Page 1174 of 1897
H01016H08392H08396
P/T Squib (LH)
Airbag
Sensor
Assembly
PL+
(+)
(-)
DI-438
- DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
594 Author: Date:
2001 AVALON (RM808U)
DTC B0137/71 Short in P/T Squib (LH) Circuit (to
Ground)
CIRCUIT DESCRIPTION
The P/T squib (LH) circuit consists of the airbag sensor assembly and seat belt pretensioner (LH).
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS-3.
DTC B0137/71 is recorded when a ground short is detected in the P/T squib (LH) circuit.
DTC No.DTC Detecting ConditionTrouble Area
B0137/71
Short circuit in P/T squib (LH) wire harness (to ground)
P/T squib (LH) malfunction
Airbag sensor assembly malfunctionSeat belt pretensioner (LH)
Airbag sensor assembly
Wire harness
WIRING DIAGRAM
See page DI-431.
INSPECTION PROCEDURE
1 Prepare for inspection (See step 1 on page DI-475).
2 Check P/T squib (LH) circuit.
CHECK:
For the connector (on the seat belt pretensioner side) between
the seat belt pretensioner (LH) and the airbag sensor assembly,
measure the resistance between PL+ and body ground.
OK:
Resistance: 1 MW or Higher
NG Repair or replace harness or connector be-
tween seat belt pretensioner (LH) and airbag
sensor assembly.
OK
DI4D6-02
Page 1175 of 1897
H01017H02139AB0118AB0119R13006H01084H02216
P/T Squib (LH)Airbag
Sensor
Assembly
PL+
PL-ACC
or
DTC B0137/71ON " u
E1
Tc DLC1
- DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI-439
595 Author: Date:
2001 AVALON (RM808U)
3 Check airbag sensor assembly.
PREPARATION:
(a) Connect the connector to the airbag sensor assembly.
(b) Using a service wire, connect PL+ and PL- of the connec-
tor (on the seat belt pretensioner side) between the seat
belt pretensioner (LH) and the airbag sensor assembly.
(c) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
(a) Turn the ignition switch to ACC or ON and wait at least for
20 seconds.
(b) Clear the DTC stored in memory
(See step 5 on page DI-349).
(c) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d) Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
(e) Check the DTC (See page DI-349).
OK:
DTC B0137/71 is not output.
HINT:
Codes other than code B0137/71 may be output at this time, but
they are not relevant to this check.
NG Replace airbag sensor assembly.
OK
Page 1177 of 1897
H01016AB0119
H08394H08269
Airbag
Sensor
Assembly P/T Squib (LH)
PL+
(-) (+) ON
- DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI-441
597 Author: Date:
2001 AVALON (RM808U)
DTC B0138/72 Short in P/T Squib (LH) Circuit (to B+)
CIRCUIT DESCRIPTION
The P/T squib (LH) circuit consists of the airbag sensor assembly and seat belt pretensioner (LH).
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS-3.
DTC B0138/72 is recorded when a B+ short is detected in the P/T squib (LH) circuit.
DTC No.DTC Detecting ConditionTrouble Area
B0138/72
Short circuit in seat belt pretensioner (LH) wire harness
(to B+)
P/T squib (LH) malfunction
Airbag sensor assembly malfunctionSeat belt pretensioner (LH)
Airbag sensor assembly
Wire harness
WIRING DIAGRAM
See page DI-431.
INSPECTION PROCEDURE
1 Prepare for inspection (See step 1 on page DI-475).
2 Check P/T squib (LH) circuit.
CHECK:
(a) Turn the ignition switch to ON.
(b) For the connector (on the seat belt pretensioner side) be-
tween the seat belt pretensioner (LH) and the airbag sen-
sor assembly, measure the voltage between PL+ and
body ground.
OK:
Voltage: 0 V
NG Repair or replace harness or connector be-
tween seat belt pretensioner (LH) and airbag
sensor assembly.
OK
DI4D7-02
Page 1226 of 1897
DI-356
- DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
512 Author: Date:
2001 AVALON (RM808U)DTC No.
(See Page)
Detection ItemTrouble AreaSRS
Warning Light
B0117/45
(DI-412)Short in side squib (LH) circuit
(to ground)Side airbag assembly LH (squib)
Airbag sensor assembly
Wire harness
Blink
B0118/46
(DI-415)Short in side squib (LH) circuit
(to B+)Side airbag assembly LH (squib)
Airbag sensor assembly
Wire harness
Blink
B0130/63
(DI-418)Short in P/T squib (RH) circuitSeat belt pretensioner RH (squib)
Airbag sensor assembly
Wire harness
Blink
B0131/64
(DI-422)Open in P/T squib (RH) circuitSeat belt pretensioner RH (squib)
Airbag sensor assembly
Wire harness
Blink
B0132/61
(DI-425)Short in P/T squib (RH) circuit
(to ground)Seat belt pretensioner RH (squib)
Airbag sensor assembly
Wire harness
Blink
B0133/62
(DI-428)Short in P/T squib (RH) circuit
(to B+)Seat belt pretensioner RH (squib)
Airbag sensor assembly
Wire harness
Blink
B0135/73
(DI-431)Short in P/T squib (LH) circuitSeat belt pretensioner LH (squib)
Airbag sensor assembly
Wire harness
Blink
B0136/74
(DI-435)Open in P/T squib (LH) circuitSeat belt pretensioner LH (squib)
Airbag sensor assembly
Wire harness
Blink
B0137/71
(DI-438)Short in P/T squib (LH) circuit
(to ground)Seat belt pretensioner LH (squib)
Airbag sensor assembly
Wire harness
Blink
B0138/72
(DI-441)Short in P/T squib (LH) circuit
(to B+)Seat belt pretensioner LH (squib)
Airbag sensor assembly
Wire harness
Blink
B1100/31
(DI-444)Airbag sensor assembly malfunctionAirbag sensor assemblyON
B1140/32
(DI-446)Side airbag sensor assembly (RH)
malfunctionSide airbag sensor assembly (RH)
Airbag sensor assembly
Wire harness
Blink
B1141/33
(DI-454)Side airbag sensor assembly (LH)
malfunctionSide airbag sensor assembly (LH)
Airbag sensor assembly
Wire harness
Blink
B1156/B1157/
15
(DI-462)Front airbag sensor (RH) malfunctionFront airbag sensor (RH)
Airbag sensor assembly
Wire harness
ON
B1158/B1159/
16
(DI-467)Front airbag sensor (LH) malfunctionFront airbag sensor (LH)
Airbag sensor assembly
Instrument panel wire harness
Engine room main wire harness
ON
NlSystem normal-OFFNormal
(DI-475)Voltage source dropBattery
Airbag sensor assemblyON
Page:
< prev 1-8 9-16 17-24