2002.5 Peugeot 307 Break audio

09-09-2002
YOUR 307 IN DETAIL65
Making a call Press buttonDto display the contextual menu of the telephone.
Note: pressing the end 5of the steering column control for more than 2 seconds calls
up a contextual menu limited to the "Directory" and "List of calls" functions.
Entering a number Select the function ''Enter number''then enter the number of the person you wish to speak to usin g the alphanu
meric keypad.
Press button Dto make the call.
Making a call from a directory
Select the "Directory" function to access all the files containing a telephone nu mber or the "List of calls" function to access
the list of the last ten incoming (if the number display opt ion is active) or outgoing calls.
Note: there are two directories, the RT3 audio/telephone directory and the SIM card directory. To consult the SIM directory,
insert your SIM card and enter you PIN code.
Receiving a call When a ringing sounds to let you know that a call is waiti ng, you can choose either to accept it by pressing but
ton Dor the end of the steering wheel remote control or not to a ccept it by pressing the button Qor by selecting
and validating the "NO"button from the "Answer?"menu.
If you accept the call, to end your communication, press button Q.

09-09-2002
YOUR 307 IN DETAIL
68
Services* Press button Eto display the "Services"menu and select one of the following services:
• "Customer Contact Centre" which enables you to contact the PEUGEOT Customer Contact Centre directly
and access the services offered (this type of call is suspended if a n emergency or breakown call is made).
• "Peugeot Assistance" which enables you to contact the call centre which controls the PEUGEOT breakdown ser
vice directly and receive rapid assistance (you have 6 seconds within which to cancel the call when it is made).
During the breakdown call phase it is not possible to make an y other calls with the exception of emergency calls.
• "Operator services" which gives access to the list of services specific to the operator (e .g.: customer service, consump
tion monitoring, news, stock market, weather, travel, games, etc) if they are available.
Note: during connection to a service, it is not possible to receive cal ls or SMS mini messages, they will be diverted to your
voice message service. Contrarily, it is possible to send a call wh ich results in automatic disconnection.
Emergency call*
In an emergency, press button Vuntil a signal is heard and a call validation / deletion screen is displayed (delay of
6 seconds) or enter 11 2directly.
Note: in this case, a green diode flashes on the RT3 audio/tele phone panel when the emergency call procedure begins then
lights permanently when the call is taken by the emergency services.
In the absence of a specific service contract, the parameters of th e SOS button are set so that a call is made to 11 2 unique
number made available by the worldwide GSM network, reserved for e mergency calls.
Before making a call of this kind, the audio/telephone must detect a cellular network. No security mode is required and,
depending on the network, you do not need to insert your SI M card or enter your PIN.
If you have signed the specific contract, refer to its general co nditions.
* If option and service available.

YOUR 307 IN DETAIL69
Voice commands
The voice commands make it possible to use prerecorded words or phrases to control a certain number of functions of the
RT3 audio/telephone.
Activation of the voice commands
Press the button on the end of the lights stalk to activate this function.
Example: to recall the radio station stored on button 3, the key words are: "Radio" "Memory" "3" .
To use these key words, you must say the word "Radio", wait for the audible confirmation signal, then say the w ord
"Memory" , wait for the audible confirmation signal, then end wit h the word"3", wait for the audible confirmaton signal which
will carry out the action requested.
Notes:
in the absence of any voice commands, this function will be sw itched off after approximately ten seconds,
if a command is not understood, a double audible signal i s emitted.
Saying the word "Help"displays all of the commands available on the screen.
List of
commands available
To change the source (Radio, CD, CD changer, telephone) : "RADIO" / "CD" / "CHANGER" / "CALL"
For the radio: "LISTEN" / "PREVIOUS" / "FOLLOWING" / "MEMORY" + N° / "AUTOSTORE"
For the CD: "LISTEN" / "PLAY" / " PREVIOUS TRACK" / "FOLLOWING TRACK" / "TRACK NUMBER" + N° / "SHUFFLE" / "SCAN" /
"LOOP"
for the CD changer: "LISTEN"/ "PLAY" / " PREVIOUS TRACK" / "FOLLOWING TRACK" / "TRACK NUMBER" + N° / "PREVIOUS DISC" / "FOL
LOWING DISC" / "DISC NUMBER" + N° / "SHUFFLE" / "SCAN" / "LOOP"
For the telephone: "CALL" / "REPEAT" / " PEUGEOT SERVICE"
For the navigation/card: "STOP GUIDANCE" / "RESTART GUIDANCE" / "REDUCE ZOOM " / "INCREASE ZOOM "
Various: "CANCEL" / "HELP"
09-09-2002

09-09-2002
YOUR 307 IN DETAIL73
Dial; this has two functions:
– Rotation of the dial:
This allows you to move roundthe screen and thus select a function.
It also allows you: – with a 'setting' type parameter, after selection, to increase or decreasethe
value,
– with a 'list'type parameter, to open the list and scroll throughthe values.
– with map guidance, to increase the zoom
– Pressing the dial:
This allows:
– access to the list of controls (contextual menu) of the permanent disp lay, if
there is no other display superimposed.
– confirmation of the selected function or the modified value.
– selection of a 'setting' or 'list' type parameter for modification.
"MODE" button:
– brief press: modification of permanent display (audio system, navi gation / guid
ance...),
– Press for more than two seconds displays general information.
'ESC' button:
– brief press: cancellingof operation in progress or erasingof last superim
posed display.
– pressing for more than two seconds: erasing of all superimposed d isplays and
return to the permanent display.
'MENU' button:
– Brief press: access to the general menu.
– Press for more than two seconds: acces to the help menu.
The control pad
This lets you select and validate the
functions, controls and programmes
displayed.
The control pad is an integral part of
the RT3 radio/telephone.

