2002.5 Peugeot 406 display

RDS
Using the RDS (Radio Data System) function on FMRadio Data System allows you to continue listening to the sa me station, whatever frequency it is using for the
region you are going through.
Briefly press the " RDS" button to switch the function on or off;
the display will show: "RDS" if the function is selected.
"(RDS)" if the function is selected but not available.
RDS station following
The display indicates the name of the station selected. The radio is continually searching for the station which has the best
reception and which is transmitting the same programme.
Traffic information programme
Press the "TA" button to switch the function on or off.
The display will show: " TA " if the function is selected,
"(TA)" if the function is selected but not available.
Any traffic information flash will be given priority, whatever source you are listening to (radio, cassette or CD changer).
If you wish to interrupt a message, press the " TA" button; this switches the function off.
Note: the volume of traffic information announcements is inde pendent of the volume of normal radio listening. You
can adjust it using the volume button. The setting will be stored and will be used when the next messages are
broadcast.
YOUR 406 IN DETAIL
78
29-07-2002

Regional following modeWhen they are part of a network, certain stations broadcast regi onal programmes in the various areas they
serve. With regional following mode you can keep listening t o the same programme.
Press the " RDS" button for more than two seconds to switch the function on or off.
PTY function This allows you to listen to stations broadcasting a specific t ype of programme (news, culture, sport, rock
etc.).
With FM selected, press the " TA" button for two seconds to switch this function on or off.
To search for a PTYprogramme:
select the PTYfunction,
briefly press button Kor Lto scroll down the list of the various types of pro
grammes offered.
when the programme of your choice is displayed, keep button Kor Lpressed for two seconds to carry out an automatic
search (after an automatic search the PTYfunction is switched off).
In PTY mode the different types of programmes can be stored in the
memory. To do this, press the preselection buttons " 1" to " 6" for more
than two seconds.
To recall the type of programme stored in the memory, briefly press
the corresponding button.
EON system
This connects stations which are part of the same network. It en ables the broadcast of traffic information by a station, which
is part of the same network as the station to which you are li stening.
This service is available when you have selected the TA traffic i nformation programme or the PTYfunction.
YOUR 406 IN DETAIL 79
29-07-2002

29-07-2002
Adjusting the bassWhen "BASS" is displayed, press button Hor Ito vary the setting.
"BASS –9" for a minimum bass setting,
"BASS 0" for a normal setting,
"BASS +9" for a maximum bass setting.
Adjusting the treble
When " TREB" is displayed, press button Hor Ito vary the setting.
"TREB –9" for a minimum treble setting,
"TREB 0" for a normal setting,
"TREB +9" for a maximum treble setting.
Adjusting the loudness
This function automatically emphasises bass and treble tones whe n the volume is low.
Press button Hor Ito switch the function on or off.
Adjusting the front/rear sound distribution (Fader)
When "FAD" is displayed, press button Hor Ito vary the setting.
Button Hincreases the volume in the front.
Button Iincreases the volume in the rear.
Adjusting the right/left sound distribution (Balance)
When "BAL" is displayed, press button Hor Ito vary the setting.
Button Hincreases the volume on the righthand side.
Button Iincreases the volume on the lefthand side.
Automatic volume correction "CAV"
This function enables the volume to be automatically adapte d depending on the level of noise produced by the speed of the vehicle.
Press buttons Hor I to switch the function on or off.
YOUR 406 IN DETAIL 87

29-07-2002
Manual station searchPress the "MAN"button.
Briefly press button Kor Lto increase or decrease the frequency displayed.
By continuing to press the button in the direction selected, you will obtain continuous scrolling of the frequency.
The scrolling stops at the first station found as soon as the button is released.
Pressing the "MAN"button again returns you to automatic station search.
Manual storing of stations in the memory Select the station required.
Press one of the buttons "1"to "6" for more than two seconds.
The sound stops then becomes audible again, confirming that the station has been stored in the memory.
Automatic storing of FM stations in the memory (autostore) Press buttonBfor more than two seconds, to automatically store the 6 station s with the strongest signal in
FM. These stations are stored in the FM3 waveband.
If it is not possible to find 6 stations, the remaining me mories are empty.
Recalling stations stored in the memory
For each waveband, briefly press buttons "1"to "6" to recall the corresponding station.
YOUR 406 IN DETAIL 89

