÐ
10Replace the auto air conditioner control unit.
Is the action complete?
ÐVerify repairÐ