2002 Hyundai Grandeur Owner's Manual

1- 76 FEATURES OF YOUR HYUNDAI
B710A01L-GAT HEATING AND COOLING CONTROL
1. Side Ventilator
2. Side Defrost Nozzle
3. Center Ventilator
4. Windshield Defrost Ventilator B710B01A-AAT Center Ventilator The center ventilators are located in the middle of the dashboard.To change the direction of the airflow, turn the control knob on the middle of the ventilator as desired.
B710C01Y-AAT Side Ventilator The side vent knobs control the amount of outside air entering the vehiclethrough the side vents. These vents can also be closed,so no air enters through the side vents. To change thedirection of the air flow, turn the controlknobs as desired.
B710A01L-AAT VENTILATION To operate the ventilation system:
o Set the air intake control at the fresh
air ( ) position.
o To direct all intake air to the dash-
board vents, set the airflow control
to the face ( ) position.
o Adjust the fan speed control to the desired speed.
B710A01L-1
13 4122

FEATURES OF YOUR HYUNDAI 1- 77
1 B670B03Y-AAT Fan Speed Control (Blower Control)
HXG121
This is used to turn the blower fan on and off and to select the fan speed.The blower fan speed, and thereforethe volume of air delivered from thesystem, may be controlled manually by setting the blower control between the 1 and 4 position.
B680A02L-GAT ROTARY AND PUSH BUTTON
TYPE (If Installed) There are four controls for the heating and cooling system. They are:
1. Fan speed control
2. Air intake control
3. Air flow control
4. Temperature control
HXG1192
3
4
B670C01Y-AAT Air Intake Control This is used to select fresh outside air or recirculating of inside air. FreshRecirculation
With the " " mode selected, air entersthe vehicle from outside and is heated or cooled according to the other func- tions selected.With the " " mode selected, air fromwithin the passenger compartment isdrawn through the heating system andheated or cooled according to the other functions selected. B670C02L

1- 78 FEATURES OF YOUR HYUNDAI
NOTE:
o It should be noted that prolonged
operation of the heating system in " " mode will give rise tomisting of the windshield andside windows and the air withinthe passenger compartment will become stale. In addition pro- longed use of the air condition-ing with the " " mode selectedmay result in the air within thepassenger compartment becom-ing excessively dry.
o When the ignition switch is
turned "ON", the air intake con-trol will change to " " mode(regardless of switch position).This is normal operation.
HEF030
B670D01L-AAT Air Flow Control This is used to direct the flow of air. Air can be directed to the floor, dashboard outlets, or windshield. Five symbols are used to represent Face, Bi-Level,Floor, Floor-Defrost and Defrost airposition.
Face-Level
Selecting the "Face" mode will cause air to be discharged through the face level vents.
B670D03L
B670D02L

FEATURES OF YOUR HYUNDAI 1- 79
B670D04L
Bi-Level
Air is discharged through the face vents and the floor vents. This makes it possible to have cooler air from thedashboard vents and warmer air fromthe floor outlets at the same time.
Floor-Level
Air is discharged through the floor vents,windshield defroster nozzle, side de-froster nozzle, side ventilator. Floor-Defrost Level
Air is discharged through the wind-shield defrost nozzle, the floor vents, side defroster nozzle, side ventilator. If the "Floor-Defrost" mode is selected,the A/C will turn on automatically and"Fresh" mode will be activated. B670D05L
Defrost-Level
Air is discharged through the wind-shield defrost nozzle, side defrosternozzle, side ventilator.If the "Defrost" mode is selected, the A/C will turn on automatically and "Fresh" mode will be activated. B670D06L

1- 80 FEATURES OF YOUR HYUNDAI
This control is used to adjust the degree of heating or cooling desired.B670E02A-AAT Temperature Control
HXG124
Cool
Warm B690A02S-AATHEATING CONTROLS
For normal heating operation, set the air intake control to the fresh air ( )position and the air flow control to thefloor ( ) position. For faster heating, the air intake con- trol should be set in the recirculate ( )position. If the windows fog up, set the air flow control to the "Def" (defroster) posi- tion. (The A/C will turn on automati- cally and "Fresh" mode will be acti-vated.) For maximum heat, move the tem- perature control to "Warm". HXG119
B700A01A-AAT BI-LEVEL HEATING Your Hyundai is equipped with bi-level heating controls. This makes it pos-sible to have cooler air from the dash-board vents and warmer air from thefloor outlets at the same time. To use this feature:
o Set the air intake control to the fresh
air ( ) position.
o Set the air flow control at the bi-level ( ) position.
o Set the temperature control between
"Cool" and "Warm" B700A01L

FEATURES OF YOUR HYUNDAI 1- 81
To remove frost or exterior fog on the windshield:
o Set the air flow control to the defrost
( ) position. (The A/C will turn on automatically and "Fresh" mode will be activated.)
o Set the temperature control to warm.
o Set the fan speed control to position "3" or "4".
NOTE:
When the A/C is operated continu-
ously on the floor-defrost level ( )
or defrost level ( ), it may cause fogto form on the exterior windshield. Ifthis occurs, set the air flow control to
the face level position ( ) and fanspeed control to the low position.
B720A03FC-AAT DEFROSTING/DEFOGGING
Use the heating/ventilation system to defrost or defog the windshield: To remove interior fog on the windshield:
o Set the air flow control to the defrost ( ) position. (The A/C will turn on automatically and "Fresh" mode willbe activated.)
o Set the temperature control to the desired position.
o Set the fan speed control between "1" and "4" position. B720A01L
B720A04L
o To keep dust or unpleasant fumesfrom entering the car through theventilation system, temporarily setthe air intake control to the po- sition. Be sure to return the control to the position when the irritationhas passed to keep fresh air in thevehicle. This will help keep the driveralert and comfortable.
o Air for the heating/cooling system is drawn in through the grilles justahead of the wind-shield. Careshould be taken that these are notblocked by leaves, snow, ice orother obstructions.
B730A01FC-AAT OPERATION TIPS
B730A01L

1- 82 FEATURES OF YOUR HYUNDAI
o To prevent interior fog on the wind-
shield, set the air intake control to the fresh air ( ) position and fanspeed to the desired position.
B740A01S-AAT AIR CONDITIONING SYSTEM Air Conditioning Switch The air conditioning is turned on or off by pushing the A/C button on the heat-ing/air conditioning control panel. B670C03L
To use the air conditioning to cool theinterior:
o Set the side vent control to "OFF",
to shut off the outside air entry.
o Turn on the fan control switch.
o Turn on the air conditioning switch by pushing in on the switch. The air conditioning indicator light should come on at the same time.
o Set the air intake control to the fresh air ( ) position.
B740B01L-GAT Air Conditioning Operation
(If Installed) Cooling
HXG119o Set the temperature control to "Cool".
("Cool" provides maximum cooling. The temperature may be moderatedby moving the control toward"Warm".)
o Adjust the fan control to the desired
speed. For greater cooling, turn thefan control to one of the higherspeeds or temporarily select therecirculate ( ) position on the airintake control.

FEATURES OF YOUR HYUNDAI 1- 83
B740C01A-AAT De-Humidified Heating For dehumidified heating:
o Turn on the fan control switch.
o Turn on the air conditioning switch.
The air conditioning indicator lightshould come on at the same time.
o Set the air intake control to the fresh air ( ) position.
o Set the air flow control to the face ( )
position.
o Adjust the fan control to the desired
speed.
o For more rapid action, set the fan at
one of the higher speeds.
o Adjust the temperature control to
provide the desired amount ofwarmth.