Page 196 of 1897
I12543
E2 *2
E7 *2
C4
C7 ECU
ODO/TRIP
MODE
RESET/AD
SELECT
ON/OFF
Speed control
Unit
Open door indicator
SRS warning
SRS cut off indicator
(Passenger)
Discharge warning
Washer level warning
Low oil pressure warning
Passenger seat belt warning
VSC warning
CRUISE main indicator
ABS warning
VSC cut off warning
TRAC warning
Brake warning
Rear light indicator
Mulfunction indicator
Driver seat belt warning *1: Hi-Grade
*2: Lo-Grade
F4
F2 F7 G14 G4 F9 G7 F5 F3 F10 G10 F6F1 G8 G6 G2
G12 C11
*1
G13G5G3
G11 C18 BE-46
- BODY ELECTRICALCOMBINATION METER
1650 Author: Date:
2001 AVALON (RM808U)
Page 251 of 1897

BE1DL-01
I13328
w/ Sliding roof:
w/o Sliding roof:
N12373
ON
N20159
ON
OFFOhmmeter
I13329
ON
OFF
Z07389
- BODY ELECTRICALINTERIOR LIGHT SYSTEM
BE-31
1635 Author: Date:
2001 AVALON (RM808U)
INSPECTION
1. INSPECT FRONT PERSONAL LIGHT CONTINUITY
Switch positionTester connectionSpecified condition
OFF1 - 3No continuity
-2 - 3No continuity
ON1 - 3Continuity
If continuity is not as specified, replace the light assembly or
bulb.
2. INSPECT REAR INTERIOR LIGHT CONTINUITY
Switch positionTester connectionSpecified condition
OFF1 - 2No continuity
ON1 - 2Continuity
If continuity is not as specified, replace a bulb or rear personal
light.
3. INSPECT DOOR COURTESY SWITCH CONTINUITY
(a) Check that continuity exists between terminal and the
switch body with the switch ON (switch pin released:
opened door).
(b) Check that no continuity exists between terminal and the
switch body withe the swtich OFF (switch pin pushed in:
closed doors).
If operation is not as specified, replace the switch.
4. INSPECT VANITY LIGHT CONTINUITY
Switch positionTester connectionSpecified condition
OFF1 - 2No continuity
ON1 - 2Continuity
If continuity is not as specified, replace bulb or vanity light.
5. INSPECT LUGGAGE COMPARTMENT LIGHT CONTI-
NUITY
Switch positionTester connectionSpecified condition
OFF-No continuity
ON1 - 2Continuity
If continuity is not as specified, replace the light.
Page 253 of 1897
BE0I2-03
I12527
Front Personal Light
Vanity LightInterior Light Assembly
Door Courtesy LightDoor Courtesy Switch
Door Courtesy Light
Door Courtesy Switch
Driver Side Junction Block
DOME Fuse
Body ECU
Rear Interior Light Assembly
Luggage Compartment Light
BE-30
- BODY ELECTRICALINTERIOR LIGHT SYSTEM
1634 Author: Date:
2001 AVALON (RM808U)
INTERIOR LIGHT SYSTEM
LOCATION
Page 259 of 1897

