2002 HONDA ACCORD COUPE Owners Manual

Make sure the repair f acility uses
genuine Honda replacement body
parts. Some companies make sheet
metal pieces that seem to duplicate
the original Honda body parts, but
are actually inf erior in f it, f inish, and
corrosion resistance. Once installed,
they do not give the same high-
quality appearance. Body repairs can af f ect your car’s
resistance to corrosion. If your car
needs repairs af ter a collision, pay
close attention to the parts used in
the repair and the quality of the
work.Takeyourcartoyourauthorized
Honda dealer f or inspection af ter the
repairs are completed. Your dealer
can make sure that quality materials
were used, and that corrosion-
preventive coatings were applied to
all repaired and replaced parts. When reporting your collision to the
insurance company, tell them you
want genuine Honda parts used in
the repair. Although most insurers
recognize the quality of original
parts, some may try to specif y that
the repairs be done with other
available parts. You should investi-
gate this before any repairs have
begun.
Body Repairs
Appearance Care310

This section covers the more-
common problems that motorists
experience with their vehicles. It
gives you inf ormation about how to
safely evaluate the problem and what
to do to correct it. If the problem has
stranded you on the side of the road,
you may be able to get going again.
If not, you will also f ind instructions
on getting your car towed.......................
Compact Spare Tire .312
....................
Changing a Flat Tire .313
..........
If Your Engine Won’t Start . 319
Nothing Happens or the Starter Motor Operates ............................
Very Slowly .319
The Starter Operates ................................
Normally .320
................................
Jump Starting .321
............
If Your Engine Overheats . 324
.........
Low Oil Pressure Indicator . 327
..........
Charging System Indicator . 328
.......
Malf unction Indicator Lamp . 329
.......................
Readiness Codes .330
...............
Brake System Indicator . 331
..................
Closing the Moonroof . 332
..............................................
Fuses .333
..........
Checking and Replacing . 334
......................
Emergency Towing .338
Taking Care of the Unexpected
T aking Care of t he Unexpect ed311

Follow these precautions whenever
you are using the compact spare tire:Thecompactsparetirehasashorter
tread lif e than a regular tire. Replace
it when you can see the tread wear
indicator bars. The replacement
should be the same size and design
tire, mounted on the same wheel.
Thecompactsparetireisnot
designed to be mounted on a regular
wheel, and the compact wheel is not
designed f or mounting a regular tire.
Check the inf lation pressure of the
compact spare tire every time you
check the other tires. It should be
inf lated to:
Do not exceed 50 mph (80 km/h)
under any circumstances.
This tire gives a harsher ride and
less traction on some road sur-
f aces than the regular tire. Use
greater caution while driving on
this tire.
Do not mount snow chains on the
compact spare.
Your car has a compact spare tire
that takes up less space. Use this
sparetireasatemporaryreplace-
ment only. Get your regular tire
repaired or replaced and put it back
on your car as soon as you can.
The wheel of the compact spare
tire is designed especially to f it
your car. Do not use your spare
tire on another vehicle unless it is
thesamemakeandmodel.
Turn off the Traction Control
System (see page ). Driving
withthecompactsparetiremay
activate the TCS.221
On all V6 models
Compact Spare Tire
T aking Care of t he Unexpect ed312
I IN
ND DI
ICCA A T
TO
OR R
L
LO OC CAA T
TI
IOON N
M
M A
AR
RKK
T
TR
RE EA
A D
D W
WE EA
A R
R
I
IN ND DI
ICCA A T
TO
OR R
B
BA A R
R
60 psi (420 kPa , 4.2 kgf/cm)

If you have a f lat tire while driving,
stop in a saf e place to change it.
Stopping in traf f ic or on the shoulder
of a busy road is dangerous. Drive
slowly along the shoulder until you
gettoanexitoranareatostopthat
is far away from the traffic lanes.Open the trunk. Raise the trunk
f loor by lif ting up on the back edge.
The tools are in the tool box on
the right side of the trunk. Take
the tools out of the tool box.
Park the car on f irm, level and
non-slippery ground away f rom
traffic. Put the transmission in
Park (automatic) or Reverse
(manual). Apply the parking brake.
If you are towing a trailer, unhitch
the trailer.
Turn on the hazard warning lights
and turn the ignition switch to
LOCK (0). Have all the
passengers get out of the car while
you change the tire.
4. 3.
2. 1.
CONT INUED
Changing a Flat T ire
T aking Care of t he Unexpect ed313
J JA
A C
CKK
S
SP PA
A R
REE T
TI
IRRE E
T
T
R
RU UN NKK F
FLLOOO ORR T
TO
OO OLL K
KIITT
The car can easily roll off the
jack, seriously injuring anyone
underneath.
Follow the directions for
changing a tire exactly, and
never get under the car when it
is supported only by the jack.

Loosen the wheel nuts (f our f or
the4-cylindermodels,fiveforthe
V-6 models) 1/2 turn with the
wheel wrench.
Turn the jack’s end bracket
counterclockwise to loosen it, then
remove the jack.
Unscrew the wing bolt and take
the spare tire out of its well.
The jack is behind a cover in the
right f ender. Remove the cover by
turning the handle counterclock-
wise, then pulling on the cover. 7.
8.
5.
6.
T aking Care of t he Unexpect ed
Changing a Flat T ire
314
J JA A C
CKK W
WH
HE
EE
EL
L N
NUUTTS
S
W
WH HE
EE
EL
L W
WR REEN
NC CHH
C
CO
OV VE
ER
R

Ú
CONT INUED
Remove the wheel nuts and f lat
tire. Temporarily place the f lat tire
on the ground with the outside
surf ace of the wheel f acing up.
You could scratch the wheel if you
putitfacedown.
Use the extension and wheel
wrench as shown to raise the
vehicle until the f lat tire is of f the
ground.
Locate the jacking point nearest
thetireyouneedtochange.Itis
pointed to by a mark molded
into the underside of the body.
Place the jack under the jacking
point. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
restinginthejacknotch. 10.
11.
9.
Changing a Flat T ire
T aking Care of t he Unexpect ed315
W WH
HE
EE
EL
L W
WR REEN
NC CHH E
E
X
X T
TE
EN
NS SIIOON N
J
JA A C
CKKIINNG G P
PO
OI INNT T

Put on the spare tire. Put the
wheel nuts back on f inger-tight,
then tighten them in a crisscross
pattern with the wheel wrench
until the wheel is f irmly against
the hub. Do not try to tighten
them f ully.
Bef ore mounting the spare tire,
wipeanydirtoff themounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully,itmaybehotfrom
driving.
Do not attempt to forcibly pry the
wheel cover of f with a screwdriver or
other tool. The wheel cover cannot
be removed without f irst removing
the wheel nuts. 12.
13.On U.S. LX and LX-V6 models
T aking Care of t he Unexpect ed
Changing a Flat T ire
316
B BRRAA K
KEE H
HU
UB B
W
WH
HE
EE
EL
L C
COOV VE
ER
R
W
WH HE
EE
EL
L N
NUUTTS
S

CONT INUED
Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
f acility.
Tighten the wheel nuts to:
Lower the car to the ground and
remove the jack.
15.
14.
Changing a Flat T ire
T aking Care of t he Unexpect ed317
4 4- -c
cy yl liinn d
de
err m
m o
od
de
ellss 6
6-
-c
cy yl liinn d
de
err m
m o
od
de
ellss
80 lbf·ft (108 N·m , 11 kgf·m)