Page 720 of 4323
DI±518
± DIAGNOSTICSAUTOMATIC TRANSMISSION
712 Author: Date:
2005 SEQUOIA (RM1146U) Output speed sensor
Output shaft speed sensor
Input speed sensor, Input turbine speed sensor ºAº, Speed
sensor (NT), Turbine speed sensorInput turbine speed sensor
PNP switch, NSWPark/neutral position switch
Pressure control solenoidTransmission pressure control solenoid
Shift solenoidTransmission shift solenoid valve
Transmission control switch, Shift lock control unitShift lock control module
Engine immobilizer system, Immobilizer systemVehicle anti±theft system
Page 721 of 4323
DIDIK±01
D13871
Combination Meter
DLC3 Stop Light SwitchECM
Park/Neutral Position SwitchSpeed Sensor (SP2) Shift Solenoid Valve S1
Shift Solenoid Valve SR
Shift Solenoid Valve SLU
Shift Solenoid Valve SL2 ATF Temperature
Sensor No. 2Integration Control and Panel
(Shift Position L Switch) MIL
Shift Solenoid Valve SL1
Shift Solenoid
Valve SLT
ATF Temperature
Sensor No.1
Shift Solenoid Valve S2
Speed Sensor (NT)
AT Oil Temp Warning LightShift Lever
(O/D Main Switch)
4WD:
4WD Control ECU
± DIAGNOSTICSAUTOMATIC TRANSMISSION
DI±519
713 Author: Date:
2005 SEQUOIA (RM1146U)
LOCATION
Page 722 of 4323
DIDIL±01
D14205
Shift Solenoid Valve S1
MIL
(Malfunction Indicator Lamp) S1
S2
SL1
SL2
SLT
SLU
SR
WShift Solenoid Valve S2
Shift Solenoid Valve SL1
Shift Solenoid Valve SL2
Shift Solenoid Valve SLT
Shift Solenoid Valve SLU
Shift Solenoid Valve SR
OILW
AT Oil Temp Warning Light ECM Crankshaft Position Sensor
Engine CoolantTemperature Sensor
Combination Meter
Stop Lamp Switch Assy
DLC3
(Data Link Connector 3)THW VTA1, 2
VC
SPD
STPTH01
TC Throttle Position Sensor
ATF (Automatic Transmission
Fluid) Temperature Sensor No. 1Mass Air Flow Meter
Accelerator Pedal Position SensorVPA
VPA2
Shift Lever
(O/D Main Switch)
Input Speed Sensor (NT)NT
Output Speed Sensor (SP2)SP2
TH02
ATF (Automatic Transmission
Fluid) Temperature Sensor No. 2Skid Control ECUNSW
Park/Neutral Position Switch
R, D, 3, 2
VG
NE
L
ODMSIntegration Control and Panel
(Shift Position L Switch)
L4
: 4WD4WD Control ECU
CAN DI±520
± DIAGNOSTICSAUTOMATIC TRANSMISSION
714 Author: Date:
2005 SEQUOIA (RM1146U)
SYSTEM DIAGRAM
The configuration of the electronic control system in the A750E/A750F automatic transmission is as shown
in the following chart.
Page 754 of 4323
D14144
Warmed up
sufficiently
Approx.100 km/h
(62 mph)
Vehicle Speed
Approx. 80 km/h
(50 mph)
0
Normal acceleration
through all the gears from 1st to 5th
Lock±up ON
Vehicle Speed
Stop
(Idling)
Maintain a constant speed or gradual acceleration (with the throttle open)
for 3 minutes or more.
*1 DI±552
± DIAGNOSTICSAUTOMATIC TRANSMISSION
746 Author: Date:
2005 SEQUOIA (RM1146U)
HINT:
*1: Drive at such a speed in the uppermost gear, to engage lock±up. The vehicle can be driven at a speed
lower than that in the above diagram under the lock±up condition.
NOTICE:
It is necessary to drive the vehicle for approximately 30 minutes to detect DTC P0711 (ATF tempera-
ture sensor malfunction).
Page 755 of 4323
DIDIX±01
± DIAGNOSTICSAUTOMATIC TRANSMISSION
DI±553
747 Author: Date:
2005 SEQUOIA (RM1146U)
PROBLEM SYMPTOMS TABLE
HINT:
If a normal code is displayed during the diagnostic trouble code check although the trouble still occurs, check
the electrical circuits for each symptom in the order given in the charts on the following pages and proceed
to the page given for troubleshooting.
The Matrix Chart is divided into 3 chapters.
1. Chapter 1: Electronic Circuit Matrix Chart
Refer to the table below when the trouble cause is considered to be electrical.
If the instruction ºProceed to next circuit inspection shown on matrix chartº is given in the flow chart
of each circuit, proceed to the circuit with the next highest number in the table to continue the check.
