2002.5 Peugeot 307 Break radio

09-09-2002
3YOUR 307 AT A GLANCE
1Speaker (tweeter).
2 Side window demisting vent.
3 Windscreen demisting vents.
4 Passenger air bag.
5 Brightness sensor.
6 Multifunction display.
7 Alarm button.
8 Central locking button.
9 Hazard warning lights
switch.
10 Lights and direction indica
tors stalk.
11 Instrument dials.
12 Steering wheel adjustment
control.
13 Windscreen wash/wipe
stalk.
Trip computer stalk.
14 Driver's air bag.
Horn. 15
Radio remote control stalk.
16 Headlamp height
adjustment.
17 Electric mirror controls.
Window controls.
Rear window locking
control.
18 Steering lock and ignition.
19 Cruise control switch.
20 12 V accessories socket.
21 Coin storage
Passenger air bag
disarming switch*.
22 Rubbish container.
23 Can holder.
24 Handbrake.
25 Rear footwell heating vent.
26 Gear lever.
27 Front ash tray.
28 Heating/air conditioning
controls. 29
CD changer.
30 RB3, RD3 or RT3
audio equipment.
31 Central adjustable heating/
ventilation vent and air flow
regulation.
32 Side adjustable heating/
ventilation vent and air flow
regulation.
33 Fuse box.
34 Glove box.
35 Bonnet opening control.
* According to destination.

09-09-2002
YOUR 307 IN DETAIL 35
MULTI–FUNCTION
SCREENS
Presentation
Monochrome screen B
This enables the following informa
tion to be displayed:
the time,
the date,
the outside temperature (the
°C
symbol flashes when there is a risk
of ice),
the radio displays,
the status of the openings (doors,
bonnet...),
the warning (e.g. “Battery charge
fault”) or information (e.g.
“Passenger air bag disarmed”)
messages displayed temporarily
can be cleared by pressing button
1 or 2,
the trip computer (see correspond
ing section).
Monochrome screen CT and
colour screen DT
These two systems are controlled by
the RT3 audio/telephone keypad.
They enable the following informa
tion to be displayed:
–the time,–the date,–the outside temperature (a mes
sage warns you when there is a
risk of ice),
–the audio source displays (radio,
CD, ...),
–the telematic system displays (tele
phone, services, ...),
–the status of the openings (doors,
bonnet, ...),
–the warning (e.g. “Fuel level low”)
and vehicle functions status (e.g.
“Passenger air bag disarmed”)
messages displayed temporarily,
–the trip computer display (see cor
responding section),
–the satellite navigation system dis plays (see corresponding section).
Note: to enable you to use all of your
system’s functions, you have two
CD ROMs: one, “Configuration”, con
tains the software and the various
display and spoken information lan
guages, the other, “Navigation”, con
tains the satellite navigation system
map data. Monochrome screen CT
General menu
Press the
“MENU” button to access
the general menu and select one of
the following applications:–navigation guidance (see section
“Satellite navigation system”),
–trip computer (see corresponding section),
–directory (see “RT3 audio/telephone” section),
–telematics (see “RT3 audio/telephone” section),
–configuration (see correspondingsection).

09-09-2002
AUDIO RB3
YOUR 307 IN DETAIL
38
Function
Stalk movement
1 – Press (behind) Increase volume.
2 – Press (behind) Decrease volume.
1 + 2 –
Simultaneous press Sound cutoff (mute); restoring of the sound by pressing any butto n.
3 – Press Automatic search of higher frequencies (radio)
Selection of the next track (CD).
4 – Press Automatic search of lower frequencies (radio)
Selection of the previous track (CD).
5 – Press the end Change of source (radio/cassette/CD changer).
6 – Rotation (clockwise) Selection of next station stored in the memo ry (radio)
Selection of next CD.
7 – Rotation Selection of previous station stored in the memory (rad io)
(anticlockwise) Selection of previous CD.

09-09-2002
YOUR 307 IN DETAIL39
Button
Function
A RDS RDS function on / off.
Press for more than 2 seconds: regional following mode on/off.
BT ATraffic information priority on/off.
C Press fully: cassette rewind.
D Press fully: fast forward.
C+D Press half way: reversal of direction of play of the cassette.
Press fully: ejection of the cassette.
E Increase setting of functions associated with button G.
F Decrease setting of functions associated with button G.
G Adjustment of bass, treble, loudness
,sound distribution and automatic
volume correction.
H SRC Selection of source: radio, cassette or CD changer.
Press for more than 2 seconds: CD shuffle.
I Manual and automatic search of higher frequency.
Selection of next CD track and PTY (radio).
J Manual and automatic search of lower frequency.
Selection of previous CD track and PTY (radio).
K MAN Manual/automatic operation of buttons Iand Jin radio mode.
L BND Selection of FM1, FM2, FMast and AM wavebands.
AST Press for more than 2 seconds: automatic storing of stations in the memory (autostore).
M Radio on/off. N –
Decrease volume.
O + Increase volume.
1 to 6 123456 Selection of station stored in the memory.
Press for more than 2 seconds: storing of a station in the memory.
1 to 5 12345 Selection of a CD changer disc.

