2002.5 Peugeot 307 Break ECO mode

09-09-2002
YOUR 307 IN DETAIL73
Dial; this has two functions:
– Rotation of the dial:
This allows you to move roundthe screen and thus select a function.
It also allows you: – with a 'setting' type parameter, after selection, to increase or decreasethe
value,
– with a 'list'type parameter, to open the list and scroll throughthe values.
– with map guidance, to increase the zoom
– Pressing the dial:
This allows:
– access to the list of controls (contextual menu) of the permanent disp lay, if
there is no other display superimposed.
– confirmation of the selected function or the modified value.
– selection of a 'setting' or 'list' type parameter for modification.
"MODE" button:
– brief press: modification of permanent display (audio system, navi gation / guid
ance...),
– Press for more than two seconds displays general information.
'ESC' button:
– brief press: cancellingof operation in progress or erasingof last superim
posed display.
– pressing for more than two seconds: erasing of all superimposed d isplays and
return to the permanent display.
'MENU' button:
– Brief press: access to the general menu.
– Press for more than two seconds: acces to the help menu.
The control pad
This lets you select and validate the
functions, controls and programmes
displayed.
The control pad is an integral part of
the RT3 radio/telephone.

The contextual menu associated with
the "Navigation Guidance" applica
tion appears as a superimposed dis
play, when this is the application cur
rently in use in the main screen window.
This menu is limited to the following
functions:
changing of the initial route (enter ing of a diversion),
switching to "Selection Movement on map" mode*,
storing of the current location (postal address if available or, if it
is not, the GPS coordinates),
changing of the route calculation criteria,
stopping or resuming of guidance (displaying of the message which
changes depending on the previ
ous status).
General notes on the "Map" appli
cation*
The map guidance can be displayed
in two ways:
full screen map,
reduced size map on the righthand side and zoom image of the
junction on the lefthand side.
To switch from one to the other,
press the dial for more than two sec
onds.
To switch from one to the other,
press the knob for more than two
seconds.
The "Map" application has two oper
ating modes: "Selection Movement on
map"** mode,
"Vehicle following on map"
mode.
A "Zoom" function enables you to
enlarge the map around the selected
point, in accordance with the eleven
preset levels relating to the following
scales:
100 m/cm, 200 m/cm, 500 m/cm,
1 km/cm, 2 km/cm, 5 km/cm,
10 km/cm, 20 km/cm, 50 km/cm,
100 km/cm, 200 km/cm.
This is achieved by turning the dial. This mode permits:
selection of any point on the map
to obtain guidance towards it or to
obtain information about it (postal
address if available or, if it is not,
GPS coordinates),
lateral movement on the map by means of the four directional
arrows, representing the four cardi
nal points (North, East, South,
West),
zooming in on the map in accor dance with the eleven preset lev
els,
displaying of the "Map" contextual
menu.
YOUR 307 IN DETAIL
80
"Navigation Guidance" contextu
al menu
"Selection Movement on map"
mode**
09-09-2002

The contextual menu associated with
the "Navigation Guidance" applica
tion appears as a superimposed dis
play, when this is the application cur
rently in use in the main screen window.
This menu is limited to the following
functions:
changing of the initial route (enter ing of a diversion),
switching to "Selection Movement on map" mode*,
storing of the current location (postal address if available or, if it
is not, the GPS coordinates),
changing of the route calculation criteria,
stopping or resuming of guidance (displaying of the message which
changes depending on the previ
ous status).
General notes on the "Map" appli
cation*
The map guidance can be displayed
in two ways:
full screen map,
reduced size map on the righthand side and zoom image of the
junction on the lefthand side.
To switch from one to the other,
press the dial for more than two sec
onds.
To switch from one to the other,
press the knob for more than two
seconds.
The "Map" application has two oper
ating modes: "Selection Movement on
map"** mode,
"Vehicle following on map"
mode.
A "Zoom" function enables you to
enlarge the map around the selected
point, in accordance with the eleven
preset levels relating to the following
scales:
100 m/cm, 200 m/cm, 500 m/cm,
1 km/cm, 2 km/cm, 5 km/cm,
10 km/cm, 20 km/cm, 50 km/cm,
100 km/cm, 200 km/cm.
This is achieved by turning the dial. This mode permits:
selection of any point on the map
to obtain guidance towards it or to
obtain information about it (postal
address if available or, if it is not,
GPS coordinates),
lateral movement on the map by means of the four directional
arrows, representing the four cardi
nal points (North, East, South,
West),
zooming in on the map in accor dance with the eleven preset lev
els,
displaying of the "Map" contextual
menu.
YOUR 307 IN DETAIL
80
"Navigation Guidance" contextu
al menu
"Selection Movement on map"
mode**
09-09-2002

09-09-2002
YOUR 307 IN DETAIL81
This mode permits:
displaying of the vehicle on the map with the route proposed by the
navigation if the guidance is active,
zooming in on the map in accor dance with the eleven preset lev
els,
displaying of the "Navigation
Guidance" contextual menu.
"Vehicle following on map" mode
From the
general menu , the main
"Map" menu offers various options
for guidance management:
switching to "Selection Movement on map" mode**,
direction of the map towards the North or in the direction of the vehi
cle,
recentering of the map around the vehicle when it has disappeared **,
opening of the services selection window visible on the map,
displaying of the window for enter ing the description for recording
the current position of the vehicle
in a directory file.
Map*The contextual menu associated with
the
"Map" application and with the
"Selection Movement on map"
mode appears as a superimposed
display, when these are in use in the
main screen window.
This menu is limited to the following
functions:
displaying of the information on the location selected on the map,
selection of a location on the map as a destination,
storing of the location selected (postal address if available or, if it
is not, GPS coordinates, so that
they can be recorded in a directory
file),
switching to "Vehicle following on map" mode.
* DT colour screen only.
** During the year.
"Map" contextual menu**

09-09-2002
CHANGING A WINDSCREEN
WIPER BLADE
Placing the wiper blades in the
maintenance position Within one minute of switching off
the ignition, operate the wipers
stalk to position the wiper blades
in the centre of the windscreen
(maintenance position).
Changing a wiper blade Lift the wiper arm, then unclip the
blade and remove it.
Fit the new blade and push back
the arm.
Note : the shortest blade is fitted on
the vehicle's righthand windscreen
wiper arm.
To return the windscreen wipers
to their normal position, switch on
the ignition and operate the wiper
stalk. ECONOMY MODE FUNCTION
After the engine has stopped, certain
functions (windscreen wiper, electric
windows, sunroof, courtesy lights,
audio equipment etc.) can only be
used for thirty minutes, to prevent
discharging the battery.
After thirty minutes, the message
"Economy mode active"
appears
on the multi–function display and the
active functions are put on standby.
To resume use of these functions,
start the engine and let it run for a
few seconds. LOAD REDUCTION FUNCTION
When driving, certain functions (air
conditioning, heated rear screen,
heating system for passenger com
partment of diesel vehicles, etc.)
may be switched off temporarily,
depending on the level of battery
charge.
Reactivation of these functions is
automatic, once the battery charge is
sufficient.
Note:
at the risk of discharging the
battery, the functions that have been
switched off may be reactivated
manually.
PRACTICAL INFORMATION 155
A flat battery will prevent
the engine from starting.