If the trouble still occurs even though there are no abnormalities in any of the other circuits, check and
replace the ECM.
HINT:
*1: When the circuit on which mark *1 is attached is defective, DTC could be output (see page DI±573).
SymptomSuspect AreaSee page
No up±shift
(A particular gear, from 1st to 4th gear, is not up±shifted)1. Shift solenoid valve (S1) circuit *1
2. Shift solenoid valve (S2) circuit *1
3. ECM
DI±641
DI±646
IN±35
No up±shift (4th " 5th)
1. O/D main switch circuit
2. Engine coolant temp. sensor circuit *1
3. Speed sensor NT circuit *1
4. Shift solenoid valve (SL1) circuit *1
5. Shift solenoid valve (SL2) circuit *1
6. Shift solenoid valve (SR) circuit *1
7. ECM
DI±688
DI±58
DI±591
DI±603
DI±631
DI±651
IN±35
No up±shift (3rd " 4th)
1. Engine coolant temp. sensor circuit *1
2. Shift solenoid valve (S2) circuit *1
3. ECM
DI±58
DI±646
IN±35
No up±shift (1st " 2nd)
1. Shift position L switch circuit
2. Shift solenoid valve (S2) circuit *1
3. ECM
DI±691
DI±646
IN±35
No down±shift (5th " 4th)
1. O/D main switch circuit
2. Shift solenoid valve (SL1) circuit *1
3. Shift solenoid valve (SL2) circuit *1
4. Shift solenoid valve (SR) circuit *1
5. ECM
DI±688
DI±603
DI±631
DI±651
IN±35
No down±shift (2nd " 1st)
1. Shift position L switch circuit
2. Shift solenoid valve (S2) circuit *1
3. ECM
DI±691
DI±646
IN±35
No down±shift
(A particular gear, from 1st to 4th gear, is not down±shifted)1. Shift solenoid valve (S1) circuit *1
2. Shift solenoid valve (S2) circuit *1
3. ECM
DI±641
DI±646
IN±35
No lock±up
1. ATF temperature sensor circuit *1
2. Stop light switch circuit *1
3. Speed sensor NT circuit *1
4. Shift solenoid valve (SLU) circuit *1
5. Engine coolant temp. sensor circuit *1
6. ECM
DI±582
DI±600
DI±591
DI±680
DI±58
IN±35
No lock±up off4. Shift solenoid valve (SLU) circuit *1
6. ECM
DI±680
IN±35
Page 756 of 4323
DI±554
± DIAGNOSTICSAUTOMATIC TRANSMISSION
748 Author: Date:
2005 SEQUOIA (RM1146U) Shift point too high or too low
1. Shift solenoid valve (SLT) circuit *1
2. Speed sensor NT circuit *1
3. Speed sensor SP2 circuit *1
4. Throttle position sensor circuit *1
5. ATF temperature sensor circuit *1
6. ECM
DI±662
DI±591
DI±596
DI±58
DI±582
IN±35
Up±shift to 5th from 4th while shift lever is in 4 position1. O/D main switch circuit
2. ECMDI±688
IN±35
Up±shift to 5th from 4th while engine is cold1. Engine coolant temp. sensor circuit *1
2. ECM
DI±58
IN±35
Up±shift to 4th from 3rd while shift lever is in 3 position1. Park/neutral position switch circuit *1
2. ECM
DI±576
IN±35
Up±shift to 3rd from 2nd while shift lever is in 2 position1. Park/neutral position switch circuit *1
2. ECM
DI±576
IN±35
Up±shift to 2nd from 1st while shift lever is in L position1. Shift position L switch circuit
2. ECMDI±691
IN±35
Harsh engagement (N " D)
1. Speed sensor NT circuit *1
2. Shift solenoid valve (SL1) circuit *1
3. Shift solenoid valve (SLT) circuit *1
4. ECM
DI±591
DI±603
DI±662
IN±35
Harsh engagement (Lock±up)
1. Speed sensor NT circuit *1
2. Speed sensor SP2 circuit *1
3. Shift solenoid valve (SLU) circuit *1
4. ECM
DI±591
DI±596
DI±680
IN±35
Harsh engagement (Any driving position)ECMIN±35
Poor acceleration
1. ATF temperature sensor No.2 circuit *1
2. Engine coolant temp. sensor circuit *1
3. Shift solenoid valve (SLT) circuit *1
4. ECM
DI±666
DI±58
DI±662
IN±35
No engine brakingECMIN±35
No kick±downECMIN±35
Engine stalls when starting off or stopping1. Shift solenoid valve (SLU) circuit *1
2. ECM
DI±680
IN±35
AT Oil Temp. warning light remains on1. ATF temperature sensor No.2 circuit*1DI±666
Lock±up at 3rd gear
1. AT F temperature sensor No.2 circuit 1
