2001 SUBARU LEGACY Owners Manual

Audio5-31
–
CONTINUED –
NOTE
If a disc is in the player, the “CD” button is used to change
from CD player operation to CD changer operation. Each time the
“CD” button is pressed, the operating mode will change alter-
nately. At the end of the disc, the player automatically continues with
the next disc. After playback on the last disc finishes, playback will automat-
ically return to the first disc. If you have loaded fewer than 6 discs, any missing disc is
automatically skipped. Selection of a desired disc
Briefly p ress the “ ” b utton
D to skip to the next d isc and b riefly
p ress the “ ” b utton to skip to the p revious d isc .
n Operation with the in-dash CD changer unit
Press the d esired “Disc selec t ” b utton (numb ered from 1 to 6) and the
d isc will b eg in to p lay. To select the desired disc
Press either the d isc up b utton “DISC ”
J or d isc d own b utton
“ DISC ” to selec t the d esired d isc . Eac h time the “DISC ” J b ut-
ton is p ressed , the ind ic ated d isc numb er will inc r ease. Eac h time the
“ DISC ” b utton is p ressed , the ind ic ated d isc numb er will d ec rease.
Constant p ressure on these b uttons c auses a c ontinu ous c hang e in
the d isc numb er. To select a song from its beginning
n Forward direction
Briefly p ress the “ ❚” b utton
Z to skip to the b eg inning of the next
trac k. Eac h time the b utton is p ressed , the ind ic at ed trac k numb er will
inc rease. n Backward direction
Briefly p ress the “❚ ” b utton
Z to skip to the b eg inning of the c ur-
rent trac k. Eac h time the b utton is p ressed , the in d ic ated trac k num-
b er will d ec rease.

5-32
Fast forwarding and fast reverse
n Fast forwarding
Press the “ ❚” b utton Z c ontinuously for more than 0.5 sec ond to
fast forward the d isc .
Release the b utton to stop fast forward ing .
If you c ontinue fast forward ing to the end of the d isc , the CD c hang er
will automatic ally stop fast forward ing and start p layb ac k b eg inning
with the first trac k on the c urrent d isc . n Fast reverse
Press the “❚ ” b utton
Z c ontinuously for more than 0.5 sec ond to
fast reverse the d isc .
Release the b utton to stop fast reverse.
If you c ontinue fast reverse to the b eg inning of th e d isc , the CD
c hang er will automatic ally stop fast reverse and st art p layb ac k b eg in-
ning with the first trac k on the c urrent d isc . Repeat playback
Press the “RPT ” b utton
L while a song is p laying to p lay the song
rep eated ly. The “RPT ” ind ic ator will c ome on and the song will b e
p layed c ontinuously. To c anc el the rep eat mod e, p re ss the b utton
ag ain. Then the “RPT ” ind ic ator g oes out, and normal p layb ac k mod e
is restored . Random playback
Press the “RAND ” b utton
K while a d isc is b eing p layed b ac k to p lay
all song s on the d isc in a rand om ord er. The “RAND ” ind ic ator will
c ome on and all song s on the d isc will b e p layed in a rand om ord er.
To c anc el the rand om mod e, p ress the b utton ag ain. Then the
“ RAND ” ind ic ator g oes out, and normal p layb ac k mod e is re stored .
Scan
When the “SCAN ” b utton
H is p ressed while the d isc is b eing p layed
b ac k, you c an hear the first 10 sec ond s of eac h tra c k to searc h for
the d esired p rog ram. To c ontinue listening to the p rog ram, p ress the
“ SCAN ” b utton ag ain. After all trac ks on the d isc have b e en sc anned ,
normal p layb ac k mod e is restored .

Audio5-33
–
CONTINUED –
Type D audio set (if equipped)
The aud io set will op erate only when the ig nition s
witc h is in the “ACC ” or
“ ON ” p ositions.
Radio operation
HB5043BB
1 Tuning b uttons
2 SCAN b utton
3 FM/AM selec tion b utton
4 Preset b uttons 5
AUDIO b utton
6 Power switc h and volume
c ontrol
Power switch and volume/bass/treble/fader/balance control
n Power switch and volume control (PWR/VOL)
The d ial 6 is used for b oth p ower (on/off) and volume c ontrol . The
rad io is turned on and off b y p ushing the d ial and the volume is c on-
trolled b y turning the d ial. Tone and balance control
The volume c ontrol d ial 6 normally func tions as a volume c ontrol.
This d ial b ec omes a c ontrol for Bass, Treb le, Fad er or Balanc e when
you selec t the ap p rop riate tone and b alanc e c ontrol mod e.

5-34Choose d esired volume level for eac h mod e b y turnin
g the volume
c ontrol d ial. The c ontrol func tion returns to volum e c ontrol mod e after
ab out 5 sec ond s.
To change control modes: Eac h b rief p ress of the “AUDIO ” b utton
5 c hang es c ontrol mod es in the following seq uenc e st arting from vol-
ume c ontrol mod e. (When the rad io is first turned o n, the c ontrol mod e
is in the volume c ontrol.)
Volume Bass Treb le Fad er Balanc e(VOL) (BAS) (TRE) (FAD) (BAL)
The “AUDIO ” b utton 5 is used for selec ting the following c ontrol
mod es:
Display
Control mode
HB5036BA
Turn counterclockwiseTurn clockwise
BASBass controlFor less bassFor more bass
TRETreble controlFor less trebleFor more treble
FA DFader controlTo increase rear speaker
volume and decrease front
speaker volumeTo increase front speaker
volume and decrease rear
speaker volume
BALBalance controlTo increase left speaker
volume and decrease right
speaker volumeTo increase right speakervolume and decrease left
speaker volume
VOLVolume controlFor less volumeFor more volume

