2001 LAND ROVER FREELANDER remove seats

SEATS
76-5-4 REPAIRS
12.Remove 12 hog rings securing cover to
cushion.
13.Remove cushion cover from cushion.
Refit
1.Position cushion cover to cushion pad and
secure to frame with hog rings in position noted
during removal.
2.Position and secure cushion cover and pad to
frame.
3.Fit squab frame to cushion frame and tighten
Torx bolts to 45 Nm (33 lbf.ft).
4.Connect multiplugs.
5.Position multiplug to frame and secure clips.
6.Fit recline control knob.
7.Fit side covers and secure retaining studs.
8.Fit front seat.

+ SEATS, REPAIRS, Front seat.
Cover - rear seat cushion - RH
$% 78.40.04
Remove
1.Remove RH rear seats.

+ SEATS, REPAIRS, Rear seat - RH.
2.Remove 2 screws and remove seat belt reel
cover.
3.Remove nut and release seat belt reel.

SEATS
REPAIRS 76-5-5
4.Remove 5 screws and remove both end
covers.
5.Remove 3 Torx bolts and remove squab from
cushion.
6.Release rear of cushion cover from frame.
7.Release sides and front of cushion cover from
frame.
8.Release cover and pad from frame.9.Remove 2 Torx bolts from seat belt and buckle
and remove seat belt and buckle from frame.
10.Remove cushion cover and pad.
11.Remove and discard 17 hog rings and remove
cover from pad.
Refit
1.Position cushion cover to cushion pad and
secure to frame with hog rings in position noted
during removal.
2.Position seat belt and buckle to frame and
tighten to 32 Nm (24 lbf.ft).
3.Fit squab cover and pad to frame.
4.Fit front and sides of cushion cover to frame.
5.Fit rear of cushion cover to frame.
6.Fit cushion to squab and tighten Torx bolts to
28 Nm (21 lbf.ft).
7.Fit end covers and tighten screws.
8.Position seat belt reel in seat squab and tighten
nut to 32 Nm (24 lbf.ft).
9.Fit seat belt reel cover and tighten screws.
10.Fit rear seat.

+ SEATS, REPAIRS, Rear seat - RH.

SEATS
76-5-6 REPAIRS
Cover - rear seat cushion - LH
$% 78.40.05
Remove
1.Remove LH rear seat.

+ SEATS, REPAIRS, Rear seat - LH.
2.Remove 5 screws and remove both end
covers.
3.Remove 3 Torx bolts and remove squab from
cushion.4.Release rear of cushion cover from frame.
5.Release sides and front of cushion cover from
frame.
6.Remove cushion cover and pad.
7.Remove and discard 16 hog rings and remove
cover from pad.
Refit
1.Position cushion cover to cushion pad and
secure to frame with hog rings in position noted
during removal.
2.Fit cover and pad to frame.
3.Fit front and sides of cushion cover to frame.
4.Fit rear of cushion cover to frame.
5.Fit cushion to squab and tighten Torx bolts to
28 Nm (21 lbf.ft).
6.Fit end covers and tighten screws.
7.Fit rear seat.

+ SEATS, REPAIRS, Rear seat - LH.

SEATS
REPAIRS 76-5-7
Cover - cushion - rear single seat - 3 door
$% 78.40.08
Remove
1.Remove rear seat assembly.

+ SEATS, REPAIRS, Cushion & squab
- rear seat - bench type - 3 door.
2.Remove 2 screws securing console cover and
remove cover.
3.Remove 4 screws and remove rear seat centre
console.
4.Remove 4 screws securing end covers and
remove covers.
5.Remove 4 Torx bolts and remove squab
assembly from cushion assembly.6.Release back board assembly from squab
frame and remove back board.
7.Release rear of cushion cover from frame.
8.Release sides and front of cushion cover from
frame.

SEATS
76-5-8 REPAIRS
9.Remove cover and pad from frame.
10.Remove and discard 13 hog rings and remove
cover from pad.
Refit
1.Position cushion cover to pad and secure with
hog rings.
2.Fit cover to pad.
3.Position and secure cushion cover and pad to
frame.
4.Fit cushion to squab and tighten Torx bolts to
28 Nm (21 lbf.ft).
5.Position back board and secure to frame.
6.Fit end covers and tighten screws.
7.Position rear seat console and secure with
screws.
8.Position console cover and secure with screws.
9.Fit rear seat.