2. Engine coolant temp. sensor circuit *1DI±666
DI±58
Shift point too high
2. Engine coolant tem . sensor circuit
3. ECMDI 58
IN±35
Malfunction in shifting1. Park/neutral position switch circuit *1
2. ECM
DI±576
IN±35
Page 762 of 4323
D14146
5 V/DIV
1 ms/DIVGND
D14147
GND
5 V/DIV
1 ms/DIV
DI±560
± DIAGNOSTICSAUTOMATIC TRANSMISSION
754 Author: Date:
2005 SEQUOIA (RM1146U)SLT+ (E7±13) ± SLT± (E7±12)
B±R ± G±YSLT solenoid signalEngine idle speedPulse generation
(See waveform 1)
SR (E7±9) ± E1 (E6±1)G±R ± BRSR solenoid signal5th gear10 to 14 V
===1st gearBelow 1 V
SL2+ (E7±17) ± SL2± (E7±16)GR ± LG±BSL2 solenoid signalEngine idle speedPulse generation
(See waveform 3)
SL1+ (E7±19) ± SL1± (E7±18)R±B ± LSL1 solenoid signalEngine idle speedPulse generation
(See waveform 4)
THO1 (E7±24) ± E2 (E8±28)G ± G±WNo.1 ATF temperature
sensor signalNo.1 ATF temperature: 115 C (239
F) or moreBelow 1.5 V
THO2 (E7±32) ± E2 (E8±28)V ± G±WNo.2 ATF temperature
sensor signalNo.2 ATF temperature: 115 C (239
F) or moreBelow 1.5 V
SP2+ (E7±34) ± SP2± (E7±26)W±R ± Y±RSpeed sensor (SP2) sig-
nalVehicle speed 20 km/h (12 mph)Pulse generation
(See waveform 6)
NT+ (E7±35) ± NT± (E7±27)B ± WSpeed sensor (NT) signalEngine idle speedPulse generation
(See waveform 5)
STAR/NSW (E7±8) ± E1 (E6±1)B ± BRPark neutral switch signalIG switch ON and shift lever P and
N positionBelow 2 V
===IG switch ON and shift lever except
P and N position10 to 14 V
L4* (E6±13) ± E1 (E6±1)L±R ± BRTransfer L position switch
signalIG switch ON and transfer L posi-
tionBelow 1 V
===IG switch ON and transfer except L
position10 to 14 V
HINT:
*: 4WD
Waveform 1
Reference:
TerminalSLT+ ± SLT±
Tool setting5V/DIV, 1ms/DIV
Vehicle conditionEngine idle speed
Waveform 2
Reference:
TerminalSLU+ ± SLU±
Tool setting5V/DIV, 1ms/DIV
Vehicle condition5th (lock±up) or 6th (lock±up) gear
Page 769 of 4323
DIDJ2±01
± DIAGNOSTICSAUTOMATIC TRANSMISSION
DI±567
761 Author: Date:
2005 SEQUOIA (RM1146U)
FAIL±SAFE CHART
1. FAIL±SAFE
This function minimizes the loss of the ECT functions when any malfunction occurs in a sensor or solenoid.
Malfunction PartFunction
Output Speed Sensor (SP2)During an output speed sensor malfunction, shift control is effected through the
input speed sensor signal (NT).
ATF Temp. Sensor No. 1During an ATF temperature sensor No. 1 malfunction, up±shift to the 5th and flex
lock±up clutch control are prohibited.
Shift Solenoid Valve S1, S2 and SR
The current to the failed solenoid valve is cut off and control is effected by operating
the other solenoid valves with normal operation.
Shift control is effected depending on the failed solenoid as described in the table
on the next page.
Shift Solenoid Valve SL1 and SL2During a solenoid valve SL1 or SL2 malfunction, up±shift to the 5th is prohibited.
Shift Solenoid Valve SLU
During a solenoid valve SLU malfunction, the current to the solenoid valve is
stopped. This stops lock±up control and flex lock±up control, fuel economy de-
creases.
Shift Solenoid Valve SLT
During a solenoid valve SLT malfunction, the current to the solenoid valve is
stopped. This stops line pressure optimal control, the shift shock increases. How-
ever, shifting is effected through normal clutch pressure control.
Fail Safe Function:
If either of the shift solenoid valve circuits has an open or short failure, the ECM turns the other shift solenoid
ºONº and ºOFFº in order to shift into the gear positions shown in the table below.
In case of a short circuit, the ECM stops sending current to the short circuited solenoid.
Even if starting the engine again in the fail±safe mode, the gear position remains in the same position.
