2002.5 Peugeot 307 Break reset

09-09-2002
1 Rev counter.
2 Seat belt not fastened warning
light.
3 Engine diagnostics warning
light.
4 Handbrake and low brake fluid
level warning light.
5 Lefthand direction indicator.
6 Coolant temperature indicator. 7
Battery charge warning light.
8 Central (STOP) warning light.
9 Engine oil pressure warning
light.
10 Low fuel level warning light.
11 Righthand direction indicator.
12 Fuel gauge.
13 ABS warning light. 14
Air bag warning light.indicator
light.
16 Speedometer.
17 Service indicator, oil level and
total distance recorder.
18 Trip recorder zero reset.
19 Rear fog lamp indicator light.
20 ESP/ASR warning light
21 Front fog lamps indicator
light.
22 Diesel engine preheating light.
23 Main beam headlamps
indicator light.
24 Low coolant level warning light.
25 Dipped beam headlamps
indicator light.
26 Water in diesel filter warning
light.
27 Lighting rheostat.
INSTRUMENTS AND CONTROLS
28
PETROL / DIESEL INSTRUMENT PANEL DIALS: MANUAL GEARBOX

09-09-2002
INSTRUMENTS AND CONTROLS29
1
Rev counter.
2 Seat belt not fastened warning
light.
3 Engine diagnostics warning
light.
4 Handbrake and low brake fluid
level warning light.
5 Lefthand direction indicator.
6 Coolant temperature indicator. 7
Battery charge warning light.
8 Central (STOP) warning light.
9 Engine oil pressure warning
light.
10 Low fuel level warning light.
11 Righthand direction indicator.
12 Fuel gauge.
13 ABS warning light. 14
Air bag warning light.
15 Passenger air bag disarming
indicator light.
16 Speedometer.
17 Service indicator, oil level and
total distance recorder.
18 Trip recorder zero reset.
19 Rear fog lamp indicator
light.
20 ESP/ASR warning light
21 Front fog lamps indicator light.
22 Main beam headlamps indicator
light.
23 Low coolant level warning light.
24 Dipped beam headlamps
indicator light.
25 Lighting rheostat.
26 Sport programme indicator light.
27 Snow programme indicator
light.
28 Gear lever position indicator.
PETROL INSTRUMENT PANEL DIALS: AUTOMATIC GEARBOX

09-09-2002
Instrument panel display
After switching on the ignition, three functions are shown in succession:
service indicator (see corresponding section),
engine oil level indicator,
total distance recorder (total and trip distances).
Note : the total and trip distances are displayed for 30 seconds wh en the ignition
is switched off, on opening the driver's door, as well as on locking and unlocking
the vehicle.
Engine oil level indicator
When the ignition is switched on, the engine oil level is indicated for approxi
mately 10 seconds, after the servicing information.
Maximum
Check the level using the dipstick to confirm whether the displ ay
is correct; a surplus of oil can cause damage to the engine.
Contact a PEUGEOT dealer without delay.
Minimum
Check the level with the dipstick and top it up. The figu re shown
is only correct if the vehicle has been on stable, level ground , with
the engine stopped, for 10 minutes.
Oil level gauge fault
Flashing of the segments, the square or of "min" and "max" indi
cates a fault in the oil level gauge.
There is a risk the engine will be damaged.
Contact a PEUGEOT dealer. Lighting rheostat
With the lights on,
press the button to
vary the intensity of
the lighting of the
instrument panel and
the multifunction dis
play. When the light
ing reaches the minimum (or maxi
mum) setting, release the button
then press it again to increase (or
reduce) the brightness.
As soon as the lighting is of the
required brightness, release the but
ton.
Trip recorder zero
reset
With the ignition on,
press the button.
INSTRUMENTS AND CONTROLS
34

