GENERAL DATA
04-3
Main bearings
Quantity 5 (4 main, 1 thrust)
Type Grooved shells in crankshaft, plain shells in main bearing caps
Ground sizes of main bearing journals:
Standard:
⇒ Yellow 59.977 - 59.983 mm (2.3613 - 2.3615 in)
⇒ Green 59.970 - 59.976 mm (2.3610 - 2.3613 in)
⇒ White 59.964 - 59.970 mm (2.3608 - 2.3610 in)
1st Undersize (0.25):
⇒ Yellow 59.727 - 59.733 mm (2.3515 - 2.3517 in)
⇒ Green 59.720 - 59.726 mm (2.3512 - 2.3514 in)
⇒ White 59.714 - 59.720 mm (2.3509 - 2.3512 in)
2nd Undersize (0.50):
⇒ Yellow 59.477 - 59.483 mm (2.3416 - 2.3418 in)
⇒ Green 59.470 - 59.476 mm (2.3413 - 2.3416 in)
⇒ White 59.464 - 59.469 mm (2.3411 - 2.3413 in)
Crankshaft radial bearing play 0.027 - 0.063 mm (0.0011 - 0.0025 in)
Connecting Rods
Type Forged H-sections, horizontally split big-end, plain small-end
Distance between centres 135 mm (5.32 in.)
Parallel deviation 0.05 mm (0.002 in)
Parallel distortion 0.5 mm (0.02 in)
Big-end bearings
Quantity 4
Material Sputter bearing on rod end halves
Gudgeon pins
Type Fully floating, retained by circlips
Bush bore diameter 30.008 - 30.015 mm (1.1814 - 1.1817 in.)
Fit in connecting rod Press fit
Length 65 mm (2.56 in.)
Pistons
Type Graphite compound skirt with recessed combustion chamber in crown
and oil cooling channel
Piston running clearance 0.036 - 0.072 mm (0.0014 - 0.0028 in)
Maximum clearance in cylinder bore (engine run in) 0.15 mm (0.006 in)
Piston diameter
†:
⇒ Standard 83.950 ± 0.009 mm (3.3051 ± 0.0004 in)
⇒ Intermediate 84.030 ± 0.009 mm (3.3083 ± 0.0004 in)
⇒ 1st Oversize 84.200 ± 0.009 mm (3.3150 ± 0.0004 in)
†measured 12 mm (0.47 in) from bottom of skirt and 90° to gudgeon pin:
GENERAL DATA
04-35
Dimensions
* At EEC kerb weight
Overall length (inc. 195/80 spare wheel/tyre):
⇒ K1.8 4368 mm (14 ft 4 in)
⇒ KV6 4433 mm (14 ft 7 in)
⇒ Td4 4368 mm (14 ft 4 in)
Overall width (including mirrors 2.068 m (6 ft 9.4 in)
Overall height (including roof bars and cross rails)* 1.708 m (5 ft 7.2 in)
Overall height (including roof bars and cross rails)*
⇒ 3 door 1.808 m (5 ft 11.2 in)
⇒ 5 door 1.828 m (5 ft 11.9 in)
Ground clearance (minimum)*: 186 mm (7.3 in)
Wading depth (maximum) 400 mm (15.7 in)
Wheelbase 2.557 m (8 ft 4.7 in)
Maximum approach angle
*30.5°
Maximum departure angle (with towbar)
*24°
Maximum departure angle (without towbar)
*33.9°
Maximum breakover angle 24°
Track:
⇒ Front
⇒ Rear1534 mm (60.4 in)
1545 mm (60.8 in)