I12841
UNLOCKLOCK1 2 3 4 5 6
BE1DY-02
I12842
LOCK
UNLOCK1 2 3 4 5 6
I12843
UNLOCK
1 2 3 4 5 6
I12844
UNLOCK
1 2 3 4 5 6
I07301
LOCK
BE-82
- BODY ELECTRICALPOWER DOOR LOCK CONTROL SYSTEM
1686 Author: Date:
2001 AVALON (RM808U)
INSPECTION
1. Driver 's door:
INSPECT DOOR KEY LOCK AND UNLOCK SWITCH
CONTINUITY
Switch positionTester connectionSpecified condition
LOCK3 - 5Continuity
OFF-No continuity
UNLOCK3 - 6Continuity
If continuity is not as specified, replace the switch.
2. Passenger 's Door:
INSPECT DOOR KEY LOCK AND UNLOCK SWITCH
CONTINUITY
Switch positionTester connectionSpecified condition
LOCK2 - 4Continuity
OFF-No continuity
UNLOCK1 - 4Continuity
If continuity is not as specified, replace the switch.
3. Driver 's Door:
INSPECT DOOR UNLOCK DETECTION SWITCH CON-
TINUITY
Switch positionTester connectionSpecified condition
OFF (Door Lock set to
LOCK)-No continuity
ON (Door Lock set to
UNLOCK)3 - 4Continuity
If continuity is not as specified, replace the switch.
4. Passenger 's Door:
INSPECT DOOR UNLOCK DETECTION SWITCH CON-
TINUITY
Switch positionTester connectionSpecified condition
OFF (Door Lock set to
LOCK)-No continuity
ON (Door Lock set to
UNLOCK)3 - 4Continuity
If continuity is not as specified, replace the switch.
5. Rear LH Door:
INSPECT DOOR UNLOCK DETECTION SWITCH CON-
TINUITY
Switch positionTester connectionSpecified condition
OFF (Door Lock set to
LOCK)-No continuity
ON (Door Lock set to
UNLOCK)1 - 2Continuity
If continuity is not as specified, replace the switch.
Page 260 of 1897

I07302
LOCK
I12845
UNLOCK
LOCK
UNLOCKLOCK
22
11
I12846
UNLOCK
LOCK
UNLOCK
LOCK
6565
- BODY ELECTRICALPOWER DOOR LOCK CONTROL SYSTEM
BE-83
1687 Author: Date:
2001 AVALON (RM808U)
6. Rear RH Door:
INSPECT DOOR UNLOCK DETECTION SWITCH CON-
TINUITY
Switch positionTester connectionSpecified condition
OFF (Door Lock set to
LOCK)-No continuity
ON (Door Lock set to
UNLOCK)3 - 4Continuity
If continuity is not as specified, replace the switch.
7. Driver 's Door:
INSPECT DOOR LOCK MOTOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
1 and the negative (-) lead to terminal 2, and check that
the door lock link moves to UNLOCK position.
(b) Reverse the polarity and check that the door lock link
moves to LOCK position.
If operation is not as specified, replace the door lock assembly.
8. Passenger 's door:
INSPECT DOOR LOCK MOTOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
5 and the negative (-) lead to terminal 6, and check that
the door lock link moves to UNLOCK position.
(b) Reverse the polarity and check that the door lock link
moves to LOCK position.
If operation is not as specified, replace the door lock assembly.
Page 261 of 1897

I07299
LOCK
UNLOCK
UNLOCKLOCK
2
11
2
I07300
LOCK
UNLOCK
UNLOCKLOCK
4
343
I12847
21
UNLOCK
LOCK BE-84
- BODY ELECTRICALPOWER DOOR LOCK CONTROL SYSTEM
1688 Author: Date:
2001 AVALON (RM808U)
9. Rear LH Door:
INSPECT DOOR LOCK MOTOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
1 and the negative (-) lead to terminal 2, and check that
the door lock link moves to UNLOCK position.
(b) Reverse the polarity and check that the door lock link
moves to LOCK position.
If operation is not as specified, replace the door lock assembly.
10. Rear RH door:
INSPECT DOOR LOCK MOTOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
4 and the negative (-) lead to terminal 5, and check that
the door lock link moves to UNLOCK position.
(b) Reverse the polarity and check that the door lock link
moves to LOCK position.
If operation is not as specified, replace the door lock assembly.
11. Using an ammeter:
INSPECT DRIVER'S DOOR PTC THERMISTOR OP-
ERATION
(a) Connect the negative (-) lead from the battery to terminal
2.
(b) Connect the positive (+) lead from the ammeter to termi-
nal 1 and the negative (-) lead to battery positive (+) termi-
nal, and check that the current changes from approxi-
mately 3.2 A to less than 0.5 A within 20 to 70 seconds.
Page 262 of 1897

