2001 Lexus ES300 Owner's Manuals (in English)

STARTING AND DRIVING
288
31E008

1Brake pedal 2ªDº (Drive) position
2. With your foot holding down the brake pedal, shift
the selector lever to ªDº.
CAUTION
Never put your foot on the accelerator pedal while
shifting.

STARTING AND DRIVING
289
3. Release the parking brake and brake pedal.
Depress the accelerator pedal slowly for smooth
starting.
The vehicle will start in the first gear and automatically
shift to the most suitable gear for the running conditions,
such as the vehicle speed, hill climbing, hard towing, etc.
However, while the engine coolant temperature is low
and the vehicle is traveling at low speed, the
transmission will not shift into the overdrive gear even
with the overdrive on.
When the lever is in the ªDº position, the automatic
transmission system will select the most suitable gear
for the running conditions such as hill climbing, hard
towing, etc.
If you need to accelerate rapidly while driving, push the
accelerator pedal all the way to the floor. The
transmission will automatically downshift to the third,
second or first gear, according to the vehicle speed.
If engine braking is needed, such as in descending a
long hill, see ª(c) Using engine brakingº.

STARTING AND DRIVING
290
(c) Using engine braking
31E009±2

STARTING AND DRIVING
291
To use the braking power of the engine, downshift the
transmission in the way described below:
1
Push the overdrive switch. (This is effective only
when you are driving in the ªDº position.) The ªO/D
OFFº indicator light in the instrument cluster will
come on and the transmission will downshift to third
gear.
When the cruise control is being used, even if you
downshift the transmission by pushing and
releasing the overdrive switch, engine braking will
not be enabled because the cruise control is not
cancelled. If you need to decrease the vehicle
speed, see page 300.
2 Shift into the ª2º position. The transmission will
downshift to second gear when the vehicle speed
is lower than 120 km/h (75 mph) and stronger
engine braking will be enabled.
3Shift into the ªLº position. The transmission will
downshift to first gear when the vehicle speed is
lower t han 55 km/h (34 mph) and maximum engine
braking will be enabled.
CAUTION
Be careful when downshifting on a slippery surface.
The abrupt change in engine speed could cause the
vehicle to spin or skid.

STARTING AND DRIVING
292
(d) Using the ª2º and ªLº positions
The ª2º and ªLº positions are used for strong engine
braking as described previously.
With the selector lever in ª2º or ªLº, you can start the
vehicle in motion as with the lever in ªDº.
With the selector lever in ª2º, the vehicle will start in first
gear and automatically shift to second gear.
With the selector lever in ªLº, the transmission is
engaged in first gear.
NOTICE
Be careful not to over±rev the engine. Watchthe tachometer to keep engine rpm from goinginto the red zone. The approximate maximumallowable speed for each position is givenabove for your reference.
ª2º 128 km/h (80 mph) . . .
ªLº 71 km/h (44 mph) . . .
Do not continue hill climbing or hard towing for
a long time in the ª2º or ªLº position. This maycause severe automatic transmission damagefrom overheating. To prevent such damage,
ªDº position should be used in hill climbing orhard towing.

STARTING AND DRIVING
293
(e) Backing up
31E010

1Brake pedal 2ªRº (Reverse) position
1. Bring the vehicle to a complete stop.
2. With the brake pedal held down with your foot, shift
the selector lever to the ªRº position.
NOTICE
Never shift into reverse while the vehicle ismoving.

STARTING AND DRIVING
294
(f) Parking
31E011±1

1Brake pedal 2Parking brake pedal
3ªPº (Park) position
1. Bring the vehicle to a complete stop.
2. Depress the parking brake fully to securely apply the
parking brake.
3. With the brake pedal held down with your foot, shift
the selector lever to the ªPº position.
CAUTION
Never attempt to move the selector lever into ªPº under
any circumstances while the vehicle is moving. Serious
mechanical damage and loss of vehicle control may
result.

STARTING AND DRIVING
295
(g) Good driving practice
If the transmission repeatedly shifts up and down
between the third and overdrive gears when climbing
a gentle slope, the overdrive should be turned off. Be
sure to turn the switch on immediately after climbing
the slope.
 When towing a trailer, in order to maintain efficient
engine braking and electrical charging performance,
do not use overdrive.
CAUTION
Always keep your foot on the brake pedal while stopped
with the engine running. This prevents the vehicle from
creeping.
NOTICE
Do not hold the vehicle on an upgrade with the accelerator pedal. This can cause thetransmission to overheat. Always use the brakepedal or parking brake.
(h) Rocking your vehicle if stuck
CAUTION
If your vehicle becomes stuck in snow, mud, sand, etc.,
then you may attempt to rock the vehicle free by moving
it forward and backward. Do not attempt this procedure
if people or objects are anywhere near the vehicle.
During the rocking operation the vehicle may suddenly
move forward or backward as it becomes un±stuck,
causing injury or damage to nearby people or objects.