2001 TOYOTA SEQUOIA ABS

± BRAKEABS & VSC ACTUATOR
BR±49
3216 Author: Date:
2005 SEQUOIA (RM1146U)
5. CLEAR DTC (See page DI±911)

BR1NH±03
F16314
Connector
11 (112, 8)
Actuator BracketActuator CushionActuator Assembly
11 (112, 8)
1.8 (18, 16 in.´lbf)
: Specified torqueN´m (kgf´cm, ft´lbf)
19.5 (195, 14)
15 (155, 11)

Non±reusable part

19.5 (195, 14)
15 (155, 11)
15 (155, 11)
9.5 (97, 84 in.´lbf)
9.5 (97, 84 in.´lbf)
Skid Control ECU


Cushion
To left rear brake
To right front brake To right rear brake
To left front brake From master cylinder
(front port)From master cylinder
(rear port)
15 (155, 11)
1.8 (18, 16 in.´lbf)
BR±50
± BRAKEABS & VSC ACTUATOR
3217 Author: Date:
2005 SEQUOIA (RM1146U)
COMPONENTS

BR1NI±03
F16315
Release Bar
F16316
± BRAKEABS & VSC ACTUATOR
BR±51
3218 Author: Date:
2005 SEQUOIA (RM1146U)
REMOVAL
1. DISCONNECT CONNECTOR
Pull the release bar and disconnect the connector.
2. DISCONNECT BRAKE LINES
Using SST, disconnect the 6 brake lines from the actuator as-
sembly.
SST 09023±00101, 09023±38201
Torque:
10 mm nut: 15 N´m (155 kgf´cm, 11 ft´lbf)
12 mm nut: 19.5 N´m (195 kgf´cm, 14 ft´lbf)
HINT:

When disconnecting the brake lines, use tags or make a
memo to identify the place to reconnect (See page
BR±50).

At the time of installation, connect each brake line to the
correct position (See page BR±50).
3. REMOVE ACTUATOR ASSEMBLY
Remove the 3 nuts and actuator assembly with the actuator
bracket.
Torque: 11 N´m (112 kgf´cm, 8 ft´lbf)

BR1NJ±03
F13898
Sealing
Surface
BR±52
± BRAKEABS & VSC ACTUATOR
3219 Author: Date:
2005 SEQUOIA (RM1146U)
DISASSEMBLY
1. REMOVE ACTUATOR BRACKET
(a) Remove the 3 bolts and actuator bracket.
Torque: 9.5 N´m (97 kgf´cm, 84 in.´lbf)
(b) Remove the 3 cushions from the actuator bracket.
2. REMOVE SKID CONTROL ECU
Using a E5 torx® wrench, remove the 3 screws and skid control
ECU.
Torque: 1.8 N´m (18 kgf´cm, 16 in.´lbf)
NOTICE:
Protect the actuator in order to prevent sealing surface
from getting dirty and causing damage on the valve body.
If the dirt and the like is stuck to the sealing surface, use
plastic tools or soft objects to remove the dirt. Do not use
chemical solvents.

BR1NK±02
± BRAKEABS & VSC ACTUATOR
BR±53
3220 Author: Date:
2005 SEQUOIA (RM1146U)
REASSEMBLY
Reassembly is in the reverse order of disassembly (See page BR±52).

BR1NL±04
BR±54
± BRAKEABS & VSC ACTUATOR
3221 Author: Date:
2005 SEQUOIA (RM1146U)
INSTALLATION
Installation is in the reverse order of removal (See page BR±51).
HINT:

After installation, fill the brake reservoir with brake fluid and bleed brake system (See page BR±4).

Check for leaks.
NOTICE:
In case of replacing the skid control ECU, perform the zero point calibration of the steering angle,
master cylinder pressure, yawrate and deceleration sensors (See page DI±897).

I28399
Fusible Link Block:
Relays: Fuses:
5. RR HEATER Fuse 30 A
A. C/OPN Relay
B. HEAD Relay
C. EFI Relay
D. FUEL PUMP Relay
E. DEFOG Relay
F. HORN Relay
Engine Room J/B6. R/B Fuse 30 A
7. A/PUMP Fuse 50 A
8. ABS Fuse 60 A
9. ALT Fuse 140 A
10. CDS FAN Fuse 25 A
11. Spare Fuse 15 A
12. Spare Fuse 20 A
13. Spare Fuse 30 A
14. Main Fuse 40 A
15. DOOR No. 2 Fuse 30 A
16. *2 H±LP RH Fuse 15 A
17. EFI No. 1 Fuse 20 A
18. ETCS Fuse 10 A19. *1.DRL Fuse 15 A
*2.H±LP LH Fuse 15 A
20. ALT±S Fuse 7.5 A
21. TOWING Fuse 30 A
22. ST Fuse 30 A
23. RAD No. 3 Fuse 30 A
24. TURN±HAZ Fuse 20 A
25. AM2 Fuse 25 A
26. EFI No. 2 Fuse 10 A
27. SHORT±PIN
28. HORN Fuse 10 A
29. MIR HTR Fuse 15 A
30. ECU±B Fuse 7.5 A
31. DOME Fuse 10 A
32. RAD No. 1 Fuse 20 A
*1 w/ Daytime Running Light
*2 w/o Daytime Running Light 15
16 17 18
19 20 21
262728
2930
A
B
C
D
EF 1
234
5
6789
10
22 2324 25
31
32
11
12
13141. TOWING R/B Fuse 50 A
2. AIR SUS Fuse 50 A
3. HEATER Fuse 50 A
4. DEFOG Fuse 40 A
± BODY ELECTRICALPOWER SOURCE
BE±17
3421 Author: Date:
2005 SEQUOIA (RM1146U)

BO45H±02
H24348
Front Bumper
Reinforcement
Front Bumper
Energy Absorber
Front Bumper Cover
Front Bumper
Hole Cover Front Bumper
Hole Cover
3.0 (30, 27 in.´lbf)
50 (510, 37)
N´m (kgf´cm, ft´lbf)
: Specified torque
3.0 (30, 27 in.´lbf)
7.0 (71, 62 in.´lbf)
50 (510, 37)
7.0 (71, 62 in.´lbf)
Fog Light
Fog Light Side Support
Side Support
w/o Fog light:
w/o Fog light:
w/ Fog light: w/ Fog light:
± BODYFRONT BUMPER
BO±5
3558 Author: Date:
2005 SEQUOIA (RM1146U)
FRONT BUMPER
COMPONENTS