09-09-2002
YOUR 307 IN DETAIL
64
Inputting the PIN code Input your PIN code using the alphanumeric keypad and validate by pressing buttonGor but
ton # to access the network. Connection to the network is vali dated by the appearance of a sym
bol on the screen.
Warning: if you make three errors in succession when inputting your PIN code, your SIM card
will be blocked. To unblock it, you will need to input t he PUK code. The PUK code will be sup
plied to you by the person selling your SIM card (input of the PUK code allows for 10 errors in
succession; after this the SIM card becomes permanently unusable).
Note: the PIN code is required each time the ignition is switched o n, unless the PIN code has
been stored in the memory or protection by PIN code is not activat ed on the SIM card.
Cancelling of PIN code request
In the menu ''Telephone functions'' select''SIM card security'' , then''Process the PIN code'' , then validate the ''Cancel''
function.
Warning: in this case, do not lose your SIM card. Losing it would mean a nyone who finds it would be able to make unlimited calls.
Telephone function screens Not in use
This screen indicates the presence of voice messages or minimessages (SMS) no t lis
tened to, the cumulatve time in use since the last zero reset a nd the status of your tele
phone.
In use
This screen indicates the time elapsed since the start of the co nversation, as well as the
number* or name of the person to whom you are speaking (if recorde d in the index) and
the status of your telephone.
* If this option and service are available.

09-09-2002
YOUR 307 IN DETAIL
66
Mini messages (SMS)
Accessing mini messages When the buzzer sounds (if the SMS mini messages buzzer option is acti ve) and a
superimposed screen announces "Do you wish to read the new mini message
(SMS)?" , you can choose to read the mini message received by selecting an d validat
ing "YES" or postpone reading it by selecting and validating "NO", by pressing the
"ESC" button or by waiting unti the announcement disappears.
Note: the old mini messages stored and the new mini messages the readi ng of which you wished to postpone can be con
sulted. Press the “MENU”button then validate the telematic icon, select “Mini messages (SMS)”and validate the function
“Reading of mini messages received” by pressing the button G. Then scroll through the list by turning the button and p ress
the button to select the mini message to be read.
Sending a mini message
Note:Before typing your first mini message, check that your mini messages (SMS) cen
tre number is stored correctly in the submenu "Server centre number". If it is not, any
mini messages typed before this number is entered will be delet ed and not sent.
In the menu "Mini messages (SMS)" validate the function "Typing of a mini mes
sage" . Type your mini message using the alphanumeric keypad and valida te it using
the "OK" button to store it or validate the "Send"button to send it.
Validation of the "Send"button enables you to enter the number of your recipient or se lect it from the directory or from the
list of calls and send the message.
"Duration of calls" menu
Select the "Duration of calls" function from the "Telephone functions" menu to consult the duration counters for the calls
made. The partial counter totals the duration of the calls since the last zero reset carried out using the "Zero reset" button.
"Telephone options" menu
Select the "Telephone options" function from the "Telephone options" menu to access the functions:
• "Configure the calls" which permits activation and deactivation of the "show my number" and "automatic answering after
X rings" functions
• "Ringing options" which permits adjustment of the ringing volume for voice calls an d activation of the mini messages
(SMS) receipt buzzer.

