Page 43 of 185
09-09-2002
CASSETTE: AUDIO RB3
Selecting cassette modeWhen a cassette is inserted, the cassette player will start auto matically.
If a cassette is already inserted, press the "SRC"button until cassette mode is selected.
Note: before inserting the cassette, ensure that the tape is taut.
Ejecting the cassette Fully press buttons C and Dto eject the cassette from the player.
Direction of play
The player will play sides 1 and 2 of the cassette alternate ly, by automatically reversing the direction of play at the en d of a
side.
To manually reverse the direction of play, press buttons Cand D half–way.
Fast forward/rewind
Fully press button Cor D to fast forward or rewind the cassette. At the end of the fa st forward/rewind, the set plays the cur
rent side.
Recommendations for using casssettes
Use good quality cassettes.
Avoid the use of cassettes which play for longer than 90 minu tes.
Never expose the cassettes to heat or the direct rays of the sun.
Re tighten the tape if necessary before inserting the cassette into the player.
Clean the playing head regularly with a damp–type cleanin g cassette.
YOUR 307 IN DETAIL
48
Page 44 of 185
09-09-2002
CD CHANGER
Selecting CD changer modeAudio RB3:press the"SRC" button several times in succession.
Audio RD3: press button R.
Selecting a disc
Press buttons " 1" to " 5" of the CD changer or the radio to select the corresponding d isc.
Selecting a track Press button Ito select the next track.
Press button Jto return to the start of the current track or to select the previ ous track.
Accelerated play
Press and hold button Ior Jfor forwards or backwards accelerated play.
Accelerated play stops as soon as the button is released.
Shuffle (RDM)
When the CD changer is selected:
audio RB3: press and hold the "SRC" button for two seconds;
audio RD3: press and hold button R for two seconds.
The tracks will be played in random sequence. Pressing the butto n again for two seconds returns you to normal play.
YOUR 307 IN DETAIL
50
Page 45 of 185
09-09-2002
YOUR 307 IN DETAIL
40
AUDIO RD3
Function Stalk movement
1 – Press (behind) Increase volume.
2 – Press (behind) Decrease volume.
1 + 2 –
Simultaneous pressSound cut off (mute); restoring of the sound by pressing any butto n.
3 – Press Automatic search of higher frequencies (radio)
Selection of the next track (CD).
4 – Press Automatic search of lower frequencies (radio)
Selection of the previous track (CD).
5 – Press the end Change of source (radio/cassette/CD changer).
6 – Rotation (clockwise) Selection of next station stored in the memo ry (radio)
Selection of following CD.
7 – Rotation Selection of previous station stored in the memory (rad io)
(anti clockwise) Selection of previous CD.
Page 47 of 185
09-09-2002
RADIO
Notes on radio reception
Your car radio is subject to phenomena which do not affect domestic radio sets. Both AM (MW/LW) and FM reception are
subject to various forms of interference. This is no reflection on the quality of the equipment, but is due to the nature of the
signals and the way in which they are transmitted.
On MW/LW, interference may be noticed when passing under high voltage power lines or bridges, or in tunnels.
On FM, interference may be the result of increasing distance from the transmitter, deflection of the signals by obstacles
(mountains, hills, buildings, etc.), or of being in an area which is not covered by a transmitter.
Selecting radio mode
Audio RB3:press the"SRC" button several times in succession.
Audio RD3: press button P.
Selecting a waveband
Audio RB3:briefly press the "BND/AST"button to select the FM1, FM2, FMast and AM wavebands.
Audio RD3: briefly press button Pto select the FM1, FM2, FMast and AM wavebands.
Automatic station search Briefly press button Ior Jto search for the station immediately above or below. By continu ing to
press the button in the direction selected, you will obtain continuous scrolling of the frequency.
The scrolling stops at the first station found as soon as the button is released.
If the TAtraffic programme is selected, only stations broadcasting this type of programme are
selected.
Searching for a station occurs first in " LO" sensitivity (selection of the most powerful transmitters) during scan ning of the
waveband, then in " DX" sensitivity (selection of the weakest and most distant transmitte rs).
To make a direct search in " DX" sensitivity, press button I or Jtwice.
