2002.5 Peugeot 406 display

29-07-2002
Main menu
Switch on the ignition.
Press the "Menu"button to access the main menu.
Select a function using the direction arrows, then confirm ( "VAL" button). The
"Navigation/guidance" menu offers various options
for selecting guidance:
By entering the address of a new destination.
By selecting a service (Hotel, station, airport...) available in a town.
By selecting an address stored in one of the two directo ries.
By resuming previously interrupted guidance or by stop ping current guidance. Two messages may be displayed
depending on the previous actions: "Resume guid
ance" or "Stop guidance" .
Radio functions are suspended when the system is in guidance mode.
YOUR 406 IN DETAIL
98
Navigation / Guidance
Following selection of the "Navigation/guidance"menu,
a screen warns you about the use of the navigation sys
tem. Follow the regulations in force and do not use the
remote control while driving.
Press the "VAL"button to access the next screen.

29-07-2002
Entering a new destination
The last town entered is displayed.
To enter the name of another town, select each letter using
the direction arrows then confirm ("VAL"button) for each
letter.
If an error is made, the "Correct" function enables the last
letter entered to be deleted.
As the name is entered, the "List"function indicates the
number of towns beginning with the same letters. If the li st
contains less than 5 names, these are displayed automat
ically. Select a town then confirm ( "VAL"button).
The "Change" function enables the town entered to be
completely cleared.
When the complete name of the town is displayed, select
the "Validate" function then press the "VAL"button.
Note: following confirmation of a letter, only those letters
which could make up an existing name appear. Enter the name of the street. Select the
"Validate"function
then press the "VAL"button.
Note: the guidance can be activated from the time the
town is entered, without the name of a street or a number.
To do this, select the "Town centre"function.
YOUR 406 IN DETAIL 99
Enter the number in the street. Select the "Validate"func
tion then press the "VAL"button.
Note: the guidance can be activated as soon as the town
and street are entered, without a number. To do this, sele ct
the "Validate" function.

29-07-2002
YOUR 406 IN DETAIL
100
The complete destination is displayed. Select the "Vali
date" function then press the "VAL"button.
Note: you can also change the destination or store it in one
of the two directories (see the section on storing an
address in a directory).
The last guidance criterion used is displayed.
Guidance begins automatically, retaining this criterion if
there is no action within 5 seconds or following confirma
tion of the "NO"function.
Follow the instructions.
If you wish to change the guidance criterion, select the
"YES" function then press the "VAL"button. Select a criterion from the list offered then confirm (
"VAL"
button). When the criterion of your choice is selected,
select the "Validate" function then press the "VAL"button.
Guidance begins, follow the instructions.

29-07-2002
YOUR 406 IN DETAIL101
Selecting a service
The last address entered is displayed.
There are 3 options for defining the location in which you
wish to obtain this service:
repeat the last address entered by means of the "Vali
date" function.
enter the name of a new town then enter the street (or use the "Town centre" function) by means of the
"Change" function.
automatically enter your current location by using the "current location" function.
After confirming the address, select a service by scrolling
through the list using the direction arrows then press the
"VAL" button.
A cursor on the lefthand side of the screen indicates your
position in the list. The address of the required service is displayed.
An indication on the righthand side of the screen (e.g.
1/50) indicates whether there are any other establishments
(50 maximum) which offer the same service within a radius
of approximately 30 miles (50 km), as the crow flies.
Use the
"Next"or "Previous" functions to consult the list
offered.
When the establishment of your choice is displayed, select
the "Validate" function then press the "VAL"button.
Select a guidance criterion. Guidance begins, follow the
instructions.

29-07-2002
Selecting a stored destination
Using the direction arrows, select the directory in which the
address you are looking for is stored, then press the "VAL"
button.
The stored addresses are displayed.
A cursor on the lefthand side of the screen indicates your
position in the list. Select a name by scrolling through the
list using the direction arrows, then press the "Val"button.
The complete address is displayed. Select the "Validate"
function then press the "Val"button. Select a guidance cri
terion. Guidance begins, follow the instructions.
YOUR 406 IN DETAIL
102
Storing an address in a directory
When a new address is entered, you can store it by select
ing the "Store" function.
Enter the name for the address. If the name already exists
for a different address, you can replace the old address
with a new one.
Select the Personal directory or the Professional directory
then press the "VAL"button. The address is then stored in
the directory of your choice.

29-07-2002
YOUR 406 IN DETAIL103
Display configuration
From the general menu, the "Configure display"menu
gives access to the following parameters:
Adjustment of the brightness and the video display.
Adjustment of the date and time.
Selection of the language of the display and voice infor mation (English, German, Spanish, French, Italian).
Adjustment of the mode and units. This allows selection of the display in km/h or mph, in degrees Celsius or
Fahrenheit and selection of the time format (12 or 24
hour mode). Navigation options
From the main menu, the
"Navigation options"menu
gives access to the following parameters:
Management of the directories. It enables an address stored under a name to be renamed or deleted. To do
this, select the directory and the name to be changed.
Voice synthesis volume adjustment.
Deletion of all data stored in the two directories.

29-07-2002
YOUR 406 IN DETAIL
104
Guidance tools
Access to the "Guidance tools" menu is by pressing the
"Val" button during guidance.
It enables:
the current guidance criterion to be changed,
the programmed destination to be displayed or changed,
the voice synthesis volume to be adjusted,
the current guidance to be stopped.

29-07-2002
Automatic operation1 Temperature adjustment
The value requested is displayed (from 15 to 30: comfortable te mpera
ture = 22).
Press the up and down arrows to adjust. 2 Automatic
comfort
programme
Press the " AUTO" button. The sys
tem automatically adjusts the tem
perature to that selected, by starting
the air conditioning if necessary.
It also manages the air flow and
intake, to ensure sufficient air circu
lation inside the vehicle.
Adjustment of the air distribution
must be carried out manually when
you require it.
3 Automatic visibility
programme
In certain cases, the automatic com
fort programme can prove inade
quate to deice or demist the win
dows (humidity, many passengers,
ice). In such cases, select the auto
matic visibility programme to
rapidly clear the windows.
The system automatically manages
the air conditioning, the air flow and
the air intake, distributing the air to
the windscreen and side windows.
AUTOMATIC AIR CONDITIONING
YOUR 406 IN DETAIL
60