The contextual menu associated with
the "Navigation Guidance" applica
tion appears as a superimposed dis
play, when this is the application cur
rently in use in the main screen window.
This menu is limited to the following
functions:
changing of the initial route (enter ing of a diversion),
switching to "Selection Movement on map" mode*,
storing of the current location (postal address if available or, if it
is not, the GPS coordinates),
changing of the route calculation criteria,
stopping or resuming of guidance (displaying of the message which
changes depending on the previ
ous status).
General notes on the "Map" appli
cation*
The map guidance can be displayed
in two ways:
full screen map,
reduced size map on the righthand side and zoom image of the
junction on the lefthand side.
To switch from one to the other,
press the dial for more than two sec
onds.
To switch from one to the other,
press the knob for more than two
seconds.
The "Map" application has two oper
ating modes: "Selection Movement on
map"** mode,
"Vehicle following on map"
mode.
A "Zoom" function enables you to
enlarge the map around the selected
point, in accordance with the eleven
preset levels relating to the following
scales:
100 m/cm, 200 m/cm, 500 m/cm,
1 km/cm, 2 km/cm, 5 km/cm,
10 km/cm, 20 km/cm, 50 km/cm,
100 km/cm, 200 km/cm.
This is achieved by turning the dial. This mode permits:
selection of any point on the map
to obtain guidance towards it or to
obtain information about it (postal
address if available or, if it is not,
GPS coordinates),
lateral movement on the map by means of the four directional
arrows, representing the four cardi
nal points (North, East, South,
West),
zooming in on the map in accor dance with the eleven preset lev
els,
displaying of the "Map" contextual
menu.
YOUR 307 IN DETAIL
80
"Navigation Guidance" contextu
al menu
"Selection Movement on map"
mode**
09-09-2002

The contextual menu associated with
the "Navigation Guidance" applica
tion appears as a superimposed dis
play, when this is the application cur
rently in use in the main screen window.
This menu is limited to the following
functions:
changing of the initial route (enter ing of a diversion),
switching to "Selection Movement on map" mode*,
storing of the current location (postal address if available or, if it
is not, the GPS coordinates),
changing of the route calculation criteria,
stopping or resuming of guidance (displaying of the message which
changes depending on the previ
ous status).
General notes on the "Map" appli
cation*
The map guidance can be displayed
in two ways:
full screen map,
reduced size map on the righthand side and zoom image of the
junction on the lefthand side.
To switch from one to the other,
press the dial for more than two sec
onds.
To switch from one to the other,
press the knob for more than two
seconds.
The "Map" application has two oper
ating modes: "Selection Movement on
map"** mode,
"Vehicle following on map"
mode.
A "Zoom" function enables you to
enlarge the map around the selected
point, in accordance with the eleven
preset levels relating to the following
scales:
100 m/cm, 200 m/cm, 500 m/cm,
1 km/cm, 2 km/cm, 5 km/cm,
10 km/cm, 20 km/cm, 50 km/cm,
100 km/cm, 200 km/cm.
This is achieved by turning the dial. This mode permits:
selection of any point on the map
to obtain guidance towards it or to
obtain information about it (postal
address if available or, if it is not,
GPS coordinates),
lateral movement on the map by means of the four directional
arrows, representing the four cardi
nal points (North, East, South,
West),
zooming in on the map in accor dance with the eleven preset lev
els,
displaying of the "Map" contextual
menu.
YOUR 307 IN DETAIL
80
"Navigation Guidance" contextu
al menu
"Selection Movement on map"
mode**
09-09-2002

09-09-2002
YOUR 307 IN DETAIL81
This mode permits:
displaying of the vehicle on the map with the route proposed by the
navigation if the guidance is active,
zooming in on the map in accor dance with the eleven preset lev
els,
displaying of the "Navigation
Guidance" contextual menu.
"Vehicle following on map" mode
From the
general menu , the main
"Map" menu offers various options
for guidance management:
switching to "Selection Movement on map" mode**,
direction of the map towards the North or in the direction of the vehi
cle,
recentering of the map around the vehicle when it has disappeared **,
opening of the services selection window visible on the map,
displaying of the window for enter ing the description for recording
the current position of the vehicle
in a directory file.
Map*The contextual menu associated with
the
"Map" application and with the
"Selection Movement on map"
mode appears as a superimposed
display, when these are in use in the
main screen window.
This menu is limited to the following
functions:
displaying of the information on the location selected on the map,
selection of a location on the map as a destination,
storing of the location selected (postal address if available or, if it
is not, GPS coordinates, so that
they can be recorded in a directory
file),
switching to "Vehicle following on map" mode.
* DT colour screen only.
** During the year.
"Map" contextual menu**