Audio5-35
–
CONTINUED –

FM/AM selection button (FM/AM)
Push the “FM/AM ” b utton 3 when the rad io is on to selec t FM1, FM2
or AM rec ep tion. Eac h time this b utton is p ressed , the b and will
c hang e in the following ord er:
FM1 FM2 AM
The d isp lay ind ic ates whic h one is c urrently selec t ed .
Stereo indicator
The stereo ind ic ator “ST ” will c ome on when an FM stereo b road c ast
is rec eived . Manual tuning (TUNING)
Press the tuning b utton 1 marked “ ” to inc rease the tuning freq uen-
c y and p ress the tuning b utton marked “ ” to d ec rease it.
Eac h time the b utton is p ressed , the freq uenc y c han g es 10 kHz in the
AM mod e and 0.2 MHz in the FM mod e.
Constant p ressure on the b utton c auses a c ontinuous c hang e in the
freq uenc y. Automatic tuning (SCAN)
Press the “SCAN ” b utton
2 to c hang e the rad io to the SCAN mod e. In
this mod e, the rad io sc ans throug h the rad io b and u ntil a station is
found . The rad io will stop at the station for five sec ond s while d isp lay-
ing the freq uenc y, after whic h sc anning will c ontin ue until the entire
b and has b een sc anned from the low end to the hig h end .
Press the “SCAN ” b utton ag ain to c anc el the SCAN mod e and to stop
on any d isp layed freq uenc y.
When the “SCAN ” b utton is p ressed for automatic tuning , stations a re
sc anned in the d irec tion of low freq uenc ies to hig h freq uenc ies only.
Automatic tuning may not func tion p rop erly if the s tation rec ep tion is
weakened b y d istanc e from the station or p roximity to tall b uild ing s
and hills.

5-36
Selecting preset stations
Presetting a station with a p reset b utton 4 allows you to selec t that
station in a sing le op eration. Up to six AM, FM1 an d FM2 stations
eac h may b e p reset. How to preset stations
1. Press the “FM/AM ” selec tion b utton
3 to selec t FM1, FM2 or AM
rec ep tion.
2. Press the “SCAN ” b utton 2 or tune the rad io manually until the d e-
sired station freq uenc y is d isp layed .
3. Press one of the p reset b uttons 4 for at least two seconds to
store the freq uenc y. The freq uenc y of the station w ill flash onc e on the
d isp lay at this time. If the b utton is p ressed for less than two sec ond s,
the p rec ed ing selec tion will remain in memory.
NOTE If the connection between the radio and battery is broken for any
reason such as vehicle maintenance or radio removal, all stationsstored in the preset buttons are cleared. If this occurs, it is neces-sary to reset the preset buttons.

Audio5-37
–
CONTINUED –
Cassette player operation
HB5043CB
7 Ejec t b utton
8 Cassette slot 9
Fast-forward /Rewind b utton
(Prog ram switc hing b uttons)
Q Dolb y B NR b utton
NOTE Only use good quality cassettes (cassettes longer than C-90 are
not recommended). Put cassettes back in their boxes immediately after use to protect
them from dust and dirt and to prevent the tape from unwinding. Never expose cassettes to heat, direct sunlight or moisture.
Clean the tape head (once or twice a month) using a wet-type
cleaning cassette .
Cassette slot
Insert a c assette with the exp osed tap e sid e fac ing to the rig ht. After
inserting , p layb ac k starts. Tape travel indicators
The tap e travel ind ic ators ind ic ate the d irec tion t he c assette tap e is
moving . : Ind ic ates that the top sid e of the c assette is b eing p layed b ac k.
: Ind ic ates that the b ottom sid e of the c assette i s b eing p layed
b ac k.

5-38
Program switching buttons
When the p rog ram switc hing b uttons “
” and “” 9 , are
p ressed at the same time d uring p layb ac k, the tap e travel ind ic ators
will switc h and the p layer will b eg in p laying b ac k the op p osite sid e of
the tap e. The same mec hanism is automatic ally ac tiv ated when the
end of the tap e is reac hed . This allows the op p osit e sid e of the tap e
to p lay, p rovid ing c ontinuous p layb ac k. Fast-forward button
To fast-forward the tap e, p ress the “
” or “” b utton 9 in the
same d irec tion as the tap e travel ind ic ator. To sto p fast-forward ing ,
lig htly p ress the op p osite sid e of the “
” or “” b utton.
Rewind button
To rewind the tap e, p ress the “
” or “” b utton 9 in the d irec -
tion op p osite to the tap e travel ind ic ator. To stop rewind ing , lig htly
p ress the op p osite sid e of the “
” or “” b utton.
Eject button (
)
When the “
” b utton 7 is p ressed , p layb ac k stop s and the c assette
tap e is ejec ted .
Before the ig nition switc h is turned to the “OFF ” p osition, ejec t the
tap e from the p layer. Always make c ertain that you remove the c as-
sette tap e. Dolby BNR button (BNR)
Press “BNR ” b utton
Q when p laying tap es rec ord ed using the Dolb y
NR system*. The “BNR ” ind ic ator will lig ht up and hig h-freq uenc y
noise on the tap e will b e red uc ed for c learer sound rep rod uc tion.
* Noise red uc tion system manufac tured und er lic ense from Dolb y Lab oratories
Lic ensing Corp oration. “Dolb y ” and the d oub le-D Symb ol are trad e marks of
Dolb y Lab oratories Lic ensing Corp oration.
CD player operation (if optional CD player is connected)
An op tional CD p layer c an b e c onnec ted to this aud i o unit. See your
SUBARU d ealer for more information. For CD p layer o p eration p roc e-
d ures, refer to “CD p layer 2 ” in this c hap ter.