09-09-2002
GENERAL FUNCTIONSOn/off
With the ignition key in the accessories or ignition position , press button Mto switch the set on or off.
The set can operate for 30 minutes without the vehicle ign ition being switched on.
Antitheft system
The audio system is coded in such a way that it can operate on ly on your vehicle. It would not function if fitted to another
vehicle.
The antitheft system is automatic and requires no action on your part.
ADJUSTING THE VOLUME
Press button Oto increase the volume, or button Nto decrease it.
Continuous pressure on buttons Oand Nallows a gradual adjustment of the volume.
AUDIO SETTINGS Press button G several times in succession to access the bass (BASS), treble(TREB), loudness (LOUD),
fader (FAD) , balance (BAL)and automatic volume correction.
Exit from audio mode is automatic after a few seconds without p ressing any button, or by pressing button G
after configuration of the automatic volume correction.
Note: bass and treble settings are specific to each source. It is possibl e to set them differently for radio, cas
sette (RB3) , CD (RD3) and CD changer.
YOUR 307 IN DETAIL
42

09-09-2002
RADIO
Notes on radio reception
Your car radio is subject to phenomena which do not affect domestic radio sets. Both AM (MW/LW) and FM reception are
subject to various forms of interference. This is no reflection on the quality of the equipment, but is due to the nature of the
signals and the way in which they are transmitted.
On MW/LW, interference may be noticed when passing under high voltage power lines or bridges, or in tunnels.
On FM, interference may be the result of increasing distance from the transmitter, deflection of the signals by obstacles
(mountains, hills, buildings, etc.), or of being in an area which is not covered by a transmitter.
Selecting radio mode
Audio RB3:press the"SRC" button several times in succession.
Audio RD3: press button P.
Selecting a waveband
Audio RB3:briefly press the "BND/AST"button to select the FM1, FM2, FMast and AM wavebands.
Audio RD3: briefly press button Pto select the FM1, FM2, FMast and AM wavebands.
Automatic station search Briefly press button Ior Jto search for the station immediately above or below. By continu ing to
press the button in the direction selected, you will obtain continuous scrolling of the frequency.
The scrolling stops at the first station found as soon as the button is released.
If the TAtraffic programme is selected, only stations broadcasting this type of programme are
selected.
Searching for a station occurs first in " LO" sensitivity (selection of the most powerful transmitters) during scan ning of the
waveband, then in " DX" sensitivity (selection of the weakest and most distant transmitte rs).
To make a direct search in " DX" sensitivity, press button I or Jtwice.
YOUR 307 IN DETAIL
44

09-09-2002
Manual station search
Press the "MAN" button.
Briefly press button Ior Jto increase or decrease the frequency displayed.
By continuing to press the button in the direction selected, you will obtain continuous scrolling of the frequency.
The scrolling stops at the first station found as soon as the button is released.
Pressing the " MAN" button again returns you to automatic station search.
Manual storing of stations in the memory
Select the station required.
Press one of the buttons " 1" to " 6" for more than two seconds.
The sound stops then becomes audible again, confirming that the station has been stored in the memory.
Automatic storing of FM stations in the memory (autostore)
Audio RB3:press and hold the "BND/AST" button for more than two seconds.
Audio RD3: press and hold button "P" for more than two seconds.
Your radio automatically stores the 6 stations with the stronge st signal in FM. These stations are stored in the FMast wave
band.
If it is not possible to find 6 stations, the remaining memo ries are empty.
Recalling stations stored in the memory
For each waveband, briefly press buttons " 1" to " 6" to recall the corresponding station.
YOUR 307 IN DETAIL 45

09-09-2002
RDS
Using the RDS (Radio Data System) function on FM
Radio Data System allows you to continue listening to the same station, whatever frequency it is using for the region you a re
going through.
Briefly press the " RDS" button to switch the function on or off.
The multi–function display wil show:
"RDS" if the function is selected.
"(RDS)" if the function is selected but not available.
RDS station following
The display indicates the name of the station selected. The radio is continually searching for the station which has the best
reception and which is transmitting the same programme.
Traffic information programme
Press the "TA" button to switch the function on or off.
The multi–function display will show:
" TA " if the function is selected,
"(TA)" if the function is selected but not available.
Any traffic information flash will be given priority, whatever source you are listening to (radio, cassette or CD changer).
If you wish to interrupt a message, press the " TA" button; this switches the function off.
Note: the volume of traffic information announcements is inde pendent of the volume of normal radio listening. You
can adjust it using the volume button. The setting will be stored and will be used when the next messages are broad
cast.
Regional following mode
When they are part of a network, certain stations broadcast regi onal programmes in the various areas they serve. With
regional following mode you can keep listening to the same programme.
Press the " RDS" button for more than two seconds to switch the function on or off.
YOUR 307 IN DETAIL
46