YOUR 307 IN DETAIL
44
Page 48 of 185
09-09-2002
Manual station search
Press the "MAN" button.
Briefly press button Ior Jto increase or decrease the frequency displayed.
By continuing to press the button in the direction selected, you will obtain continuous scrolling of the frequency.
The scrolling stops at the first station found as soon as the button is released.
Pressing the " MAN" button again returns you to automatic station search.
Manual storing of stations in the memory
Select the station required.
Press one of the buttons " 1" to " 6" for more than two seconds.
The sound stops then becomes audible again, confirming that the station has been stored in the memory.
Automatic storing of FM stations in the memory (autostore)
Audio RB3:press and hold the "BND/AST" button for more than two seconds.
Audio RD3: press and hold button "P" for more than two seconds.
Your radio automatically stores the 6 stations with the stronge st signal in FM. These stations are stored in the FMast wave
band.
If it is not possible to find 6 stations, the remaining memo ries are empty.
Recalling stations stored in the memory
For each waveband, briefly press buttons " 1" to " 6" to recall the corresponding station.
YOUR 307 IN DETAIL 45
Page 50 of 185
09-09-2002
PTY function: Audio RD3
This allows you to listen to stations broadcasting a specific t ype of programme (news, culture, sport, rock etc.).
With FMselected, press the " TA" button for two seconds to switch this function on or off.
To search for a PTYprogramme:
select the PTYfunction,
briefly press button Ior Jto scroll down the list of the various types of programmes offered .
when the programme of your choice is displayed, keep button Ior Jpressed for two seconds
to carry out an automatic search (after an automatic search the PTYfunction is switched off).
In PTY mode the different types of programmes can be stored in the memory . To do this, press the preselection buttons "1"
to " 6" for two seconds.
Briefly press the corresponding button to recall the type of prog ramme stored in the memory.
EON system: Audio RD3
This connects stations which are part of the same network. It en ables the broadcast of traffic information, by a station that is
part of the same network as the station to which you are liste ning.
This service is available when you have selected the TAtraffic information programme or the PTYfunction.
YOUR 307 IN DETAIL 47
Page 51 of 185
09-09-2002
COMPACT DISC: AUDIO RD3
Selecting CD modeAfter insertion of a disc, printed face upwards, the player start s automatically.
If a disc is already inserted, press button Q.
Ejection of a disc Press button Sto eject the disc from the player.
Selecting a track Press button Ito select the next track.
Press button Jto return to the start of the current track or to select the previ ous track.
Accelerated play
Press and hold button Ior Jfor forwards or backwards accelerated play. Accelerated play stops as so on as the button is
released.
Shuffle (RDM)
When the CD player is selected, press and hold button Q for two seconds.
The tracks will be played in random sequence. Pressing the butto n again for two seconds returns you to normal play.
Shuffle mode is de activated each time the set is switched off.
YOUR 307 IN DETAIL 49
The use of copied compact discs may cause faults.
Insert circular compact discs only.
Page 52 of 185
09-09-2002
YOUR 307 IN DETAIL51
Stalk movement
Function
1 Press (behind) Increase volume
2 Press (behind) Decrease volume
1+2 Press together Switch off sound (mute); restore sound by pressing any button
3 Press Automatic search of upper frequencies (radio) Selection of next track (CD/CD changer)
Continuous pressure until release: fast forwards (CD/CD changer)
4 Press Automatic search of lower frequencies (radio) Selection of previous track (CD/CD changer)
Continuous pressure until release: rewind (CD/CD changer)
5 Press end Change source (radio/CD/CD changer) Confirmation of se lection (on a menu or screen)
Call connect/Call disconnect (Tel./incoming call Call disconn ect (Tel./Engaged)
Press for more than 2 seconds: display contextual menu (Tel./Not en gaged)
6 Rotation (clockwise) Selection of higher station stored in memory or storing in memory in position 1 for station not in
memory (radio) Selection of following CD Selection of followi ng item (on a menu or screen)
7 Rotation Selection of lower station stored in memory or storing in memory in position 6 for station not
(anti clockwise) in memory (radio) Selection of previous CD Selection of following i tem (on a menu or screen)
AUDIO/TELEPHONE RT3