RDS
Using the RDS (Radio Data System) function on FMRadio Data System allows you to continue listening to the sa me station, whatever frequency it is using for
the region you are going through.
Briefly press the " RDS" button to switch the function on or off; the display wil l show:
"RDS" if the function is selected.
"(RDS)" if the function is selected but not available.
RDS station following
The display indicates the name of the station selected. The radio is continually searching for the station which has the best
reception and which is transmitting the same programme.
Traffic information programme
Press the "TA"button to switch the function on or off.
The display will show: "TA" if the function is selected,
" (TA) " if the function is selected but not available.
Any traffic information flash will be given priority, whatever source you are listening to (radio, CD or CD changer).
If you wish to interrupt a message, press the "TA"button; this switches the function off.
Note: the volume of traffic information announcements is inde pendent of the volume of normal radio listening. You
can adjust it using the volume button. The setting will be stored and will be used when the next messages are broad
cast.
Regional following mode
When they are part of a network, certain stations broadcast regi onal programmes in the various areas they
serve.
With regional following mode you can keep listening to th e same programme.
Press the " RDS" button for more than two seconds to switch the function on or off.
YOUR 406 IN DETAIL
90
29-07-2002

PTY functionThis allows you to listen to stations broadcasting a specific t ype of programme (news, culture, sport, rock etc.)
With FM selected, press the "TA"button for two seconds to switch this function on or off.
To search for a PTYprogramme:
select the PTYfunction,
briefly press button Kor Lto scroll down the list of the various types of pro
grammes offered.
when the programme of your choice is displayed, keep button Kor Lpressed for two seconds to carry out an automatic
search (after an automatic search the PTYfunction is switched off).
In PTY mode the different types of programmes can be stored in the
memory. To do this, press the preselection buttons " 1" to " 6" for more
than two seconds. To recall the type of programme stored in the
memory, briefly press the corresponding button.
EON system
This connects stations which are part of the same network. It en ables the broadcast of traffic information by a station, which
is part of the same network as the station to which you are li stening.
This service is available when you have selected the TA traffic i nformation programme or the PTYfunction.
YOUR 406 IN DETAIL 91
29-07-2002

29-07-2002
THE SATELLITE NAVIGATION
SYSTEM
Introduction
The satellite navigation system guides
you to the destination of your choice
by means of vocal and visual instruc
tions.
The heart of the system lies in the use
of a map database and GPS (Global
Positioning System). This enables
your position to be located by means
of several satellites.
The satellite navigation system con
sists of the following components:
the remote control,
the display,
the control unit,
the last voice message recall control,
the CD ROM.
Some functions or services
described in this guide may vary depending on the CD ROM version or the country.The remote control
There is a storage compartment for the remote control in front of the ashtray.
Pointing the remote control at the screen enables the informat ion contained in
the various menus to be selected.
Direction arrows:
These enable you to move around the screen and
thus select a function.
On the welcome screen only, the Up and Down
buttons enable the brightness of the screen to be
adjusted.
menu : this button allows access to the main menu. It can
be used at any time.
esc : escape button
"Short press": cancels the current operation and
returns to the previous screen.
"Press for more than 2 seconds": returns to the
welcome screen.
This button can be used in any menu. It is inactive
during guidance.
mod : mode button
"Short press": changes between date, navigation
and radio.
val : Confirmation button
Confirms the function selected.
YOUR 406 IN DETAIL 95

29-07-2002
The display
When the menus are used, the functions which appear at
the bottom of the screen are presented in various ways:
1.Function selected.
2. Function inaccessible in this situation.
3. Function accessible.
Note: The "List" function can hold a maximum of
80 addresses. During guidance the screen displays different information
depending on the manoeuvres to be carried out:
1.
Distance to next manoeuvre.
2. Next manoeuvre to be carried out.
3. Next road to take.
4. Time.
5. Exterior temperature.
6. Current road.
7. Distance to final destination.
8. Manoeuvre to be carried out.
YOUR 406 IN DETAIL
96
12
875
3
12364