09-09-2002
YOUR 307 IN DETAIL
74
Select the Navigation/Guidance icon
using the dial, then validate by press
ing the dial to access the main “Nav
igation Guidance” menu.
General menu
Switch on the RT3 audio/telephone
and insert the navigation CD ROM.
Press the "MENU"button to access
the general menu .
During guidance, if the navigation CDROM is present, the scre en displays
different information depending on the manoeuvres to be carri ed out.
1 . Current manoeuvre or compass.
2 . Next manoeuvre to be carried out.
3 . Next road to be taken.
4. Current road.
5. Estimated time of arrival at destination.
6. Distance to final destination.
7. Distance to next manoeuvre.
Notes:
depending on the situation of the vehicle and on the reception of the GPS
information, this information may disappear from the screen tempora rily,
during guidance, it is only possible to listen to a CD if the vehicle is fitted with
a CD changer.
General notes on the display
12
765
123
7654
4
3
Monochrome screen CT Colour screen DT

09-09-2002
YOUR 307 IN DETAIL79
The menu ''Guidance options'' pro
vides access to the following func
tions:
changing of the route calculation criteria,
voice synthesis adjustment of guid ance messages,
description of the information relat ing to the navigation CDRom,
management of the addresses stored in the directory.
Guidance options
The last criteria used are displayed.
Select a criterion from the list, then
validate by pressing the dial.
When the criterion of your choice has
been selected, select the
"OK"func
tion then confirm by pressing the
dial.
Adjusting the voice synthesiser
Select the type of voice "male"or
"female" , after inserting the configu
ration CDROM.
Adjust the volume of the voice syn
thesis by turning the dial, then vali
date by pressing the dial.
Note: the volume can also be adjust
ed during a message, using the
audio/telephone button on the steer
ing wheel control. Management of the directory
This function enables you to rename
or delete an address stored in the
directory.
Select the description corresponding
to the stored address to be changed.
Select the
"Delete" function or the
"Rename" function, then confirm by
pressing the dial.
Select the "OK" function, then con
firm by pressing the dial to record the
changes made.
Stopping / Resuming guidance
"Stop guidance"
During guidance, select this function
then validate.
"Resume guidance"
In the absence of guidance select
this function then validate to activate
guidance to the last destination pro
grammed.
Calculation criteria

09-09-2002
PRACTICAL INFORMATION
152
Fuse no. Rating
Functions
9 30 AElectric windows Press operation windows (incompatible with nonp ress operation windows)
Sunroof.
10 15 A Diagnostic socket 12 volt rear socket.
11 15 A Audio equipment Multi–function display Steering wheel cont rols Automatic gearbox.
12 10 A Front right and rear right side lights Number plate and trai ler lighting Central locking switches light
ing/ alarm/hazard warning lights Air conditioning/ashtray ligh t Automatic gearbox switches lighting
Lighter Headlamp beam corrector.
14 30 A Door opening/closing controls Deadlocking controls.
15 30 A Rear windows.
16 5 A Engine fuse box Alarm Particulate emission filter Steering whee l controls Air bags.
17 10 A Rear right brake light, 3rd brake light.
18 10 A Diagnosic socket Steering wheel controls Brake pedal (stop) and cl utch switches Coolant level
switch Second brake switch.
19 30 A PARC shunt.
22 10 A Front left and rear left side lights
Number plate and trailer lighting.
23 15 A Alarm siren Interior alarm control unit.
24 15 A Instrument panel Audio equipment Multifunction display Air conditioning Rear parking aid.
26 30 A Heated rear screen.

09-09-2002
CHANGING A WINDSCREEN
WIPER BLADE
Placing the wiper blades in the
maintenance position Within one minute of switching off
the ignition, operate the wipers
stalk to position the wiper blades
in the centre of the windscreen
(maintenance position).
Changing a wiper blade Lift the wiper arm, then unclip the
blade and remove it.
Fit the new blade and push back
the arm.
Note : the shortest blade is fitted on
the vehicle's righthand windscreen
wiper arm.
To return the windscreen wipers
to their normal position, switch on
the ignition and operate the wiper
stalk. ECONOMY MODE FUNCTION
After the engine has stopped, certain
functions (windscreen wiper, electric
windows, sunroof, courtesy lights,
audio equipment etc.) can only be
used for thirty minutes, to prevent
discharging the battery.
After thirty minutes, the message
"Economy mode active"
appears
on the multi–function display and the
active functions are put on standby.
To resume use of these functions,
start the engine and let it run for a
few seconds. LOAD REDUCTION FUNCTION
When driving, certain functions (air
conditioning, heated rear screen,
heating system for passenger com
partment of diesel vehicles, etc.)
may be switched off temporarily,
depending on the level of battery
charge.
Reactivation of these functions is
automatic, once the battery charge is
sufficient.
Note:
at the risk of discharging the
battery, the functions that have been
switched off may be reactivated
manually.
PRACTICAL INFORMATION 155
A flat battery will prevent
the engine from starting.