I12848
2
1
LOCK
UNLOCK
I12849
5 6
UNLOCK
I12854
5
6
LOCK
I07307
2
1 UNLOCK
I07308
21 LOCK
- BODY ELECTRICALPOWER DOOR LOCK CONTROL SYSTEM
BE-85
1689 Author: Date:
2001 AVALON (RM808U)
(c) Disconnect the leads from terminals.
(d) Approximately 60 seconds later, connect the positive (+)
lead from the battery to terminal 2 and the negative (-)
lead to terminal 1, and check that the door lock moves to
the LOCK position.
If operation is not as specified, replace the door lock assembly.
12. Using an ammeter:
INSPECT PASSENGER'S DOOR PTC THERMISTOR
OPERATION
(a) Connect the negative (-) lead from the battery to terminal
6.
(b) Connect the negative (-) lead from the ammeter to termi-
nal 5 and the positive (+) lead to battery positive (+) termi-
nal, and check that the current changes from approxi-
mately 3.2 A to less than 0.5 A within 20 to 70 seconds.
(c) Disconnect the leads from terminals.
(d) Approximately 60 seconds later, connect the positive (+)
lead from the battery to terminal 6 and the negative (-)
lead to terminal 5, and check that the door lock moves to
the LOCK position.
If operation is not as specified, replace the door lock assembly.
13. Using an ammeter:
INSPECT REAR LH DOOR PTC THERMISTOR OP-
ERATION
(a) Connect the negative (-) lead from the battery to terminal
2.
(b) Connect the negative (-) lead from the ammeter to termi-
nal 1 and the positive (+) lead to battery positive (+) termi-
nal, and check that the current changes from approxi-
mately 3.2 A to less than 0.5 A within 20 to 70 seconds.
(c) Disconnect the leads from terminals.
(d) Approximately 60 seconds later, connect the positive (+)
lead from the battery to terminal 2 and the negative (-)
lead to terminal 1, and check that the door lock moves to
the LOCK position.
If operation is not as specified, replace the door lock assembly.
Page 263 of 1897

I07309
43 UNLOCK
I07310
43 LOCK
I12850
2 1
UNLOCK
I12851
21
LOCK
UNLOCK
I12852
5 6
UNLOCK
BE-86
- BODY ELECTRICALPOWER DOOR LOCK CONTROL SYSTEM
1690 Author: Date:
2001 AVALON (RM808U)
14. Using an ammeter:
INSPECT REAR RH PTC THERMISTOR OPERATION
(a) Connect the negative (-) lead from the battery to terminal
4.
(b) Connect the negative (-) lead from the ammeter to termi-
nal 3 and the positive (+) lead to battery positive (+) termi-
nal, and check that the current changes from approxi-
mately 3.2 A to less than 0.5 A within 20 to 70 seconds.
(c) Disconnect the leads from terminals.
(d) Approximately 60 seconds later, connect the positive (+)
lead from the battery to terminal 4 and the negative (-)
lead to terminal 3, and check that the door lock moves to
the LOCK position.
If operation is not as specified, replace the door lock assembly.
15. Using an ammeter with a current-measuring probe:
INSPECT DRIVER'S DOOR PTC THERMISTOR OP-
ERATION
(a) Connect the positive (+) lead from the battery to terminal
1 and the negative (-) lead to terminal 2.
(b) Attach a current-measuring probe to either the positive
(+) lead or the negative (-) lead, and check that the cur-
rent changes from approximately 3.2 A to less than 0.5 A
within 20 to 70 seconds.
(c) Disconnect the leads from terminals.
(d) Approximately 60 seconds later, reverse the polarity, and
check that the door lock moves to the LOCK position.
If operation is not as specified, replace the door lock assembly.
16. Using an ammeter with a current-measuring probe:
INSPECT PASSENGER'S DOOR PTC THERMISTOR
OPERATION
(a) Connect the positive (+) lead from the battery to terminal
5 and the negative (-) lead to terminal 6.
(b) Attach a current-measuring probe to either the positive
(+) lead or the negative (-) lead, and check that the cur-
rent changes from approximately 3.2 A to less than 0.5 A
within 20 to 70 seconds.