+ SEATS, REPAIRS, Cushion & squab
- rear seat - bench type - 3 door.
Finisher - seat base - front - each
$% 78.55.01
Remove
1.Remove front seat cushion side finisher.

+ SEATS, REPAIRS, Finisher -
cushion side - front seat.
2.Release cover to access Torx screw under
front seat and remove Torx screw.
3.Remove 2 Torx screws securing finisher to seat
runner.
4.Remove finisher.
Refit
1.Position finisher to seat runner.
2.Fit and tighten Torx screws.
3.Fit and tighten Torx screw under front seat and
close cover.
4.Fit front seat cushion side finisher.

+ SEATS, REPAIRS, Finisher -
cushion side - front seat.

SEATS
REPAIRS 76-5-9
Finisher - cushion side - front seat
$% 78.55.06
Remove
1.Remove 2 covers to access screws.
2.Remove 3 screws securing finisher.
3.Release clips at front and side of seat and
remove finisher.
Refit
1.Fit finisher to seat and secure with clips and
screws.
2.Fit screw covers.
Manual mechanism - lumbar support -
front seat
$% 78.60.07
Remove
1.Remove front seat.

+ SEATS, REPAIRS, Front seat.
2.Release and remove head restraint.
3.Remove recline control knob.
4.Release retaining studs from side covers and
remove covers.
5.Remove 4 Torx bolts from squab frame and
remove squab frame from cushion frame.
6.Remove lumbar control knob.
7.Release squab cover at base of seat frame.

SEATS
76-5-10 REPAIRS
8.Release squab cover from squab frame and
squab pad.
9.Drill out 2 pop rivets from squab frame.
10.Remove both head restraint guide tubes.
11.Remove squab cover and pad from frame.12.Remove 2 bolts from cable control and release
cable control.
13.Release 8 lumbar support retainers from squab
frame and collect 4 hook retainers.
14.Remove lumbar support mechanism.
Refit
1.Position lumbar support to squab frame and
locate hook retainers
2.Fit lumbar support retainers to squab frame.
3.Position cable control and tighten bolts.
4.Fit squab cover and pad to frame.
5.Fit head restraint guide tubes.
6.Position straps and secure with pop rivets.
7.Fit squab cover to squab pad and squab frame.
8.Secure squab cover at base of squab frame.
9.Fit lumbar support control knob.
10.Fit squab frame to cushion frame and tighten
Torx bolts to 45 Nm (33 lbf.ft).
11.Fit side covers and secure retaining studs.
12.Fit head restraint.
13.Fit recline control knob.
14.Fit front seat.

+ SEATS, REPAIRS, Front seat.

SEATS
REPAIRS 76-5-11
Latch - rear squab - RH
$% 78.80.05
Remove
1.Remove rear seat squab cover.

+ SEATS, REPAIRS, Cover - squab -
rear seat - RH.
2.Remove 2 Torx screws from squab lock.
3.Remove 3 screws from lock button.
4.Release cable from lever abutment and remove
latch assembly.
Refit
1.Position latch assembly to frame and locate
cable in abutment.
2.Fit Torx screws to squab lock and tighten to 20
Nm (15 lbf.ft).
3.Fit screws to lock button.
4.Fit squab cover.

+ SEATS, REPAIRS, Cover - squab -
rear seat - RH.
Latch - rear squab - LH
$% 78.80.16
Remove
1.Remove rear seat squab cover.

+ SEATS, REPAIRS, Cover - squab -
rear seat - side - LH.
2.Remove 2 Torx screws from squab lock.
3.Release cable from lever abutment.
4.Remove lock and cable from frame.
Refit
1.Position lock and cable to frame.
2.Fit and tighten Torx screws to lock.
3.Fit cable to lever abutment.
4.Fit squab cover.

+ SEATS, REPAIRS, Cover - squab -
rear seat - side - LH.